Audited Supplier
K
Duct Type
Thermocouple
Contact
Analog Type
Integration
Ptrh10-PT
Temperature
IP65
ISO
Customized
-270~1372
S/R/A/C/D/K/N/E/J/T
Liqun
Wooden Case
0.5mm-0.2mm
China
Product Description
Manufacturer Thermocouple Bare Alloy Wire (Type K/N/E/J/T)
Type K is the most commonly used thermocouple for measuring high temperatures, providing the widest operating temperature range from - 200 ° to + 1260 °C.Type K has a better resistance to oxidation than other types of thermocouple (except type N) and is particularly recommended for oxidizing or inert atmospheres.It should not be used without protection in sulphurous atmospheres, in reducing atmospheres or a long time in a vacuum.Must be protected from sulfurous and marginally oxidizing atmospheres. Reliable and accurate at high temperatures.
Type N thermocouple has been developed which provides much longer life, longer exposure to high temperature and better reliability of EMF drift and short term EMF changes.
Type E thermocouple has the highest EMF output per degree of all the referenced thermocouples.
Type J Thermocouple is frequently used for its low cost and high EMF It can be used in oxidizing conditions up to 760°C. For higher temperatures, it is recommended to use large wire diameters.Type J thermocouple is suitable for oxidizing, reducing inert atmosphere or vacuum.
Type T thermocouple is suitable for oxidizing, reducing inert atmosphere or vacuum.
Type N thermocouple has been developed which provides much longer life, longer exposure to high temperature and better reliability of EMF drift and short term EMF changes.
Type E thermocouple has the highest EMF output per degree of all the referenced thermocouples.
Type J Thermocouple is frequently used for its low cost and high EMF It can be used in oxidizing conditions up to 760°C. For higher temperatures, it is recommended to use large wire diameters.Type J thermocouple is suitable for oxidizing, reducing inert atmosphere or vacuum.
Type T thermocouple is suitable for oxidizing, reducing inert atmosphere or vacuum.
1.Chemical composition and mechanical properties
| Product | Chemical Composition/% | Density (g/cm3) | Melting point (ºC) | Resistivity (μΩ.cm) | Tensile Strength (Mpa) | |||||||
| Ni | Cr | Si | Al | Mg | Fe | Cu | ||||||
| KP(+) Nickel Chrome | 90 | 10 | - | - | - | - | - | 8.7 | 1427 | 70 | ≥490 | |
| KN(-) Nickel Silicon | 97 | - | 3 | - | - | - | - | 8.6 | 1399 | 29 | ≥390 | |
| KN(-) Nickel Aluminum | 96 | - | 1 | 3 | - | - | - | 8.6 | 1399 | 29 | ≥390 | |
| NP(+) Nickel Chrome Silicon | Blance | 13.7-14.7 | 1.2-1.6 | - | <0.01 | - | - | 8.7 | 1427 | 70 | ≥490 | |
| NN(-) Nickel Silicon Magnesium | Blance | <0.02 | 4.2-4.6 | - | 0.5-1.5 | - | - | 8.6 | 1399 | 29 | ≥390 | |
| EP(+) Nickel Chrome | 90 | 10 | - | - | - | - | - | 8.5 | 1427 | 70.6 | ≥490 | |
| EN(-) Copper Nickel | 45 | - | - | - | - | - | 55 | 8.8 | 1220 | 49 | ≥390 | |
| JP(+) Pure Iron | - | - | - | - | - | 100 | - | 7.8 | 1402 | 12 | ≥240 | |
| JN(-) Copper Nickel | 45 | - | - | - | - | - | 55 | 8.8 | 1220 | 49 | ≥390 | |
| TP(+) Copper Wire | - | - | - | - | - | - | 100 | 8.9 | 1084 | 1.71 | ≥196 | |
| TN(-) Copper Nickel | 45 | - | - | - | - | - | 55 | 8.8 | 1220 | 49 | ≥390 | |
2.Maximum operating temperatures
| Product | Alloy wire Dia/mm | The long-term operating temperatures/°C | The short-term operating temperatures/°C |
| KP/KN | 0.3 | 700 | 800 |
| 0.5 | 800 | 900 | |
| 0.8,1.0 | 900 | 1000 | |
| 1.2,1.6 | 1000 | 1100 | |
| 2.0,2.5 | 1100 | 1200 | |
| 3.2 | 1200 | 1300 | |
| NP/NN | 0.3 | 700 | 800 |
| 0.5 | 800 | 900 | |
| 0.8,1.0 | 900 | 1000 | |
| 1.2,1.6 | 1000 | 1100 | |
| 2.0,2.5 | 1100 | 1200 | |
| 3.2 | 1200 | 1300 | |
| EP/EN | 0.3,0.5 | 350 | 450 |
| 0.8,1.0,1.2 | 450 | 550 | |
| 1.6,2.0 | 550 | 650 | |
| 2.5 | 650 | 750 | |
| 3.2 | 750 | 900 | |
| JP/JN | 0.3,0.5 | 300 | 400 |
| 0.8,1.0,1.2 | 400 | 500 | |
| 1.6,2.0 | 500 | 600 | |
| 2.5,3.2 | 600 | 750 | |
| TP/TN | 0.2,0.3 | 150 | 200 |
