Audited Supplier
The inductance is close to the switch which is a non-touch point switch (that is, switch-type sensor). It is generally used in the highly accurate requirements for positioning, long service life, fast response speed, and convenient mechanical automatic control equipment. It is mainly used as a limit, reset, itinerary positioning, counting, automatic protection, and replacement micro switch. The inductor close to the switch sensor must be a metal object. For non-metallic objects, the inductance is close to the switch without action. It has the characteristics of being waterproof, shock-proof, oil-proof, dustproof, corrosion resistant, and has strong applicability to harsh environments.
The inductive sensor product features :
1. The inductive sensor has no active electrical contact, long service life, and a relatively simple structure.
2. Strong output signal and high voltage sensitivity.
3. You can feel the mechanical displacement and weak angle when using it.
4. Within the displacement range, the output characteristics are good and linear and the output is stable.
5. The disadvantage of an inductive sensor is that the communication signal is zero, which is not suitable for the measurement of high dynamic frequency.
IM series proximity sensor
Features of the metal cylindrical proximity sensor
Reverse polarity protection;
Short-circuit protection (M8,M12,M18,M30 DC type);
Long life & high reliability;
Yellow Led indicates the working status of the sensor;
Economical and easy to operate;
Alternatives for mini switch and limit switch;
Delay at power-up, guard against false pulse;
| Parameter | ||
| Proximity Switch | IM12 DC3-wires standard distance | |
| Standard detection object | 12mm×12mm×1mm (Fe360 carbon steel) | |
| Detection distance | embedded | 2mm±10% |
| exposed | 4mm±10% | |
| Hysteresis | ≤15% | |
| Set distance | embedded | 0-1.6mm |
| exposed | 0-3.2mm | |
| Supply voltage | 10~30V DC | |
| Un-load current | Max.5mA | |
| Voltage drop | Max.1.4V | |
| Switch frequency | embedded | 500Hz |
| exposed | 500Hz | |
| Control output | Transistor output, open collector | |
| Resistive load | Max.200mA | |
| Insulation resistance | Min.20MΩ(at 500VDC/1000VDC) | |
| Withstand voltage | 500VDC/1000VDC | |
| Anti-vibration | ≤10~55Hz sweep frequency(Range:1mm) | |
| Shock resistance | Detection head:300m/s² about30G,housing:1000m/s² about100G | |
| Indicator | Operation indicator: Yellow | |
| Protection circuit | Over-voltage ,short circuit, and reverse polarity protection | |
| Ambient temperature | -25ºC~70ºC (No-freezing) | |
| Storage temperature | -30ºC~80ºC (No-freezing) | |
| Humidity | 35~95%RH | |
| Housing material | Cr plated on CU | |
| Thread specification | M12×1 | |
| Cable | Φ4, 3×0.2mm² | |
| Protection rating | IP67 (IEC) | |
| Model | ||
| Installment | Product Model | Output Mode |
Embedded type | IM12B-02-NO | NPN Normal open(NO) |
| IM12B-02-NC | NPN Normal close(NC) | |
| IM12B-02-PO | PNP Normal open(PO) | |
| IM12B-02-PC | PNP Normal close(PC) | |
Exposed type | IM12N-04-NO | NPN Normal open(NO) |
| IM12N-04-NC | NPN Normal close(NC) | |
| IM12N-04-PO | PNP Normal open(PO) | |
| IM12N-04-PC | PNP Normal close(PC) | |
Tianjin G-TEK sensor technology co..ltd is indicated in providing intelligent sensor products and customized solutions for logistics automation, factory automation and process automation. The predecessor of the company is Tianjin G-TEK automation technology Co.,ltd, a professional sensor manufacturer and sensor solution provider, which was established in 2003 with business ranges from Proximity switches, photoelectric sensors, measurement, and safety light curtains to Laser rangefinder sensors, laser radar., etc and serves for Intelligent buildings, intelligent transportation, logistics automation, factory automation and industry robot fields.
Tianjin G-TEK sensor technology co.,ltd was established in 2014 in Xiqing District, Tianjin City and it will fully inherit and expand the original G-TEK automation business with the construction and operation of the new R&D and manufacturing base.
Q: Is the product shipped and arrived fast?
A: The production cycle for large quantities of products takes 15-30 days, depending on the product.
Q: Can you provide professional advice in a timely manner?
A: We have a professional technical team that can patiently help you answer all professional questions.
Q: Can you provide customized products/services?
A: Yes, we can provide customized products, but the customization needs to meet a certain quantity.
Q: How is the quality of the product? Is the quality stable?
A: G-TEK Sensors has been focusing on the sensor field for 23 years. The quality of the sensor has the double affirmation of the CE certificate and customer reputation.
Q: What is your MOQ?
A: We offer MOQ per piece; it depends on your specific order.
Q: Is there any relevant terms of service and warranty information?
A: We offer a warranty on all items. The sensor products are guaranteed for 15 months, and the light curtain and lidar products are guaranteed for 18 months. For after-sales questions, you can directly contact the product salesperson.
Q: Is there any relevant information available for download on the website?
A: Yes, if you want to download the relevant product manual, you can go to our official website to download it.
Q: Can I be your reseller?
A: Yes, we are looking for distributors in overseas markets.
