Audited Supplier
DBT22-8+DTH2000-8+WS630
Horizontal Metal Drawing Machine
Wire, Rope Wire
Copper
0.20-0.68mm
2.05mm
100mm
22
ISO
New
Wire Drawing Machine
Drawing Machine with Annealer
Guanbiao Machinery
Films
CE, SGS
Guangdong Dongguan
8463102000
Product Description
Mulit-Wires Cable Drawing Machine with Annealer
Machine components
Pay off Stand
Drawing Machine DBT22-8
Annealer DTH2000-8
Single Take up WS630
Tension Part YG250
Electrical Control System
Pointing Machine
Steam Generation
Foundation Layout
Production Materials: Copper wires
Max. Wire size: 8*Φ2.05mm.
Finish Wire size(mm):8*Φ0.20~0.68mm
Power Capacity (KVA):About 350KVA
Technical Parameters:
Water for cooling:
POWER SUPPLY
Annealer DTH2000-8
Annealing Wire Size: 8*Φ0.20~0.68mm
Max. Speed: 1800m/min
Dia. of Contact Wheel: 140 mm
Length of Annealer Distant: 1000 mm
Annealing Volts: 55 VDC max
Annealing Current: 2000 DC max
Annealing Power: 200KVA
Dimensions: 2170*1015*2240mm
Weights: About 2600KG
Annealing Cool water: Rate of flow 200 L/Min
Pressure 3.0~4.0 bar
Temperature ≤30 ºC
Protect Air: Steam Pressure 0.4 bar
Rate of flow 8 kg/h
Air pressure for Dry: Pressure 5.0~7.0 ba
Rate of flow: 500 L/Min
Take Up WS630
Technical Parameters:
Note: Designable as per customer requirements.
Power Supply
Air Compressure
Whole Production Line Speed & Product Wire Size:
Machine components
Pay off Stand
Drawing Machine DBT22-8
Annealer DTH2000-8
Single Take up WS630
Tension Part YG250
Electrical Control System
Pointing Machine
Steam Generation
Foundation Layout
Production Materials: Copper wires
Max. Wire size: 8*Φ2.05mm.
Finish Wire size(mm):8*Φ0.20~0.68mm
Power Capacity (KVA):About 350KVA
Technical Parameters:
| Name | Specification |
| Suitable material | Copper wire |
| Inlet diameter() | Max 2.05 |
| Outlet diameter() | 8*Φ0.20~0.68,Φ0.20,match 1.8mm inlet size) 8*Φ0.205~0.68(outlet Φ0.20is with inlet ofΦ1.8mm) |
| Mechanical speed(m/min) | Max 1800 |
| Drawing wheel diameter() | 100 |
| Capstan diameter() | 100 |
| No of dies | Max 22 |
| Elongation | Front 11 Dies 26%/ Back 11 Dies 21% 26%for the first one to the 10th one,21% for the rest dies. |
| Mechanical transmission ratio | Front 11 Axial 1.25,11~14Axial 1.1944,15~18Axial 1.1904,19~22 Axial drive by fix speed wheel 1.25for the first 10 spindles,1.1944 for the 11th to the 14th,1.1904 for the 15th to the 18th,the spindles from 19th to 22st are driven by capstan motor |
| Drawing motor power(kw) | 110 |
| Capstan motor power(kw) | 37 |
| Transmission method | gear transmission |
| Drawing wheel arrangement method | horizontal arrangement |
| Drawing lubricant cooling method | High pressure spray (high pressure hole for both dies and drawing wheels) |
| Flow rate of cooling water for drawing lubricant | 180 L/Min |
| Gear lubricating method | High pressure oil spraying (driven by gear pump with oil cooling device) |
| Flow rate of water for lubricant oil | 22 L/Min |
| Overall size(L x W x H) | 4790*980*1150 (excluding motor) |
| Weight | About 3500KG ( Motor and Motor base included) |
Water for cooling:
| Working pressure | 0.2~0.4 Mpa |
| Temperature | ≤25ºC |
| PH Value | 7~8 |
| Rate of flow | 210L/min |
| Note: cooling water shall not include suspended substance, mineral matters, metal impurity, non-soluble matters and corrosive matters. | |
POWER SUPPLY
| Power supply (3 phases) | ~3×380V(±5%) |
| Power supply single phase | ~220V(±5%) |
| Frequency | 60 Hz (+/-2%) |
Annealer DTH2000-8
Annealing Wire Size: 8*Φ0.20~0.68mm
Max. Speed: 1800m/min
Dia. of Contact Wheel: 140 mm
Length of Annealer Distant: 1000 mm
Annealing Volts: 55 VDC max
Annealing Current: 2000 DC max
Annealing Power: 200KVA
Dimensions: 2170*1015*2240mm
Weights: About 2600KG
Annealing Cool water: Rate of flow 200 L/Min
Pressure 3.0~4.0 bar
Temperature ≤30 ºC
Protect Air: Steam Pressure 0.4 bar
Rate of flow 8 kg/h
Air pressure for Dry: Pressure 5.0~7.0 ba
Rate of flow: 500 L/Min
Take Up WS630
Technical Parameters:
| Model | WS630 |
| working range() | 8*Φ0.20~0.68mm |
| Mechanical Speed (m/min) | Max1800 |
| Winding motor power(kw) | 15 |
| Traverse motor power(w) | 550 |
| positioning motor power(w) | 15 |
| Out Diameter of bobbin() | 630 |
| Barrel diameter() | 280 |
| shaft hole diameter() | 125 |
| Width of the bobbin(mm)(Max.)() | MAX 475 |
| Capacity(Max.)(kg) | MAX 500 |
| Break method | pneumatic to hydraulic |
| Overall size L×W×H() | 1720×820×2030 |
| Net weight(kg) | 1900 |
Power Supply
| Power supply 3 phases (V) | 3 X 380 (-5%~ +10%) |
| Power supply single phase (V) | 220 (-5~+10%) |
| Frequency (Hz) | 60 Hz (+/-2%) |
| Working pressure | 0.6~0.7 Mpa |
| Undulation Value | ±0.02 |
| Due point | -25ºC |
| Air flow | 50L/min |
| Note: The compressed air should be clear and not polluted. | |
Whole Production Line Speed & Product Wire Size:
| TR Soft Wire | |||
| Dia.(mm) | Line Speed (m/min) | Elongation% | Capacity/Hour(KG/H) |
| 0.20 | 1300 | 15-20 | 174.48 |
| 0.4 | 700 | 20-25 | 375 |
| 0.5 | 600 | 20-25 | 492 |
| 0.68 | 480 | 20-25 | 732 |
