Audited Supplier
GME/RC series
Free Commissioning and Training on Site
One Year or 2000 Working Hours
CE, RoHS, ISO 9001:2000, ISO 9001:2008
New
AC Motor
32-102mm
<100m
Button Bit
Rotation+Feeding+Percussion
RC1200-RC2200
14kw-21kw
100Hz-55Hz
120-220bar
R25 R 32 T38 T45 etc
GRANDPLAN
Ply Wooden Case
RC1200/RC2200
China
Product Description
Hydraulic high quality rock drill for JUMBO
GME Series Hydraulic Drifter Introduction
Adopt the international mainstream rock drill/drifter design scheme, with a number of national patented technology, reliability, high energy efficiency, long maintenance interval cycle, good maintenance, long service life.
The unique modular design of this series of rock drill/drifter makes each module independently sealed, and equipped with a strengthened lead, which can effectively prevent the pollution of external mud water into the system, especially in the corrosive environment, to ensure the reliability and service life of the system, while in the daily maintenance and repair, disassembly and assembly operation is simple, and cylinder can be replaced separately. It greatly reduces the high maintenance cost caused by replacing the percussion shell body.
★ GME-1200 Hydraulic Drifter: Small Body, Big Power!
GME-1200 is a rock drill with smaller length of the same power in the domestic market at present, with a length of only 572mm, which can meet the needs of small section bolt support.
Percussion power is 14KW, drilling speed is fast.
Spare part service life is long and lower lost.
Enough stock of each spares to shorten the maintenance&repair time.
★ GME-2200 Hydraulic Drifter: Affordable&Reliable!
GME-2200 has large percussion power, convenient disassembly and maintenance, low maintenance cost, enhanced lead to prevent external muddy
water pollution into the system, high system reliability, can greatly reduce the vehicle costs.
Percussion power is 14KW, drilling speed is fast.
Spare part service life is long and lower lost.
GME Series Hydraulic Drifter Introduction
Adopt the international mainstream rock drill/drifter design scheme, with a number of national patented technology, reliability, high energy efficiency, long maintenance interval cycle, good maintenance, long service life.
The unique modular design of this series of rock drill/drifter makes each module independently sealed, and equipped with a strengthened lead, which can effectively prevent the pollution of external mud water into the system, especially in the corrosive environment, to ensure the reliability and service life of the system, while in the daily maintenance and repair, disassembly and assembly operation is simple, and cylinder can be replaced separately. It greatly reduces the high maintenance cost caused by replacing the percussion shell body.
★ GME-1200 Hydraulic Drifter: Small Body, Big Power!
GME-1200 is a rock drill with smaller length of the same power in the domestic market at present, with a length of only 572mm, which can meet the needs of small section bolt support.
Percussion power is 14KW, drilling speed is fast.
Spare part service life is long and lower lost.
Enough stock of each spares to shorten the maintenance&repair time.
| General Specification | |
| Impact power | 14kW |
| Impact rate | 100Hz |
| Impact flow | 100L/Min |
| Working pressure | |
| Impact | 120-180bar |
| Rotation | 210bar(max) |
| Rotating motor | OMS 100/125/160 |
| Shank | T38/R32/R25 |
| Hole diameter | 33mm-76mm |
| Detailed Specification | |||
| Size | Weight | 126kg | |
| Length(shank not included) | 572mm | Flushing | |
| Width | 326mm | Water pressure | <20bar |
| Apothem(Height) | 90mm | Water consumption | 40-80L/min |
| Apothem(Horizontal) | 173mm | Shank lubricating | |
| Rotation | Air pressure | 3~4bar | |
| Motor 1 | OMS100 | Air consumption | 260L/min |
| Torque(210bar) | 390N.m | Oil model | Turbine 100 |
| Rotation speed(70bar) | 430rpm | Oil consumption | 0.5ml/min |
| Flow | 60L/min | 25 drops/min | |
| Motor 2 | OMS125 | Accumulator | |
| Torque(210bar) | 490N.m | Medium | Nitrogen(N2) |
| Rotation speed(70bar) | 330rpm | High pressure | 40bar |
| Flow | 60L/min | Low pressure | 4bar |
| Motor 3 | OMS160 | ||
| Torque(210bar) | 610N.m | ||
| Rotation speed(70bar) | 270rpm | ||
| Flow | 60L/min | ||
★ GME-2200 Hydraulic Drifter: Affordable&Reliable!
GME-2200 has large percussion power, convenient disassembly and maintenance, low maintenance cost, enhanced lead to prevent external muddy
water pollution into the system, high system reliability, can greatly reduce the vehicle costs.
Percussion power is 14KW, drilling speed is fast.
Spare part service life is long and lower lost.
| General Specification | ||
| Impact power | 21kW | |
| Impact rate | 55Hz | |
| Impact flow | 120L/Min | |
| Working pressure | ||
| Impact | 120-220bar | |
| Rotation | 210bar(max) | |
| Rotating motor | OMS 125/160/200 | |
| Shank | T38/T45/R38 | |
| Hole diamter | 43mm-102mm | |
| Detailed Specification | |||
| Dimensions | Weight | 215kg | |
| Length(shank not included) | 931mm | Flushing | |
| Width | 333mm | Water pressure | <20bar |
| Apothem(Height) | 90mm | Water consumption | 40-80L/min |
| Apothem(Horizontal) | 178mm | Shank lubricating | |
| Rotation | Air pressure | 3bar | |
| Motor 1 | OMS125 | Air consumption | 300L/min |
| Torque(210bar) | 570N.m | Oil model | Turbine 100 |
| Rotation speed(70bar) | 290rpm | Oil consumption | 0.5 ml/min |
| Flow | 60L/min | 25 drops/min | |
| Motor 2 | OMS160 | Accumulator | |
| Torque(210bar) | 720N.m | Medium | Nitrogen(N2) |
| Rotation speed(70bar) | 285rpm | High pressure | 50bar |
| Flow | 75L/min | Low pressure | 4bar |
| Motor 3 | OMS200 | ||
| Torque(210bar) | 870N.m | ||
| Rotation speed(70bar) | 235rpm | ||
| Flow | 75L/min | ||
