Audited Supplier
WGTS
Vibrating Separator
Cutomized
>10T
Carbon Steel
Heat Resistant
ISO9001:2008, CE
Energy Saving
1 Year
Multi Color
Customized
New
One-Stop Service
4.71~44.90m2
0-10 Degree
0~25rpm
12~370m3/H
1000-2200m
PK
Export Packing
CE, ISO9001: 2008
China
84741000
Product Description
Headquartered in Xinxiang City, Henan Province, China, domestic well-known screening and conveying equipment city, PK Machinery has enjoyed more than 50 steady years of successful growth, and now it has been widely acknowledged as a trustworthy and professional manufacturer in the field of bulk material handling equipment, including vibrating screen, vibrating feeder, belt conveyor, bucket elevator, screw conveyor, scraper chain conveyor and associated spare parts in complete specifications.
Introduction:
Trommel screen is composed of motor, reduction unit, cylindrical drum, screen frame and sealing cover.Application:
Trommel screen is applied to compost, chemical, coal, construction, gold mine, plastic, recycling, metallurgy, mineral-selecting, agriculture etc.
Working principle:
When material flow towards along the inclined rotating drum,materials jump and roll , the undersized material smaller than the screen apertures passes through the screen wire mesh, while the oversized material passes out at the other end of the drum.
Technical Parameters:
Model | Capacity (t/h) | Power (kW) | Drum Diameter (mm) | Discharge Size (mm) | Input Size (mm) | Dimension (L×W×H) (mm) | Drum Length (mm) |
| GTS1015 | 50 | 3 | 1000 | 0~100 | ≤300 | 2600×1400×1700 | 1500 |
| GTS1020 | 100 | 4 | 1000 | 3390×1400×2140 | 2000 | ||
| GTS1225 | 160 | 5.5 | 1200 | 4146×1600×2680 | 2500 | ||
| GTS1530 | 250 | 7.5 | 1500 | 4460×1900×2820 | 3000 | ||
| GTS1545 | 350 | 11 | 1500 | ≤400 | 5960×1900×3080 | 4500 | |
| GTS1848 | 450 | 15 | 1800 | 6500×2350×4000 | 4800 | ||
| GTS2055 | 600 | 22 | 2000 | 7500×2550×4800 | 5500 | ||
| GTS2265 | 800 | 30 | 2200 | 8500×2750×5000 | 6500 |
Advantages:
1. Smooth operation, low noise, low energy consumption
2. Simple structure, convenient maintenance
3. Trommel screen can be sealed designed, no dust pollution
4. Long service life of mesh screen
Selection condition:
1. Material to be screened _________
2. Bulk density _________t/m3, Maximum feeding size _________mm, Moisture content ________%, Material temperature _________degree
3. Material particle size distribution (%)
4. Capacity _________tons/hour
5. Layer / Deck ________, Mesh size of every layer / deck ________mm
6. Power supply ______V / ________Hz/ 3 phase
Operation and Maintenance
1. Perform the following maintenance daily.
1) Grease the bearings on the drum wheel shafts and thrust wheels. Use multipurpose bearing grease.
2) Check the vent screens in each motor. If the screens are clogged, brushed them off.
2. Perform the following maintenance weekly.
1) Clean the material build-up in the Trommel drum weekly or as needed.
2) Visually check the idler wheel surfaces for cracks or misalignment.
3) Visually check the gearboxes for leaks.
4) Visually check the screen attachment bolts for tightness.
3. Perform the following maintenance every six months.
1) Grease the fittings on each motor. This requires approximately two pumps with a hand held grease gun.
2) Change the gear box oil after the first 250 hours and every six months thereafter. Use 90 wt. gear oil.
3) Grease the cleaning brush bearings on each shaft (if equipped). Use multipurpose bearing grease.
4.Screen Replacement
To change a screen, unbolt the screen from the Trommel drum and lift it off. Install the new screen, and bolt in place.
