Audited Supplier
dredger -1
Cutter Suction Dredger
Diesel
Hydrocyclone
CTN
Customized
New
2 Year
One-Year Warranty and Lifetime Technical Service
River . Sea. Lake .Inland Waterway
Cumins . Carter. Weichai
227-2200kw
Shijiazhuang
Rexroth . Parker.
Siemens PLC
16-50m
5.5-11m
800-2400m3
38-450kw
Water Flow Meter . Concentration Meter
2-8mm
Hrxs
500-5000m
5-20m
HRXS
Plastic Packaging
6 inch -32 inch
China
8905100010
Product Description
Multiple Inch Hydraulic Pontoon Electric/Diesel Engine Cutter/Jet Suction Dredger for Sand/Soil Dredging/Mining with Cutter Head Using in River
--- Cutter suction dredger is the standard size cutter suction dredger. It is the one of the most hot size dredger. Cutter suction dredger is widely used inland water way dredging such as: river. lake . reservoir and lagoon so on. Offshore dredging: port construction. channel dredging so on. Whole cutter suction dredger is controled by the hydraulic system. Diesel engine and electricl power are available. High quality sand pump from Shijiazhuang industrial pump factory. PLC and hydraulic brand from foreign plentyful optional: underwater pump. anchor boom. booster station. spud carrier so on .
| 1 | Cutter head | This includes the cutter itself and its drive mechanism. The cutter is designed to cut through various types of sediment, such as sand, silt, or rock. |
| 2 | Anchor boom | Depth Control, The anchor helps maintain a consistent depth of the dredger in the water, which is crucial for the efficient sucking of sediments. It also has functions such as Stabilization, Manual Steering, Emergency Response, and Safety Ensurance. The arrangement, angle, and tension of the anchor ropes are adjusted based on specific hydrological conditions, dredging depths, and the size of the dredger to optimize dredging efficiency and safety. |
| 3 | Output pipe | This includes the discharge pipeline and the valve that controls the flow of the dredged material. The discharge system can be adjusted to control the rate of material discharge and to prevent backflow. |
| 4 | Protal Frame | The gantry of a cutter suction dredger plays a critical role in supporting the dredging operation, including the lifting and lowering of the cutter head, providing stability during excavation, suspending and moving the slurry piping, withstanding the forces generated by the cutter and water flow, and serving as a platform for operators to maintain and handle the equipment. |
| 5 | Operating cabin | This includes the navigation equipment, such as radar and GPS, and the control systems for the cutter and the suction and discharge systems. |
| 6 | Spud | The spud is an important component on the cutter suction dredger, mainly used to fix the position of the hull. During the working process, the dredger needs to maintain a stable position to ensure the accuracy and efficiency of the dredging operation. The spud can provide stable support by inserting it into the river bottom or seabed, so that the dredger will not move during the operation. |
--- Production Processing And Drawing
| Hydraulic cutter head rate to add the solid concentration\mixture through the suction pipe into the discharge pipe by the pressure pump to arrived the destination ( power is from hydraulic electric or both together). All main parts such as sand pump and hydraulic pump power from the Cumins diesel engine\hydraulic pump provide the power for lifting winch swing winch\ anchor boom winch\hydraulic spud carrier and cutter head so on. |
| NO./Item | Discharge distance | Dredging depth | Water flow | Solid capacity | Mani/Auxiliary engine | Suction /discharge pipe diameter |
| 6 inch | 500m | 6m | 800m3 | 160m3 | 292kw | 200mm |
| 8 inch | 1000m | 6m | 800m3 | 160m3 | 230/100kw | 250mm |
| 10 inch | 1000m | 8m | 1500m3 | 300m3 | 456/122kw | 350mm |
| 12 inch | 1000m | 12m | 2000m3 | 400m3 | 557/200kw | 400mm |
| 18 inch | 1500m | 15m | 3500m3 | 700m3 | 1137/260 | 500mm |
| 20 inch | 1500m | 15m | 5000m3 | 1000m3 | 1335/405kw | 600mm |
| 24 inch | 1800m | 18m | 7000m3 | 1400m3 | 1620/700kw | 700mm |
| 28 inch | 2000m | 20m | 9000m3 | 1800m3 | 1950/700kw | 800mm |
--- Other Equipped Device In The Cutter Suction Dredger
| HDPE pipe for discharge material Hydraulic floater for HDPE pipe Rubber hose connectiong Pipe |
| Cutter suction dredger can equipped the mining machinery and sand washing system so on. |
18 INCH CUTTER SUCTION DREDGER SPECIFICATION
OUR SERVICE
OUR ADVANTAGE
| 1. | Deck plate thickness 10mm |
