Audited Supplier
RH
Customized
Temperature Resistant, Corrosion Resistant
Sunsee
CE, ISO
Multiple Effect
Food Processing Industry, Light Industry, Pharmace
Design as Required
Engineers Available to Service Machinery Oversea
25%-32%
70%-82%
Automatic/Semi-Automatic
0.4-0.8t of Steam/T of 75%Syrup
0.4-1.0MPa
SUNSSE
Sea Freight Packing as Required
Stainless Steel
China
Product Description
SUNSSE Multiple Effect Industrial Falling Film Evaporator
Product Description
Fall film evaporation is the material liquid from the fall film evaporator heating room on the tube box to join, through the liquid distribution and film device, evenly distributed to the heat transfer tube, under the action of gravity and vacuum induction and airflow, into a uniform film flow from top to bottom. During the flowing process, the heating medium is heated and vaporized by the shell process, and the resulting steam and liquid phase enter the separation chamber of the evaporator together.After sufficient separation of vapor and liquid, the secondary steam enters the next evaporator as a heating medium, thus realizing multi-effect operation, and the liquid phase is discharged from the separation chamber.
SUNSSE Falling Film Evaporator Advantages
SUNSSE series of multi-effect falling film evaporator is designed according to customer requirement, with high evaporation and concentration ratio, wide range of material viscosity, good heat transfer effect, large processing capacity, etc. It can realize continuous, automatic operation. In this case, it can introduce highly heat-sensitive, highly concentrated, highly viscous and corrosive vaporizing materials. Therefore, this equipment is widely used in the starch industry for corn syrup, glucose, maltose. Fruit juices and emulsions for the food industry, and lees filtrates for the alcohol industry. According to different material characteristics and plant conditions, it can be combined into a double - seven-effect evaporation system. In addition, the waste heat from the bundle dryer, disk dryer, and steam injection system can be used as a heat source, which can greatly reduce the consumption of raw steam and achieve energy-saving purposes.
We provide a full set of services from design (process, civil, electrical), manufacturing, installation, commissioning to after-sales service; accurate 3D design, constructing 3D solid model, showing every detail of the project intuitively, accurately ; advanced automatic control system, ensuring the automatic and smooth operation of the entire production line.
Product Description
Fall film evaporation is the material liquid from the fall film evaporator heating room on the tube box to join, through the liquid distribution and film device, evenly distributed to the heat transfer tube, under the action of gravity and vacuum induction and airflow, into a uniform film flow from top to bottom. During the flowing process, the heating medium is heated and vaporized by the shell process, and the resulting steam and liquid phase enter the separation chamber of the evaporator together.After sufficient separation of vapor and liquid, the secondary steam enters the next evaporator as a heating medium, thus realizing multi-effect operation, and the liquid phase is discharged from the separation chamber.
SUNSSE Falling Film Evaporator Advantages
SUNSSE series of multi-effect falling film evaporator is designed according to customer requirement, with high evaporation and concentration ratio, wide range of material viscosity, good heat transfer effect, large processing capacity, etc. It can realize continuous, automatic operation. In this case, it can introduce highly heat-sensitive, highly concentrated, highly viscous and corrosive vaporizing materials. Therefore, this equipment is widely used in the starch industry for corn syrup, glucose, maltose. Fruit juices and emulsions for the food industry, and lees filtrates for the alcohol industry. According to different material characteristics and plant conditions, it can be combined into a double - seven-effect evaporation system. In addition, the waste heat from the bundle dryer, disk dryer, and steam injection system can be used as a heat source, which can greatly reduce the consumption of raw steam and achieve energy-saving purposes.
We provide a full set of services from design (process, civil, electrical), manufacturing, installation, commissioning to after-sales service; accurate 3D design, constructing 3D solid model, showing every detail of the project intuitively, accurately ; advanced automatic control system, ensuring the automatic and smooth operation of the entire production line.
