Audited Supplier
3WWDZF6-30D
ISO9001, ISO14001
Low Attitude
Ultra Short Range
Light
Industrial
Unmanned Rotorcraft
Rosefinch
Aviation Case
2080*2080mm
China
Product Description
Mtow 50kg Tethered Drone Powered by Tether Power Station
The maximum load capacity can reach 30KG. It supports the installation and exchange of Megaphone, photoelectric pod, matrix lighting, gas detector and other loads to meet the industrial application needs of emergency rescue, repair and emergency rescue.
Intelligent KX Flight Control
1. Typical characteristics
30 kg load capacityThe maximum load capacity can reach 30KG. It supports the installation and exchange of Megaphone, photoelectric pod, matrix lighting, gas detector and other loads to meet the industrial application needs of emergency rescue, repair and emergency rescue.
Intelligent KX Flight Control
The KX autopilot adopts aviation grade manufacturing technology; Adopting a modular design of core board and expansion board; Equipped with a series of emergency protection measures such as GPS failure autonomous landing, link failure autonomous return, low voltage autonomous return, and intelligent fault diagnosis; Ensure human-machine safety.
Carbon fiber integration
The X6S six rotor drone adopts a high-temperature molded carbon fiber integrated molding process, and the high specific strength and high specific stiffness characteristics of carbon fiber composite materials can greatly ensure the lightweight, miniaturization, and high performance of the drone structure.
Tethered power supply/lithium battery power supply
Support dual modes of tethered power supply and independent lithium battery power supply. In tethered power supply mode, provide continuous drone power supply and support 24-hour hovering in the air; In the independent lithium battery power supply mode, it provides a maximum no-load endurance of 60 minutes.
Carbon fiber integration
The X6S six rotor drone adopts a high-temperature molded carbon fiber integrated molding process, and the high specific strength and high specific stiffness characteristics of carbon fiber composite materials can greatly ensure the lightweight, miniaturization, and high performance of the drone structure.
Tethered power supply/lithium battery power supply
Support dual modes of tethered power supply and independent lithium battery power supply. In tethered power supply mode, provide continuous drone power supply and support 24-hour hovering in the air; In the independent lithium battery power supply mode, it provides a maximum no-load endurance of 60 minutes.
2. H12 series digital image transmission remote control
The H12 series digital image transmission remote control adopts a brand new surging processor, is equipped with an Android embedded system, uses advanced SDR technology and super protocol stack, making image transmission clearer, with lower latency, longer distance, and stronger anti-interference. The H12 series remote control is equipped with a dual axis camera, supporting 1080P digital high-definition image transmission; Thanks to the dual antenna design of the product, the signals complement each other, and combined with advanced frequency hopping algorithms, the communication ability of weak signals is greatly increased.
1080P digital high-definition image transmission
The H12 series remote control is equipped with a dual axis camera to achieve stable transmission of 1080P real-time digital high-definition video.
Ultra long transmission distance
The H12 digital integrated link can transmit up to 10km;
Waterproof and dustproof design
The product has been protected against water and dust at the body, control switches, and various peripheral interfaces.
Industrial level equipment protection
Developed using meteorological silicone, frosted rubber, stainless steel, and aviation aluminum alloy materials to ensure equipment safety.
High definition and high brightness display screen
High performance lithium battery
Equipped with high energy density lithium-ion batteries and 18W fast charging, it can operate for 6 to 20 hours at full charge.
Drone Specifications
The H12 series digital image transmission remote control adopts a brand new surging processor, is equipped with an Android embedded system, uses advanced SDR technology and super protocol stack, making image transmission clearer, with lower latency, longer distance, and stronger anti-interference. The H12 series remote control is equipped with a dual axis camera, supporting 1080P digital high-definition image transmission; Thanks to the dual antenna design of the product, the signals complement each other, and combined with advanced frequency hopping algorithms, the communication ability of weak signals is greatly increased.1080P digital high-definition image transmission
The H12 series remote control is equipped with a dual axis camera to achieve stable transmission of 1080P real-time digital high-definition video.
Ultra long transmission distance
The H12 digital integrated link can transmit up to 10km;
Waterproof and dustproof design
The product has been protected against water and dust at the body, control switches, and various peripheral interfaces.
Industrial level equipment protection
Developed using meteorological silicone, frosted rubber, stainless steel, and aviation aluminum alloy materials to ensure equipment safety.
High definition and high brightness display screen
inch IPS display screen. 2000nits highlighted, 1920 × 1200 resolution, large screen size.