| 2. | Bottom plate thickness 12mm |
| 3. | Side plate thickness 10mm |
| 4. | Front plate thickness 18mm |
| 5. | Back plate thickness 18mm |
| 1. | Deck plate thickness 8mm |
| 2. | Bottom plate thickness 8mm |
| 3. | Side plate thickness 8mm |
| 4. | Front plate thickness 14mm |
| 5. | Back thickness 12mm |
| 1 | Make: | Cumins engine |
| 2 | Continuous power: | 895kw(1217HP) |
| 3 | Speed: | 1800r/min |
| 4 | Fuel consumption: | 200g/kw.h |
| 5 | Lub. Oil Consumption: | 1.0g/kw.h |
| 6 | Average fuel consumption: | 160L/H |
| 7 | Cooling system: | Water cooling |
| 1 | Ladder lifting winch: | 1 set |
| 2 | Swing winch: | 2 sets |
| 3 | Diameter of drum: | 475mm |
| 4 | Working pressure: | 16Mpa |
| 5 | Wire rope speed: | 0-30m/min |
OUR SERVICE
Why Choose Our Cutter Suction Dredger?
- We have years of production experience and have established long-term cooperation with research institutions, navigation bureaus, and ship design units to ensure high-quality products and technical levels.
- We prioritize after-sales service, offering technical support and problem-solving, leaving you worry-free during the usage process.
- We offer customization services, creating the most suitable cutter suction dredger for your specific requirements.
- We have years of production experience and have established long-term cooperation with research institutions, navigation bureaus, and ship design units to ensure high-quality products and technical levels.
- We prioritize after-sales service, offering technical support and problem-solving, leaving you worry-free during the usage process.
- We offer customization services, creating the most suitable cutter suction dredger for your specific requirements.
OUR ADVANTAGE
| 1 | Engine: Cumins\ Carter\ Weichai\ Yuchai so on |
| 2 | We can offer full automatic diesel engine power meantine can offer electric cutter suction dredger with underwater pump. |
| 3 | Shijiazhuang industrial sand pump factory is standard configuration in my dredger (long service working time) |
| 4 | Rexroth Hydraulic system form Gemany ( in addtion : Vickers, Parker so on are available for cutter suction dredger) |
| 5 | Siemens PLC control system for our cutter suction dredger. |
| 6 | Plentyful optional configuration: underwater pump anchor boom\ booster station\ water flow meter\ concentration meter so on. |
Packaging&Shipping
Packaging&Shipping:
We ship in containers or bulk carriers. The sand suction dredger is usually shipped to your country by sea. We will cover the hull with plastic film to prevent corrosion and damage to the hull caused by rain or sea water, and fix the plastic film with special ropes to ensure the integrity of the goods during transportation.
We ship in containers or bulk carriers. The sand suction dredger is usually shipped to your country by sea. We will cover the hull with plastic film to prevent corrosion and damage to the hull caused by rain or sea water, and fix the plastic film with special ropes to ensure the integrity of the goods during transportation.
1. Weifang Hairui Xinsheng Environmental Protection Equipment Manufacturing Co., Ltd., located in Qingzhou city---one of the Nine Ancient Cities in China, is leading company of China mining equipment. We are the professional manufacturer who has been dedicated in R& AMP; D, designing, producing, assembling and testing services.
The company's main products are:
- Cutter suction dredger
- Medical waste microwave disinfection equipment
- River mining dredger
- Land mining machinery
- River cleaning machinery
- Harmless incinerator
- Shredder
- Work boat/tug boat
3. We always insist on the principles of honesty, mutual benefit, co-development and welcome to our factory for investigation and business discussion.
1. Are your products certified?
Yes, we are ISO9001:2008, SGS, and BV certified.
2. Can you customize products based on customer requirements?
Yes, we can customize products based on customer requirements and terrain conditions.
3. What is your after-sales service policy?
We provide installation guidance, operation training, maintenance support, and troubleshooting services.
4. How can I visit your factory?
Please contact us in advance to schedule your visit, and we will assist with the arrangements.
5. Do you have your own factory?
Yes, we are a manufacturer with our own factory, and we welcome visits to our facility.
6. How can I get more information?
Please contact us through our website, email, or phone.
