Audited Supplier
Middle East 15TPD Marine Ship Seawater Desalination System WY-FSHB-15-2 adopts the international advanced reverse osmosis technology and is designed by optimizing the system.
The system can effectively remove inorganic salts, heavy metal ions, organic bacteria, bacteria and other harmful components in seawater, and desalinate seawater into high-quality water in accordance with the pure water(TDS<10mg/L).
| Product Parameters | |
| Water yield | 625 litres per hour |
| RO product water quality | First stage RO: TDS<500mg/L Second stage RO: TDS<10mg/L |
| Desalination rate | >98.5% |
| Recovery rate | First stage RO: 30% Second stage RO: 70% (Depending on temperature and inlet water quality) |
| Operation pressure | First stage RO: 3.5~5.5Mpa Second stage RO: 0.5~1.5Mpa |
| Power | 9.75KW |
| Voltage | AC440V / 60Hz / Three phase |
| Protection grade | IP54 |
| Material composition | SUS316 Stainless steel |
* 1. The amount of water produced refers to the amount of water produced under the conditions of an inlet water temperature of 25 ºC, a salt content of 35,000 mg/L, and an operating pressure of 5 MPa.
2. Equipment can be customized according to customer requirements.
System function
1. High-pressure unloading, when the high-pressure pump outlet pressure exceeds 6.2MPa, the equipment automatically stops and protects and emits an audible and visual alarm.
2. Low-pressure shutdown protection. When the pre-treatment water supply is insufficient and the high-pressure pump inlet pressure is lower than 0.05MPa, the protection action will be automatically stopped and an audible and visual alarm will be issued.
3. The pre-treatment is equipped with a manual multi-way valve for large-flow backwashing and full washing.
4. Configure the reverse osmosis membrane cleaning system to physically clean, chemically clean and refill the reverse osmosis membrane module.
Process flow diagram
1. Feed pump: Equipped with a stainless steel pump, to provide sufficient pressure for subsequent filtration.
2. Multimedia filter: Mainly to remove turbidity, which is used to filter out large particles and suspended solids in raw water.
3. Precision filter: Further filtration, protection of reverse osmosis membrane.
4. High pressure pump: Provide enough pressure for reverse osmosis system.
5. Reverse osmosis system: The core part of pure water equipment, the production of high-purify water.
Main accessories
2. Membrane Housing: 1000PSI, 1 Core, FRP, 4pcs, 300PSI, 1 Core, FRP, 2pcs
3. Multimedia Filter: Ø500x1650mm, FRP, 1pcs
4. Precision Filter: 20" x 5μm, UPVC
5. High Pressure Pump: SUS316L, Imported brand
6. Feed Pump: SUS316
7. Rinse Tank: 40L, PE
8.Middle Tank: 200L, PE
9. Conductivity Meter: Domestic brand
10. Electric Element: International famous brand
11. Touch Screen
Reverse Osmosis Technology
The reverse osmosis membrane is an artificial semipermeable membrane made of a semi-permeable membrane that has certain characteristics and is a core component of reverse osmosis technology.
The principle of reverse osmosis technology is to remove these substances and moisture according to the osmotic pressure of the solution, according to the fact that other substances cannot pass through the semipermeable membrane. The membrane pore size of the reverse osmosis membrane is very small, so that dissolved salts, colloids, microorganisms, organic matter, and the like in the water can be effectively removed.
The system has the advantages of good water quality, low energy consumption, no pollution, simple process and easy operation.
Packaging: International standard export package; And we can pack according to customers' requirement.
Delivery Time: 25 Working Days.
Our Services
1. After qualified of the equipment, we will supply two year guarantee, control system two year guarantee, free charge for wearing parts, and other spare parts with cost price.
2. If the technicians of the buyer couldn't solve the problems themselves, the after-sales department will supply long range guide service by phone.
3. If relevant measurements couldn't solve the problems, we will send the technicians to the buyer factory, clear the fault or relevant technical problems on site, the charges will reference to the installation and debugging charges.
4. After guaranteed, the seller will supply widely favorable technical support, after-sales service for the lifetime: favorable price for the wearing parts and other spare parts.
FAQ
1)Q: Are you a factory or trading company?
A: Yes, we are a manufacturer with designing, manufacturing, marketing and exporting.
We have sophisticated experience and professional knowledge & technology.
Both OEM and ODM orders are available.
We have more than 15 years of experiences and technology in reverse osmosis equipment, and there are many cases of ship use overseas, especially in the Middle East. In terms of after-sales service, we have a two-years whole system warranty. If there is a problem with the machine, we have a professional after-sales team to solve the problem online at any time and any where.
2)Q: Where is your factory located? How can I visit there?
A: Our factory is located in No.8, Keji Road 1, Tangjiawan, Xiangzhou district, Zhuhai City, Guangdong, China.
All our clients, from home or abroad, are warmly welcome to visit us!
We are expecting to establish long-term business relations with you.
3)Q: What kinds of water treatment equipment do your company offer?
A: We are specialized in designing and manufacturing the products as follow:
Seawater desalination system
Brackish water desalination system
Pure water treatment system
Ultra filtration system
EDI
Reclaimed - water recycling system
Ion- exchange system
Water softening system
