Needle Roller & Cage Assemblies Bearing Automobile Zf 0750 115 011 45*53*21, 722 0392 10/010 981 1010, 0750115011, 722039210, 0109811010

1.needle roller and cage assemblies are self­-contained, ready-­to­-mount bearings. In applications where the shaft and housing bore can serve as raceways, the assemblies can be used to create bearing arrangements that require minimal radial space.
 

Features and benefits

• Lowest cross section among rolling bearings
  In applications where less space is available, needle roller and cage assemblies offer a very compact solution.
• High load carrying capacity
  Owing to their large number of rollers, needle roller and cage assemblies have a high load carrying capacity.
• High stiffness
  Because of their large number of small-diameter rollers, needle roller and cage assemblies have high stiffness.

2.drawn cup needle roller bearings have a deep drawn, thin-walled outer ring. Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. These bearings are mounted with a tight interference fit in the housing. That enables a simple and economic design of the housing bore, as shoulders or snap rings are not required to locate the bearing axially.

The drawn cup of hardened steel and the needle roller and cage assembly of these bear­ings form a non­-separable unit.

Features and benefits

• Low cross section
  In applications where less space is available, drawn cup needle roller bearings enable downsizing.
• High load carrying capacity and stiffness
  Owing to their large number of rollers, drawn cup needle roller bearings have a high load carrying capacity and stiffness.
• Good running properties

3.needle roller bearings with machined rings are made of carbon chromium bearing steel. SKF supplies these bearings with or without flanges on the outer ring, in a wide range of series and sizes. SKF also supplies them with or without an inner ring.

Features and benefits

4.alignment needle roller bearings have an outer ring with a sphered (convex) outside surface. Two polymer seating rings with a sphered (concave) inside surface are encased in a drawn sheet steel sleeve and fitted over the outer ring.
 

Features and benefits

• Accommodate static misalignment
  Alignment needle roller bearings are self-aligning up to 3° of static misalignment.
• Low cross section
  In applications where less space is available, alignment needle roller bearings offer a compact solution.
• High carrying capacity
  Owing to their large number of rollers, alignment needle roller bearings have a high load carrying capacity.

5.combined needle roller bearings consist of a radial needle roller bearing combined with a thrust bearing. They can accommodate both radial and axial loads. They are particularly suitable for applications where other types of locating bearing arrangements occupy too much space, or where the axial loads are too heavy, the speeds are too high, or the lubricant is inadequate for arrangements with simple thrust washers. 
 

Features and benefits

 

Needle Roller and Cage Assemblies
Drawn Cup Needle Roller Bearings(Metric and Inch)
Thrust Needle Roller Bearings(Metric and Inch)



SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It's better to start your order with Trade Assurance to get full protection for your samples order.

CUSTOMIZED
The customized LOGO or drawing is acceptable for us.

MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don't disclose any info.