Audited Supplier
ZC-9800 is a dual-component plus forming liquid silicon rubber designed for electronics and electrical components. Such as the irrigation and encapsulation of the motor slot, micro transformer, and high -power LED drive power supply, which plays high temperature, heat conduction, insulation, sealing, waterproof, resistance to environmental pollution, eliminating stress, and preventing shocks. The purpose of the device.
Technical Index:
| Serial number | Project | Unit | Technical indicator | Detection standard | ||
| Before solidization | 1 | Exterior | Group A | - | Gray-white fluid | Visual inspection |
| Group B | - | Colorless and transparent | ||||
| 2 | Viscosity | Group A | mPa.s | 500-1500 | GB/T10247-2008 | |
| Group B | mPa.s | 250 | ||||
| 3 | Density | Group A | g/cm3 | 1.5-1.65 | GB/T13354-1992 | |
| Group B | g/cm3 | 0.97 | ||||
| 4 | Hybrid ratio(weight ratio) | - | 10:1 | - | ||
| 5 | Operation time | 25ºC | min | 30-60 | - | |
| 6 | Early solid time | 25ºC | h | 4-8 | - | |
| 7 | Heating and solidification | 100ºC | min | ≤30 | - | |
| After solidization | 8 | Exterior | - | Gray elastic boby | Visual inspection | |
| 9 | Solid density | g/cm3 | 1.4-1.6 | GB/T 533-2008 | ||
| 10 | Show's Harddness | Shore A | 45-60 | GB/T 5311-2008 | ||
| 11 | Volume resistivity | Ω•cm | ≥1*1013 | GB/T 1692-2008 | ||
| 12 | Dielectric strength | KV/mm | ≥15 | GB/T 1695-2005 | ||
| 13 | Flame retardant | - | V-0 | UL 94 | ||
| 14 | Thermal Conductivity | W/m.K | 0.4-0.6 | ASTM D5470 | ||
(1) Before the product is solidified, the liquidity is good, the operation time is moderate, and the operation (the two groups are mixed at 10: 1 ratio) are convenient.
(2)It can be used for a long time at -40 ºC ~ 200 ºC, with a small and high-temperature resistance with a small contraction rate and excellent resistance.
(3)It fully meets the EU ROHS instructions and meets the requirements of green environmental protection.
(4)There are two solidification methods: permanent mild moderate temperature, and deep -seated vulcanization in the inside and outside.
(5)It can maintain the original physical and electrical properties in various working environments, can resist the degradation of ozone and ultraviolet rays, and has good chemical stability.
This product is packed in 5kg and 20kg plastic barrels. Special packaging can be determined according to customer needs.
Anhui ZINCA Silicone Technologies Co., Ltd. is a scientific and technological enterprise specializing in research, development, production and sales of silicone materials. The total investment capital exceeds 220 million CNY. The company was founded in 1994,which was restructured and reorganized from Bengbu Silicone Chemical Plant.The company has two wholly-owned subsidiaries: Bengbu Hengyu Silicon Products Co., Ltd. and Bengbu Hezhong Silicone Fluorine New Materials Co., Ltd.
The company's production base is located in Mohekou Industrial Zone, Bengbu. It covers an area of 77000 square meters. There are more than 120 employees, including 17 senior engineers and technicians. Major research and development, production and sales: silicone products, silazane series, phenyl monomers, sodium condensation special monomers, methyl silicone oil, phenyl silicone oil and so on, covering the various subdivision areas of silicone.
Based on the concept of "win-win cooperation", the company has established strategic cooperation with more than 20 upstream and downstream science and technology enterprises successively. It can provide more than 100 kinds of silicone high and middle-end products with abundant material resources. Some products have high reputation and broad market prospects in developed countries such as Europe and the United States.