High performance lithium battery
Equipped with high energy density lithium-ion batteries and 18W fast charging, it can operate for 6 to 20 hours at full charge.
Drone Specifications
| Six rotor aircraft | |
| Symmetrical motor wheelbase | 1880mm |
| Overall dimensions | 2000 mm x 2000 mm x 730mm (unfolded) 880 mm x 920 mm x 730mm (folded) L/W/H |
| Propellers specification | diameter * pitch: 36x7 inch |
| Maximum ascent speed | 8 m/s |
| Maximum descent speed | 2 m/s |
| Horizontal flight speed | Positioning mode: 5m/s Motion mode: 8m/s Attitude mode: 20m/s |
| Maximum tilt angle | Positioning mode: 30° Motion mode: 30° Attitude mode: 30° |
| Maximum rotational speed | 120°/s |
| Maximum wind speed resistance | Level 8 |
| Empty weight | 17.8 KG |
| Maximum load | 30KG |
| Standard flight time | ≥55 minutes (empty) |
| Charging time | 40 minutes |
| Working environment temperature | -40ºC to+70ºC |
| Flight altitude | ≥6000 meters |
| Flight humidity | <90% |
| Flight altitude | ≥2000 meters |
| Flight modes | Manual, automatic, fixed altitude, fixed point, motion, attitude |
| Satellite positioning module | GPS/GLONASS or BDSS/GLONASS dual mode GPS Beidou satellite (triple positioning) |
| Hover accuracy | Vertical: ±0.5 m (when GPS positioning is working normally) Horizontal: ±0.5 m (when GPS positioning is working normally) |
| Protection level | IP56 dustproof and waterproof, suitable for flying in moderate rain weather |
| Body material | Carbon fiber material, lightweight, high strength, and corrosion-resistant |
| Control method | APP ground station/remote control |
| Operation time | From transportation state to flight state ≤1 minute (2 people) |
| Task payload | It can provide multiple interfaces and simultaneously mount multiple task payloads |
| Integrated ground station remote control | |
| Screen size | 5.5-inch high-definition highlight (clearly visible in the sun) with touch function |
| Resolution/width | 1920 * 1080 1000nlts |
| Memory | RAM: 4G; ROM: 16G |
| System | Android 5.1 |
| Working frequency | 2.4GHz dual frequency |
| Maximum control distance | 10KM (in open space without interference) |
| Internal battery | 7.4V10000mAh Lipo 2S |
| Video output interface | HDMI video suspension support QGC support wireless RTSP video sharing |
| Other interfaces | SDK and protocol documentation |
| Data retrieval | Reserve TX RX to retrieve flight data |
| Transmission antenna | Dual antenna, long-distance link |
| Remote control type | Integrated digital image transmission |
| One control multiple machines | Supports one control five machines |
| Display type | Supports multi screen display (video window, ground station window displayed simultaneously) |
| Autonomous flight ground station |
| Support for touch screen |
| Support multiple windows opening simultaneously |
| Support for switching between multiple maps AMAP Google China Google Map |
| Can preset waypoints and route tasks, and can edit routes and waypoint tasks in real-time |
| The APP ground station can view real-time aircraft flight status images, videos, voltage, satellite coordinates, altitude, speed, distance, mission and routes |
| 600 waypoint flight missions can be set, including automatic drop off, route flight, one click takeoff, one click landing, autonomous cruise, low pressure return, out of control return, electronic fence, etc. (In unexpected situations such as low voltage, excessive vibration of aircraft attitude, signal loss, punishment of fences, and other unmanned aerial vehicles will return and land autonomously) |
| Support safety protection such as returning on the original route, landing nearby, hovering in place, climbing and returning |
| Battery | |
| Battery type | Professional grade graphene ionomer battery LiHV 14S |
| Voltage | 60V |
| Capacity | 31000mAh*2 |
| Discharge rate | 25C |
| Energy | 3140Wh*2 |
| Adaptation environment | -40 ºC to+70 ºC |
| Applicable altitude | ≥ 4000 meters |
| Original battery weight | 7kg/piece |
| Backup battery weight | 5kg |
| Charger | |
| AC input | 110-240V |
| Charging power | 1500W * 2 |
| Discharge power | 100W (50W x 2) |
| Charging current range | 1.0-25.0A x 2 |
| Discharge current | 5.0A * 2 |
| Balanced current | 1.0-1.5A/knot |
| Rechargeable battery type | Lithium battery (LiPo)/High voltage lithium battery (LiHV) |
| Number of lithium batteries | 14 x 2 |
| Charging mode | Fast charging, precise charging, battery storage |
