Audited Supplier
Mobile Hospital/Laboratory/Clinic/Healthcare Medical/Hazardous Waste/Garbage/Refuse Microwave Sterilization/Disposal Treatment Equipment with Shredder System
2.The equipment meets the requirements of HJ 229-2021<Technical Specification for Microwave Disinfection of Medical Waste>, and the microwave disinfection technology of medical waste is suitable for the treatment of infectious waste, injury waste, and pathological waste in the <Classification Catalogue of Medical waste>.
3.This technology is not suitable for the treatment of pharmaceutical waste and chemical waste in the<Catalogue of Medical Waste Classification>.
4.The device is designed as an automatic operating system operated by a single person.
5.Each part of the equipment is enclosed in a box made of sandwich flame retardant panels, which is designed to provide protection for the operator and enable the equipment to be used under a simple canopy for emergency use in an outdoor environment.
1.This equipment can handle medical waste such as medical infection, injury and pathology, and carry out harmless disposal of medical waste.
2.Equipment integrated design, a full set of equipment low energy consumption, automatic operation, simple operation, anytime and anywhere treatment of medical waste, fixed, mobile can be customized according to demand, convenient and flexible.
3.Microwave disinfection treatment system is an integrated equipment, the equipment at least by automatic feeding unit, airtight bin unit, multi-function airtight crushing unit, negative pressure pumping unit, microwave disinfection sterilization bin unit, microwave generator unit, steam heating system, discharging unit, automatic control unit, waste gas treatment unit 10 units and alarm system.
| 1.The high temperature steam treatment pot and its supporting devices are uniformly fixed on the same frame to realize the system mobility. and can quickly reach the epidemic area/hospital/mobile cabin isolation point site for direct disposal on the spot. |
| 2.With assembling retractable lifting mechanism, it is more convenient and practical. |
| 3.In addition to direct use of mains electricity, it can also use diesel generators added to the vehicle,only with water and diesel fuel can meet the working requirements |
| 4.The carriage adopts wing opening or half wing opening mode,with lighting facilities on top to form a working channel and realize all-weather field operation. |
| 5.Fixed equipped with steam supply system,Can directly provide steam,and no need for external steam source, more adaptable to various of operating environment. |
| 6.Equipped with (hydraulic, hand)landing legs,Close the landing legs while moves,Open the landing legs while works,ensures the stability and safety of the equipment. |
| 7.The equipment has a high degree of automation, and only one person is needed to operate the whole set of equipment to avoid cross infection. |
| 8.High degree of integration, stop can start the operation, low energy consumption, safe and stable. |
| 9.Microwave has strong penetration ability and thorough sterilization, which can block the spread of bacteria and prevent the spread of epidemic. |
Comparison of commonly used techniques
The process of microwave disinfection of medical waste:
1.The medical waste in the medical waste turnaround box is transported to the Medical Waste Disposal Centre by the medical waste transfer truck and unloaded into the standard garbage bin in the medical waste feeding area;
2.The automatic feeding module automatically sends the medical waste in the standard garbage can to the closed bin;
3.The automatic feeding module and the closed cover plate of the closed bin gang control, and the medical waste automatically enters the multifunctional closed crushing module through the closed bin.
4.The multifunctional crushing module is pumped with the negative pressure inside the closed bin to prevent the spillover of harmful substances.
5.Multifunctional crushing module breaks and reduces the internal medical waste into small pieces of medical waste (about 5cm in size);Small pieces of medical waste automatically enter the spiral microwave sterilization chamber;
6.with homogenizing module in the Spiral microwave sterilization warehouse,the small piece of medical waste mixed thoroughly in the spiral microwave disinfection and sterilization chamber;
7.equipped with microwave disinfection treatment unit in the spiral microwave disinfection and sterilization warehouse ,that can generate electromagnetic wave of corresponding frequency wavelength;
8.the steam heating system is set next to the microwave sterilization chamber, and the high-temperature pressure steam is sent to the microwave sterilization chamber through the steam pipe;with the interaction of high temperature pressure steam and electromagnetic wave of corresponding frequency wavelength, complete the disinfection and sterilization of medical waste .
9.The temperature in the spiral microwave disinfection and sterilization warehouse is more than 95ºC, and the disinfection time of medical waste is more than 45 minutes.
10.The medical waste in the spiral microwave disinfection and sterilization warehouse adopt the way of screw conveyor propulsion, so that the medical waste can be rotated and stirred while advancing, so that the medical waste can be heated and sterilized evenly, can achieve the optimal sterilization effect.After sterilization, the medical waste residue is discharged by automatic discharge spirasystem.
Function: The medical waste was loaded into the temporary storage hopper by means of a dustbin and a hydraulic lifting device. The medical waste is squeezed by the feeding arm to feed the crushing system.
Function: The crusher is used to break the medical waste in the storage hopper, that is, to destroy the shape.
Function: The medical waste after crushing is disinfected in continuous operation (heating is carried out by the dual effect of steam injection and microwave radiation). It meets the requirements of HJ 229-2021 "Technical Specification for Microwave disinfection of Medical Waste".
Function: The temperature is maintained and the sterilized material is transported to the designated residue carrier.
1.Energy Saving:Microwave heating is uniform,no energy loss,high energy,strong penetration of the object,instantaneous penetration into the object,good energy saving effect,take the daily processing capacity of 5T/D model as an example,installed power is 117kw.
2.Low operating temperature and slow heat loss:if microwave and the ordinary heating have the same amount of sterilization effect,the temperature on the object is obviously lower than that of ordinary heating.Waste after microwave sterilization,no residue,light damage.
3.Non-selective effect on organisms:microwave has the same effect on organisms without selectivity,and its wide spectrum of bacteria can kill all kinds of microorganisms and pathogens.
4.Microwave sterilization requires a small working environment and occupation area,the surrounding environment does not constitute high temperature,clean and hygienic.
1.Microwave disinfection technology uses microwave disinfection time short,fast speed,strong penetration,uniform temperature inside and outside,energy saving,good disinfection effect,
2.In the microwave field,the cell structure is destroyed,and the balance of internal and external substances is destroyed,resulting in cell death.
3.The combination of microwave and water vapor makes the disinfection effect more effective.
4.Microwave disinfection technology does not produce dioxins and odorous gases,no wastewater discharge.
| Small medical waste microwave disinfection equipment | Mobile microwave medical waste treatment equipment | Hospital Medical waste treatment equipment |
| https://chinashredderfactory.en.made-in-china.com/product-list-1.html | ||
| Double shaft shredder | Medical waste shredder | Single shaft shredder |
Customer visit
About us:
ZHITE Environmental Protection Technology Co., Ltd.is a comprehensive domestic enterprise with integrating scientific research and development,engineering design,production and installation and commissioning services.The main products are medical waste treatment equipment,diseased livestock and poultry harmless treatment equipment,household waste treatment equipment,kitchen waste treatment equipment,tail vegetable treatment equipment,sludge treatment equipment and all kinds of shredding equipment and other solid waste treatment products. Also can design and customize all kinds of efficient and practical equipment and production lines according to customer needs.
Quality in mind, quantity in hand!High aspiration,long-term quality! We remain true to our original aspiration and forge ahead!Better Quality!--Our pursuit forever!
