Audited Supplier
The specially treated spray gun need lecan with stand the scouring of hard materials such as glaze. Wear resistance is superior to any known material. Modified composites are more suitable for scouring in fluids.
Ceramic glaze refers to the glassy thin layer attached to the surface of the ceramic cup, which has the same physical and chemical characteristics as the glass state, impervious to water, smooth and glossy, not easy to stain, improve the mechanical strength, thermal stability and chemical stability of the product, and the glaze can also be decorated to enhance the artistic effect of the product.
The content of ceramic glaze components leads to severe wear on the nozzle of the spray gun during the spraying process, and the production is often low because the needle nozzle is not wear-resistant, and the labor cost is increased. The spraying robot is used to test the glaze, and the service life of the nozzle of the spray gun is increased.
In response to the above problems, find the right material, analyze the composition and physical properties of the ceramic glaze, and open a verification material specially suitable for ceramic glaze spraying, the service life of the needle nozzle has increased from the previous seven days to the present six months, and the production capacity and maintenance slope have declined.
| Model | GE-08-11 | GE-08-19 | GE-08-22 | GE-08-29 |
| Paint nozzle diameter | 1.1 | 1.9 | 2.2 | 2.9 |
| Air Consumption | 530 | 330 | 360 | 360 |
| Output | 500 | 270 | 400 | 500 |
| Pattern Width | 400 | 340 | 320 | 330 |
| Weight | 485 | |||
NISOO brand was founded in 2004, after 20 years, focusing on the development of non-standard coating process and peripheral equipment and parts in the coating industry. With independent intellectual property rights of processing technology and professional fluid research and development experience. Excellent R&D experience in gaseous and liquid mixed fluids. Products include spray gun, fluid transfer, spray control system, special spraying workstation, new environmental protection paint mist treatment station, valet design spraying process, spray system upgrade and other service areas. It has a number of patents and belongs to national high-tech enterprises. At the same time, it is a spray R&D partner of many universities.
The products are widely used and solve the complex process of glaze, water-based spraying, enamel, ceramic glaze and other applications . It also solves the application problems of intelligent micro workstation for multiple automotive spraying processes.
The company has proofing research and development equipment,which can quickly mold experimental spraying new concepts. With its own R & D team, we can develop customized spraying tools and systems to meet the market demand.
Needle and nozzle by special hardening treatment, not easy to wear, specific excellent wear resistance.
Suitable for abrasive coating of enamel glaze, ceramic glaze and so on.
We have obtained the requirements for the tool, the special G series spray gun, the use of good wear resistance alloy material to make the needle nozzle, anti-oxidation wear-resistant treatment, the wear resistance of G series spray gun is better than the ordinary spray gun 3 times. The special nozzle and the needle Angle, the number of needle nozzle wear can be hit 9.5 million times under 0.65MPa air pressure, combined with the excellent atomization of the general spray gun, the spray gun has been favored by the public in the daily ceramic industry.
Feldspar glaze is hard, strong luster, milky and soft, but the expansion coefficient is large, easy to produce crack glaze. Mostly used in porcelain and hard fine pottery and other products. The lime shaft has high hardness, much gloss and high transparency, but the melting range is narrow, and it is easy to cause smoke when it is fired in the original atmosphere.
Spray gun factory after strict testing, there is no quality problems, so there is no after-sales service.