| 0.5,0.8 | 200 | 250 |
3.EMF reference table (μV)
| Product | Operating temperatures/°C | Nominal value of thermoelectric EMF | Level I | |
| Tolerance | Range of EMF | |||
| KP/KN | 100 | 4 096 | ±46 | 4 050-4 142 |
| 200 | 8 138 | ±44 | 8 094-8 182 | |
| 300 | 12 209 | ±50 | 12 159-12 259 | |
| 400 | 16 397 | ±68 | 16 329-16 465 | |
| 500 | 20 644 | ±85 | 20 559-20 729 | |
| 600 | 24 905 | ±102 | 24 803-25 007 | |
| 700 | 29 129 | ±117 | 29 012-29 246 | |
| 800 | 33 275 | ±131 | 33 144-33 406 | |
| 900 | 37 326 | ±144 | 37 182-37 470 | |
| 1000 | 41 276 | ±156 | 41 120-41 432 | |
| 1100 | 45 119 | ±167 | 44 952-45 286 | |
| 1200 | 48 838 | - | - | |
| 1300 | 52 410 | - | - | |
| Product | Operating temperatures/°C | Nominal value of thermoelectric EMF | Level I | |
| Tolerance | Range of EMF | |||
| NP/NN | 100 | 2774 | ±44 | 2730-2818 |
| 200 | 5913 | ±49 | 5864-5962 | |
| 300 | 9341 | ±53 | 9288-9394 | |
| 400 | 12974 | ±59 | 12915-13033 | |
| 500 | 16748 | ±76 | 16672-16824 | |
| 600 | 20613 | ±94 | 20519-20707 | |
| 700 | 24527 | ±110 | 24417-24637 | |
| 800 | 28455 | ±126 | 28329-28581 | |
| 900 | 32371 | ±140 | 32231-32511 | |
| 1000 | 36256 | ±154 | 36102-36410 | |
| 1100 | 40087 | ±167 | 39920-40254 | |
| 1200 | 43846 | - | - | |
| 1300 | 47477 | - | - | |
| Product | Operating temperatures/°C | Nominal value of thermoelectric EMF | Level I | |
| Tolerance | Range of EMF | |||
| EP/EN | 100 | 6 319 | ±68 | 6 251-6 387 |
| 200 | 13 421 | ±74 | 13 347-13 495 | |
| 300 | 21 036 | ±93 | 20 943-21 129 | |
| 400 | 28 946 | ±128 | 28 818-29 074 | |
| 500 | 37 005 | ±162 | 36 843-37 167 | |
| 600 | 45 093 | ±194 | 44 899-45 287 | |
| 700 | 53 112 | ±223 | 52 889-53 335 | |
| 800 | 61 017 | ±251 | 60 766-61 268 | |
| 900 | 66 787 | - | - | |
| Product | Operating temperatures/°C | Nominal value of thermoelectric EMF | Level I | |
| Tolerance | Range of EMF | |||
| JP/JN | 100 | 5 269 | ±82 | 5 187-5 351 |
| 200 | 10 779 | ±83 | 10 696-10 862 | |
| 300 | 16 327 | ±83 | 16 244-16 410 | |
| 400 | 21 848 | ±88 | 21 760-21 936 | |
| 500 | 27 393 | ±112 | 27 281-27 505 | |
| 600 | 33 102 | ±140 | 32 962-33 242 | |
| 700 | 39 132 | ±174 | 38 958-39 306 | |
| 750 | 42 281 | ±192 | 42 089-42 437 | |
| 760 | 42 919 | ±194 | 42 725-43 113 | |
| Product | Operating temperatures/°C | Nominal value of thermoelectric EMF | Level I | |
| Tolerance | Range of EMF | |||
| TP/TN | 100 | 4 279 | ±24 | 4 255-4 303 |
| 150 | 6 704 | ±30 | 6 674-6 734 | |
| 200 | 9 288 | ±43 | 9 245-9 331 | |
| 250 | 12 013 | ±56 | 11 957-12 069 | |
| 300 | 14 862 | ±70 | 14 792-14 932 | |
| 350 | 17 818 | ±74 | 17 744-17 892 | |
Our production as per norm GB/T 2614-2010,ASTME230,IEC6584.For further information or special request, please contact us.
Q1.What is the nature of the company?
A: We are a production enterprise, our company has its own factory.
Q2. What is the MOQ of an order of your company?
A: Our company's MOQ is 100 kg for each type of product.
Q3.Can I get a sample before mass production ?
A: Sample is free,the shipping cost of the sample is paid by the customer .
Q4.How long is the mass production cycle of product?
We will end the production within 15-20 days after receiving the deposit.
Q5.What payment method does your company support?
A: We can accept T/T, L/C ,you can choose the one which the most convenient or most effective for you .
A: We are a production enterprise, our company has its own factory.
Q2. What is the MOQ of an order of your company?
A: Our company's MOQ is 100 kg for each type of product.
Q3.Can I get a sample before mass production ?
A: Sample is free,the shipping cost of the sample is paid by the customer .
Q4.How long is the mass production cycle of product?
We will end the production within 15-20 days after receiving the deposit.
Q5.What payment method does your company support?
A: We can accept T/T, L/C ,you can choose the one which the most convenient or most effective for you .
