Audited Supplier
DRSS-108
We Can Send Engineer Supervise Installa
Finished Goods Warehouse
Steel Structure
Customized
Wind Load, Snow Load, Earthquake Grade
Welded Column, Beam
Galvanized or Painting as Customer's Request
Insulation Sandwich Panel or Customized
as Per Customer's Request
as Per Customer's Request
More Than 50 Years
Steel Workshop, Steel Structure Platform
Bolt Connection and Welded Connection
Carbon Steel
Q235B, Q345b, Q355b
1 Year
Dryc
Sea Worthy Pacage for Steel Structure
Customized
Qingdao, China
73089000
Product Description
Why You Choose Steel Structure?
1. High strength: The strength of steel is much higher than that of traditional building materials such as bricks and concrete. It can bear greater loads and can be used to construct large-span and high-rise warehouses to meet different warehousing needs.
2. Light self-weight: The weight of the steel structure is relatively light. Generally speaking, for warehouses of the same scale, the steel structure is 30% - 50% lighter than the concrete structure. This reduces the load on the foundation project, lowering the cost of foundation construction, and also makes it easy for transportation and installation.
3. Fast construction speed: Steel structure components can be standardized and produced in the factory and then transported to the construction site for assembly. This prefabricated construction method greatly reduces the amount of on-site construction work and shortens the construction period. Compared with traditional concrete structure warehouses, the construction time can be shortened by 1/3 - 1/2.
4. High space utilization rate: The cross-section of steel structure components is relatively small, which can reduce the space occupied by the structure and provide a larger usable space inside the warehouse. At the same time, the steel structure can achieve a large-span space design without the need for too many intermediate support columns, which is convenient for the flexible stacking of goods and the operation of handling equipment.
5. Good seismic performance: Steel has good toughness and ductility, which can absorb a large amount of energy during an earthquake and reduce the damage of the earthquake to the warehouse. The overall structure of the steel structure warehouse is light and flexible. Compared with traditional brick-concrete structures or concrete structures, it has better anti-collapse ability during an earthquake, effectively protecting the goods and personnel safety in the warehouse. 6. Recyclable: When the service life of the steel structure warehouse expires or it needs to be demolished for other reasons, the steel components can all be recycled and reused, with a recycling rate of 70% - 90%, reducing the generation of construction waste and meeting the requirements of environmental protection and sustainable development.
7. Beautiful appearance: The steel structure can be designed in various ways to meet the requirements of different customers for the appearance of the warehouse. Its lines are simple and smooth, which can be well integrated with the surrounding environment. At the same time, it is also convenient for exterior wall decoration, improving the overall beauty of the warehouse.
1. High strength: The strength of steel is much higher than that of traditional building materials such as bricks and concrete. It can bear greater loads and can be used to construct large-span and high-rise warehouses to meet different warehousing needs.
2. Light self-weight: The weight of the steel structure is relatively light. Generally speaking, for warehouses of the same scale, the steel structure is 30% - 50% lighter than the concrete structure. This reduces the load on the foundation project, lowering the cost of foundation construction, and also makes it easy for transportation and installation.
3. Fast construction speed: Steel structure components can be standardized and produced in the factory and then transported to the construction site for assembly. This prefabricated construction method greatly reduces the amount of on-site construction work and shortens the construction period. Compared with traditional concrete structure warehouses, the construction time can be shortened by 1/3 - 1/2.
4. High space utilization rate: The cross-section of steel structure components is relatively small, which can reduce the space occupied by the structure and provide a larger usable space inside the warehouse. At the same time, the steel structure can achieve a large-span space design without the need for too many intermediate support columns, which is convenient for the flexible stacking of goods and the operation of handling equipment.
5. Good seismic performance: Steel has good toughness and ductility, which can absorb a large amount of energy during an earthquake and reduce the damage of the earthquake to the warehouse. The overall structure of the steel structure warehouse is light and flexible. Compared with traditional brick-concrete structures or concrete structures, it has better anti-collapse ability during an earthquake, effectively protecting the goods and personnel safety in the warehouse. 6. Recyclable: When the service life of the steel structure warehouse expires or it needs to be demolished for other reasons, the steel components can all be recycled and reused, with a recycling rate of 70% - 90%, reducing the generation of construction waste and meeting the requirements of environmental protection and sustainable development.
7. Beautiful appearance: The steel structure can be designed in various ways to meet the requirements of different customers for the appearance of the warehouse. Its lines are simple and smooth, which can be well integrated with the surrounding environment. At the same time, it is also convenient for exterior wall decoration, improving the overall beauty of the warehouse.
Steel structure is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence, multi-layered high building and so on.
Project: Steel Structure Workshop
Feature: Large Span, Portal frame.
Usage: Widely used in many area, Workshop, warehouse, car garage, aircraft hangar, barn, etc.
