Audited Supplier
MF1602
600ml
White
24 Hours
Composite Materials
Construction, Industrial
Silicone Sealant
Fluid
Mildew Proof
Glass
Organic Material
Architecture
SILANDE
Carton
600ml / 20 pcs/carton
China
3506919010
Product Description
MF1601 prefabricated building silicon modified polyether sealant
MF1601 prefabricated building silicone modified polyether sealant is a one-component, room temperature curing neutral sealant. The product does not contain toxic and harmful substances, and has no pollution to the environment. It has good bonding ability to most building materials such as glass, aluminum, stone, concrete, cement, etc., and can be widely used in various indoor filling and sealing of residential industrialization. , Building materials bonding and other fields. With low modulus and good permanent deformation characteristics, it can adapt well to the displacement of cement concrete joints.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
PACKAGING
A: 265KG B: 19KG
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
Storage and Expiration Date
The packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the product package.
Package
Plastic tube packing: 300ml each, 25 soft packs per box Packing: 600ml each, 20 pieces per box
Use Restriction
Not suitable for glass mounting purposes;
It is not suitable for use in tight and unventilated places, because the sealant needs to absorb moisture in the air to solidify;
Not suitable for continuous immersion or wet places all year round;
It is not suitable for use on materials that ooze grease, plasticizers or solvents, such as the surface of oil-impregnated wood;
Not suitable for bonding polypropylene, polyethylene, and polytetrafluoroethylene;
When the surface temperature of the material is lower than 5ºC or higher than 40ºC, it is not suitable for construction;
When using lighter color sealant, avoid contact with acidic or alkaline substances (such as exterior wall cleaning fluid) to avoid discoloration.
When bonding cement and concrete substrates, the substrate must be completely dried and cured for 7 days before construction, otherwise the bonding performance will be affected.
Safety Instructions
This product is non-toxic after fully cured, but it should avoid contact with eyes before curing. If contact with eyes, please rinse with plenty of water and seek medical treatment; uncured products should avoid contact with children.
Technical Services
Provide complete product technical information.
Adhesion test and compatibility test.
The company's laboratory can provide customers with pollution tests. Customers can mail (or in other forms) the base materials selected in the project to us. The company's laboratory will conduct pollution tests and issue a written test report.
MF1601 prefabricated building silicone modified polyether sealant is a one-component, room temperature curing neutral sealant. The product does not contain toxic and harmful substances, and has no pollution to the environment. It has good bonding ability to most building materials such as glass, aluminum, stone, concrete, cement, etc., and can be widely used in various indoor filling and sealing of residential industrialization. , Building materials bonding and other fields. With low modulus and good permanent deformation characteristics, it can adapt well to the displacement of cement concrete joints.
Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel.
Excellent temperature stability: - 60°C t 1ao0c.
High level of mechanical properties.
High elasticity and high modulus.
Resistant to ozone.
| TEST ITEMS | TEST RESULTS | TESTS1ANDARD |
| Base | Polyisobutylene (PIB) | - |
| Color | Black | - |
| Appearance | Solid mass | GB/T 1033.1 |
| Density | 1.1/1.25 fe/cm3] | JC/T914 |
| Shear Strength | 0.21 MPa | |
| Penetration (1 /1 Omm) | 25°C 40 | |
| 130°C 290 | JC/T 914 | |
| Volatile Content | Max. 0.02 % | |
| Fogging | Without visual fogging | - |
| Moisture Vapour Transmission Rate (MVTR) | 0.26 [gr/m2.24hrs. 2mm] | EN1279-4 |
| Gas Permeation Rate (Ar) | 1.30x10-3[gi7m2. hrs] | EN1279-4 |
.APPLICATION FIELD
- One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.
- It can keep its plastic and sealing properties in a wide temperature range.
- Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
- Minimum moisture vapour and gas permeation.
- Excellent temperature stability: - 30°C to 80°C.
PACKAGING
A: 265KG B: 19KG
MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
According to standards: GB 16776, GB/T 2406, GB/T 2408
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
It can be used at 10ºC~50ºC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materials
Neutral fast curing, no corrosion to the adhered surface
Good resistance to high and low temperature, keep good performance at -60ºC~200ºC
Excellent flame retardancy
No pollution to the environment
Excellent weather resistance and UV aging resistance
Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.
Big drum packaging: A component 200L iron drum
B component 20L plastic bucket
Medium drum packaging: A 20L plastic drum
310ml plastic tube for component B
Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.
Features:
Heat insulation and high efficiency shielding of ultraviolet rays
High light transmittance to prevent condensation
Efficient sound insulation, energy saving and environmental protection
Storage and Expiration Date
The packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the product package.
Package
Plastic tube packing: 300ml each, 25 soft packs per box Packing: 600ml each, 20 pieces per box
Use Restriction
Not suitable for glass mounting purposes;
It is not suitable for use in tight and unventilated places, because the sealant needs to absorb moisture in the air to solidify;
Not suitable for continuous immersion or wet places all year round;
It is not suitable for use on materials that ooze grease, plasticizers or solvents, such as the surface of oil-impregnated wood;
Not suitable for bonding polypropylene, polyethylene, and polytetrafluoroethylene;
When the surface temperature of the material is lower than 5ºC or higher than 40ºC, it is not suitable for construction;
When using lighter color sealant, avoid contact with acidic or alkaline substances (such as exterior wall cleaning fluid) to avoid discoloration.
When bonding cement and concrete substrates, the substrate must be completely dried and cured for 7 days before construction, otherwise the bonding performance will be affected.
Safety Instructions
This product is non-toxic after fully cured, but it should avoid contact with eyes before curing. If contact with eyes, please rinse with plenty of water and seek medical treatment; uncured products should avoid contact with children.
Technical Services
Provide complete product technical information.
Adhesion test and compatibility test.
The company's laboratory can provide customers with pollution tests. Customers can mail (or in other forms) the base materials selected in the project to us. The company's laboratory will conduct pollution tests and issue a written test report.
