Audited Supplier
on-Line/off-Line Service
2 Year
Worktable Milling Machine
Gear
Bed type
Vertical Milling Cutter
Indexable Type
Artificial
Manual
Precision
CE, ISO 9001
New
350
350
8(Eight Steps)
F25-285mm/Min
1000mm/Min
6
14
45
750X260
7:24 Is040
200
1.5
8
110-1230r/Min
8
Vedon
Wood Box
1450x1445x1650mm
Tengzhou City, Shandong Province, China
8459290000
Product Description
X8126 Universal milling machine
1,Novel structure, wide versatility, high precision, easy to operate.
2,The use of a variety of accessories, can expand the scope of use, improve the utilization rate.
3,X8126: equipped with programmable digital display system, wide grid ruler resolution is 0.01mm.
Matters Needing Attention:
1,Loading and unloading parts, must remove the tool, cutting head, hand must not be close to the milling surface.
2,When using the milling machine to the knife, it must be slow or hand into, no fast forward, no stopping when walking the knife.
3,Fast advance and retreat knife pay attention to whether the milling machine handle will hit people.
4,Feed not too fast, no sudden change, milling machine limit block should be adjusted.
5,Up and down and measuring the workpiece, adjusting the tool, fastening the speed, must stop the milling machine.
6,Disassemble the end mill, the working table should be covered with wood, disassemble the milling cutter nut, the force should not be too strong.
7,Do not touch or use cotton yarn to wipe the rotating parts and tools, do not use the hand to support the cutter.
2,When using the milling machine to the knife, it must be slow or hand into, no fast forward, no stopping when walking the knife.
3,Fast advance and retreat knife pay attention to whether the milling machine handle will hit people.
4,Feed not too fast, no sudden change, milling machine limit block should be adjusted.
5,Up and down and measuring the workpiece, adjusting the tool, fastening the speed, must stop the milling machine.
6,Disassemble the end mill, the working table should be covered with wood, disassemble the milling cutter nut, the force should not be too strong.
7,Do not touch or use cotton yarn to wipe the rotating parts and tools, do not use the hand to support the cutter.
| (X8126A Technical Parameters) | |
| Item | Details |
| Distance from horizontal spindle centerline to table surface | First installation position35-385mm Second installation position42-392mm Third installation position132-482mm |
| Longitudinal stroke of table(mm) | 350 |
| Lifting stroke of table(mm) | 350 |
| Table feeding steps | 8(Eight steps) |
| Table longitudinal and lifting feed range | 25-285mm/min |
| Table speed of vertical and vertical rapid movement | 1000mm/min |
| Number of T-slot | 6 |
| Width of T-slot(mm) | 14 |
| Distance of T-slot(mm) | 45 |
| Table size(longxwide)(mm) | 750x260 |
| Number of T-slot | 5 |
| Width of T-slot (mm) | 14 |
| Distance ofT-slot(mm) | 45 |
| Spindle taper of X8126A | 7:24 IS040 |
| Lateral movement stroke of spindle (mm) | 200 |
| Travel per revolution of the dial(mm) | 1.5 |
| Spindle speed steps | 8 |
| Spindle speed range | 110-1230r/min |
| Spindle feeding steps | 8 |
| Spindle feed range | 25-285mm/min |
| Spindle taper | 7:24 IS040 |
| Manual axial movement of the spindle (mm) | 80 |
| The movement of each grid on the dial(mm) | 0.5 |
| Spindle body rotation angle | -45 |
| Spindle speed level | 8 |
| Spindle speed range | 150-1660r/min |
| Distance from the centerline of the horizontal spindle to the lower plane of the upper beam(mm) | 96 |
| Distance fromthe front edge of the horizontal tableand thefront plane of the vertical guide rail of the bed due todifferent installation positions(mm) | 212-412 |
| Distance between the centerline of the vertical spindle andthe front plane of the vertical guide rail of the bed(mm) | 155 |
| Distance between the lower end face of the vertical spindleand the plane on the horizontal table(mm) | 0-285 |
| Total power capacity(kVA) | 4 |
| Main motor power(kw) | 3 |
| Main motor speed(r/min) | 1430 |
| Cooling water pump motor(w) | 40 |
| Machine tool dimensions(longxwide xhigh)(mm) | 1450x1445x1650 |
Shandong Vedon Intelligent Equipment Co., Ltd., We Specialize In The Design And Manufacturing Of High-Precision Cnc Machines For Metalwork Processing. Including 5 Axis Machining Center, Gantry Type Machining Center, Horitonal Type Machining Center, Vertical Machining Center, Cnc Lathe Etc.. With A Strong Focus On Innovation, Quality, And Reliability, Our Advanced Cnc Equipment Enables Precision And Efficiency In Every Application. Whether For Small-Scale Operations Or Large Industrial Projects, We Deliver State-Of-The-Art Solutions Tailored To Meet The Diverse Needs Of The Metalworking Industry. Powered By Cutting-Edge Technology And A Commitment To Excellence, We Are Dedicated To Enhancing Productivity And Driving Success For Our Global Clients.
Q1. Could I put my LOGO on it or paint my own color?
A: Yes, As long as the order quantity reach to the MOQ.
Q2. What's your trade terms?
A: FOB, CIF, DAP or other terms are acceptable.
Q3. Could I order trail small order?
A: Yes,we have no MOQ for standard version products. The price is different from different order quantity.
Q4. What points need to be confirmed before placing the order?
A: Voltage, frequency, plug type trade term and have shipping agent or not.
Q5. What is your terms of payment ?
A: Payment≤1000USD, 100% in advance. Payment≥1000USD, 30% T/T in advance, 70% before shippment. If you have another question, pls feel free to contact us as below.
