Audited Supplier
XY-012I
Video Technical Support, Online Support
1 Yeay
Transfer Print
Multi-Colour
Semi-Automatic
10min
Lithography Printing
Platen Press
Heat Press Machine
Manual
Mug Heat Press Machine
11 Oz
39*33*29cm
Refine
CTN
CE
Anhui, China
84513000
Product Description
Mug Heat Press 11oz Mug Printing Sublimation Heat Transfer Machine
Mug heat press machine can sublimate colorful pictures onto the Sublimation coated mug/bottle/glass mug etc. This machine is widely used into the different mugs like 11oz or 10oz, you can put your favorite picture and photo onto the mugs,own yourself unique handicrafts,it will be your best choice .
Features:
1. Solid steel framework & stainless steel hardwares
2. Fully digital temperature & Time control
3. Automatic Alarm,Temperature & Time recycle
4. Silicone heater, speed & even heater technology
5. Heat & pressure averaged, enable for high demand heat press
| Item No | XY-012I |
| Voltage | 110V/220V |
| Power | 350W |
| Temperature range | 0-220ºC |
| Time control range | 0-999 Sec |
| Temperature error band | +/-5 degrees |
| Mug heater size | 11oz (for 7.5-9cm mug used) |
| Packing size | 39*33*29cm |
| Gross weight | 6.5kg |
Please Note:
1. Be careful of the hot heating surface
2. Please make sure the heating temperature and transfer time are correct
3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.
5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.
COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
rature
Company introduction:
Hefei Gere-tech International Co.Ltd.Is a firm with 10+ years of histroy.We devote ourselves in R&D on signage and Sublimation industries.Our Refine brand cutting plotters and heat press are very popular in North America,Europe, Latin America, Asia and Africa.
We alway provide quality products, reasonable prices as well as best possible after-service!We offer quality guarantee.Our service time is weekly 7days x 15hours/day .
We have superior and steady sales + service staff, which is our biggest advantage among most Chinese competitors!
We promise!We guarantee!
"Gere-tech" is your correct and long-term buiness partner!
Please note : successful print requires right time,temperature and pressure,the thickness of the clothes material,even the type of printing paper,all will affect the performance of printing.Any kind of sublimation paper need test before mass production.
