Audited Supplier
Nanoplate
High Temperature Insulating Material
1050c
Al2O3.Sio2
Spray Silk Rug
High Purity Ceramic Fiber
Customizable
ISO9001, CE, etc
320kg/M3
0.8kj/Kg.K
0.3MPa
2.0%
jucos
Sea-Worthy Wooden Case
customizable
China
6806900000
Product Description
Nano microporous Insulation Board with Aluminum Foil is formed by using light weight, inorganic nanoSiO 2 and ceramic fiber with extremely low thermal conductivity as raw materials and aluminum foil with
high reflectivity as bottom material, adopting a single-layer composite structure to be continuously coated
and matched with a pressing and baking process, and has the thermal conductivity smaller than that of
static air, and the thermal insulation performance is about 4 - 6 times better than that of the traditional
thermal insulation material, so the nano heat insulation board is the thermal insulation material with the
best performance so far.
The nano heat insulation board has ultra-low thermal conductivity, can greatly save energy compared
with the traditional heat insulation material, and has a pipe diameter of 150 mm.. Temperature of 600
degrees of pipeline, for example, in the use of thickness is only one third of the thickness of the traditional
mineral wool, per meter of pipeline save 1400 degrees of electricity per year, the total length of 1000
meters of pipeline save energy about 1.4 million degrees of electricity per year.
Features Of Nano Insulation Board
- High temperature resistance - long-term use temperature of 400 ~ 1000 degreesd
- Thermal conductivity - 2 ~ 10 times lower than the conventional thermal insulation material, 800 degrees only 0.052 w / m k
- Durability - can be used as a permanent layer of insulation, service life of more than 5 ~ 10 years
- Safety and environmental protection - pure non-polar material combination, good thermal stability, no release of any harmful substances
- Economic analysis - the price is lower than 50 % of similar products abroad, 10 ~ 30 % energy saving than conventional materials
Applications Of Nano Insulation Board
- Nonferrous Metal Furnace
- Rotary & Shaft Kiln
- Various Incinerator
- Reheating Furnace
- Permanent Lining For EAF Ladle
- General Industrial Furnace etc.
| Brand Property | TP950 | TP1000 | TP1100 | |
| Melting Point (ºC) | ≥1200 | ≥1200 | ≥1200 | |
| Operating Temperature (ºC) | 950 | 1000 | 1100 | |
| Density (kg/m³) | 280-350 | 550-650 | 550-650 | |
| Compressive strength (MPa) | 0.5 | 0.8-1.2 | 0.8-1.2 | |
| Heating wire shrink 800ºC (%) | ≤1.9 | ≤1.9 | ≤1.9 | |
| Thermal Conductivity (w/m.k) | 200ºC | 0.016 | / | / |
| 400ºC | 0.021 | 0.043 | 0.047 | |
| 600ºC | 0.026 | 0.057 | 0.058 | |
| 800ºC | 0.035 | 0.063 | 0.069 | |
Q1 : How can you control your quality?
A1 : For each production processing, JUCOS have complete QC system for the chemicalcomposition and Physical properties. After production, all the goods will be tested, and
the quality certificate will be shipped along with goods.
Q2: Are you a manufacture or trader?
A2: We are truly a manufacturer, we not only can provide the high quality products with the
best price, but also can offer the best pre-sale service and after-service.
Q3 : Do you provide free samples?
A3 : Of course, free samples are available.
Q4 : What is your lead time?
A4 : It usually needs about 15- 20 days after receiving the PO.
Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit JUCOS company and our products.
Also, we can talk more about the technique details if you need.
Q6 : What is the warranty of your products?
A6 : Our products have at least 1 year warranty,if any quality problems,
we will take responsibility of the cost of the shipment and the replacement.
Q7: What's the MOQ of trial order?
A7 : No limit, we can offer the best suggestions and solutions according to your condition.
Q8: Why choose us?
A8: We had been in this line for more than 25 years, we can not only provide you high
quality products with competitive price, but also we can supply good technique service
which can help you solve problems.
Q9 : What standards do you have?
A9 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
