Audited Supplier
ZS0101H-1
High Operating Safety Belts
Polyester
Nylon
CE
≤5
Four-point
≥23kN
Yellow
0.4-226
1t-100t
4-610 mm
40-1060mm
gostern
Strip, Drum. Bag
1T -100T
Jiangsu, China
60063100
Product Description
Products Description
Ce Certified New Style Polyester Child and Adult Safety Harness
To know us
Gostern Rigging Co., Ltd.Is established in the year of 2001 in China.The company covers an area of 33000 square meters, more than 600 employees.It is a specialized slings company which can design, manufacture and market.
Our main products are steel wire ropes, wire rope slings, synthetic fiber belt slings, nylon braided ropes, chain slings, steel plate lifting clamps, metallurgy clamps, hanging beams, rigging accessories and so on.The products are widely used in machinery, metallurgy, petroleum, chemical industrial, ports, shipbuilding and other fields.The perfect performance has been highly appraised by Users.
Specifications of our products
| roduct Name | safety harness double lanyard |
| Material | 45mm high strength polyester webbing |
| Detailed Configuration | Double rope double hook, cushion bag safety belt |
| Parameter | Breaking tension ≥ 22KN |
| Adjust | 4 - point adjustment (chest strap, leg strap, waist belt, back) |
| Scope Of Application | Working at heights, construction protection, electricity, rescue, climbing |
| Safety Belt Standard | GB6095 - 2021 "Fall Protection Safety Belt" European Standard |
How to put on the safety belt:
1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks.Pull one and the other thigh strap through the crotch and latch each strap.Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder.Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm en362, always connected to both eyes and locked.It is always recommended its use, even if you are using the dorsal tightening ring.
Harness is put on correctly if:
* all straps are correctly adjusted (neither too loose nor too tight).
* back attaching buckle is correctly positioned at the level of the shoulder blades.
* front chest strap is correctly positioned at the middle of the chest.
* the ends of all the straps must be kept by plastic loops.
What we achieved
we have achieved many awards both domestic and worldwide.Pls see our achievements as bellow :
Our Difference
SATISFACTORY SERVICE
- Leatime 8-15 days
- 3 years warranty
- Varied packaging choice
-we welcome you to have a factory Tour
Experience
- Long history in the sling area for almost 20 years
-sales volume increase to over 40 million per year
- Leatime 8-15 days
- 3 years warranty
- Varied packaging choice
-we welcome you to have a factory Tour
Experience
- Long history in the sling area for almost 20 years
-sales volume increase to over 40 million per year
plant view
Packing
To contact us
Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.
FAQ
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 2-5 days, mass production time needs 1-3 weeks for order quantity more than one container
Q3. Do you have any MOQ limit ?
A: Low MOQ, 1PC for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: Train and sea shipping both can provide. Shipping time depends on distance.
Q5. How to proceed an order ?
A: Firstly let us know your requirements or application.
Secondly We offer you the ideal products and price .
Thirdly we strike the deal if everything goes well.
Fourthly We arrange the production.
Q6. Is it OK to print my logo and change package?
A: Yes. Please inform us formally before our production.we need comfirm with you the design.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.1%. We will do several inspection before we send to you.
