Audited Supplier
Nitride black coating 3D Modular tables fixture welding tables
As a professional manufacturer of 3D/2D flexible fixture combined welding platform, Wuxi Lemar Machinery Equipment Co.,Ltd has many years of experience in production and on-site installation.
With engineers, sales and after-sales service personnel, for many years, with its good reputation and after-sales service, it is favored by customers and friends.
Our welding jig kits can be easily assembled to ensure accuracy and parallelism.
All part numbers and sizes are fully modular and feature industry standard 16mm and 28mm hole patterns as standard for easy access to fixtures and tooling.
A set of perfect 3D flexible platform welding jig can only achieve the expected purpose by people to operate and use it correctly.
In addition, people are required to do safe operation and make the fixture durable.
Based on long-term experience, Wuxi Lemar, as a professional Chinese manufacturer of 3D/2D flexible welding platforms, puts forward the following suggestions:
(1) The following inspection and maintenance should be carried out on the fixture before use
1) Check and measure each locator and whether the placement of the 3D welding platform support angle iron is accurate. The worn positioning elements should be replaced to ensure the shape and size of the assembled and welded products are accurate and stable;
2) Check whether the stressed components are damaged or deformed. If so, they must be replaced to ensure safe and reliable use;
3) Remove the welding rod head and slag skin on the fixture, and properly lubricate the hinge and shaft;
4) Run and operate the empty car, check whether the movement status of each clamping mechanism is normal. If there is a cooling water and air pressure piping system, check for leaks, etc.;
5) Check the connection of the welding circuit and the insulation of various electrical appliances to prevent electric shock.
| Length*Width(mm) | Precision | Material | Weight(kg) | Oversize(mm) |
| 1000*1000*200 | Grade 3 | HT250/HT300 | 350 | 1000*1000*200 |
| 1200*1200*200 | Grade 3 | HT250/HT300 | 460 | 1200*1200*200 |
| 1500*1500*200 | Grade 3 | HT250/HT300 | 500 | 1500*1500*200 |
| 2000*1000*200 | Grade 3 | HT250/HT300 | 660 | 2000*1000*200 |
| 2000*1500*200 | Grade 3 | HT250/HT300 | 950 | 2000*1500*200 |
| 2400*1200*200 | Grade 3 | HT250/HT300 | 880 | 2400*1200*200 |
| 3000*1500*200 | Grade 3 | HT250/HT300 | 1400 | 3000*1500*200 |
| 4000*2000*200 | Grade 3 | HT250/HT300 | 2500 | 4000*2000*200 |
We have many different specification and can do the 3D hole Welding tables according to your need!
Please call or mail us immediately!
(2) Pay attention during use:
1) Check whether the positioning datum of the 3D flexible welding platform of the workpiece is in close contact with each positioning component. If there are individual poor contacts, find out the reason and overcome it. If the position of the locator is accurate, the clamping force may be insufficient, otherwise, the shape and size of the workpiece have errors, and the workpiece must be corrected at this time;
2) Unless it is for better control of welding deformation, it is generally not allowed to adjust and change the position of the positioner; 3) It is not allowed to hammer the workpiece on the positioning, supporting and other fixtures, especially in the clamped state, the vibration will reduce the self-locking performance of the clamp. For example, vibration can cause the eccentric clamp to loosen automatically. It is generally not allowed to use a hammer clamp to loosen or clamp the workpiece except that the elasticity of the wedge can be hammered;
4) Due to the thermal stress and deformation generated during the welding process, there is a large binding force on the fixture. When releasing the clamp, be sure to open the direction in which the workpiece rebounds and the direction in which the clamp withdraws to prevent injury.