Main materials and opptions are as the following:
| Load: Dead load 0.25, Live load 0.3, Wind load: 0.35, Snow Load: 0.5 | ||
| NO. | Item | Note |
| A: Main steel frame | ||
| 1 | Column | Welded H column, Q355B, two coats of paint |
| 2 | Beam | Welded H beam, Q355B, two coats of paint |
| 3 | Roof purlin | Z180*80*20*2.5/2.0, Q235B, Galvanized |
| 4 | Wall purlin | C180*70*20*2.0, Q235B, Galvanized |
| 5 | Column bracing | D20, two coats of paint |
| 6 | Roof bracing | D20, two coats of paint |
| 7 | Tie bar | D120 * 2.5, two coats of paint |
| 8 | Verge steel angle | L50*4, Galvanized |
| 9 | Angle bracing | L50*4, Galvanized |
| 10 | Anti-sag bar | φ12, Galvanized |
| 11 | Bracing pipe | φ32*2.5, Galvanized |
| 12 | Anchor bolt | M24 |
| B: Standard parts | ||
| 1 | High strength bolt | M20*75(10.9S) |
| 2 | Common bolt | M12*35, M16*50(4.8S) |
| 3 | Nut | M12, M24, M20 * Galvanized |
| 4 | Turn buckle | M20 |
| C: roof and wall protect system | ||
| 1 | roof panel | 0.5mm/100mm/0.4mm rock wool/ glass wool/ PU sandwich panel |
| 2 | wall panel | 0.5mm/100mm/0.4mm rock wool/ glass wool/ PU sandwich panel |
| 3 | Ridge tile mat | match the type of the roof panel |
| 4 | Self tapping screw | M5.5*135 |
| 5 | Ridge tile external | 0.50mm, PPGI |
| 6 | Ridge tile internal | 0.5mm,blue |
| 7 | Trims and flashing | 0.50mm, PPGI |
| D: Windows and doors | ||
| 1 | Door | Roll-up door, steel door, access door, etc, Customized |
| 2 | Window | PVC or Aluminum frame, Fixed, swing, sliding, louver etc, size customized |
| 3 | Complementary material | |
| E: Other options | ||
| 1 | Crane | The lift weight is 5t/ 10t/ 15t/etc |
| Remark: | ||
| 1. The chemical bolts should be supplied by customer. | ||
Design Capacity
Factory Show
Q: Is your company a factory or a trader?
A: We are an integrated industry and trade company. You are welcomed to visiting our factory. The quality control flow and sales team will show you our professionalism.
Q: Whats the quality assurance you provided and how do you control quality?
A: There is a procedure to check products at all stages of the manufacturing process - raw materials, in process materials, validated or tested materials, finished goods, etc. SGS, BV and other testing are available for us.
Q: Can you offer designing service?
A: Yes, we have more than 20 experienced designers. We could design full solution drawings as per your requirements. By using AutoCAD, PKPM, MTS, 3D3S, Tekla Structures (X steel) etc, we can design complex industrial building like office mansion, super market, plants, shipping mall, 5 stars hotel, etc. One-stop service is our outstanding superiority.
Q: How about the delivery time?
A: The specific production time depends on the quantity of goods. Normally, it is about 10 to 30 days after all the details are confirmed and receiving the deposit. The delivery of Large order should be discussed with the management department in advance and then confirm the timing with you accordingly. Usually, large order will be delivered in batches.
Q: What about the installation instrucions?
A: We will provide you installation videos and detailed installation instructions or online technical guidance. If you need, we can provide the service of installation guidance arrange a team to do the installation on site by extra.
Q: How about the payment?
A: All payment methods are acceptable. We prefer to 30% down payment by T/T, 70% balance before shipment.
If you have the design drawing, we could make the budget according to your design.
If you could advise the following parameters so that we could make the design and quotation accordingly.
| 1. Location (where will be built? ) | _____ country, area |
| 2. Size: | _____ mm(L) * _____mm(W) * _____mm(H) |
| 3. Live load on roof | _____ kn/m2, |
| 4. Wind load (max. Wind speed) | _____ kn/m2, or _____km/h, or_____m/s |
| 5. Snow load (max. Snow height) | _____ kn/m2, or _____mm |
| 6. Anti-earthquake | _____ level |
| 7. usage of the building: | |
| 8. Brickwall needed or not | if yes, 1.2m high or 1.5m high |
| 9. Thermal insulation | if yes, EPS, fiberglass wool, rockwool, PU sandwich panels, Corrugated steel sheet with fiber glass wool will be suggested; If not, the Corrugated steel sheet will be ok. The cost of the latter will be much lower than that of the former. |
| 10. Door quantity & size | _____ units, _____(width)mm*_____(height)mm |
| 11. Window quanity & size | _____ units, _____(width)mm*_____(height)mm |
| 12. Crane needed or not | If yes, _____units, max. Lifting weight____tons; Max. Lifting height _____m |
| 13. Others | Skylight belt, ventilator and any other accessories if needed. |
If you have any enquiry, please feel free to contact me. I have over 20 years of trading experience in many markets, such as America, EU, Mideast, Africa, Southeast Asia, Rusia. I will do my best to help you achieve the optimal solutions for your projects, thank you.
Meeting with customers
