Nst8045 High Precision Cutting Die Steel Horizontal Band Saw Machine

Product parameter of NST8045

Main features:
1.Double hydraulic control saw feed speed, stepless speed adjustment, sawing more stable.
2. Hydraulic tensioning with saws is easy to install and tensioning, and easy to operate and maintain.
3. Saw wire speed adopts frequency conversion speed adjustment, can be made for different materials sawing.
4. Saw-cutting is stable and has high accuracy.
5. Hydraulic pressure is used to tighten the work clip, and the operation is fast and convenient.
6. Equipped with a sawing device, the sawing of the workpiece is more stable and improves material utilization.
7. Work efficiency digital display, simple and clear work process.
8. Install Chrome + grinding on guide cylindrical surface of saw beam. The precision of the matching gap of the guide copper sleeve is matched with the precision of the small gap at the factory to ensure that the feed is smooth when sawing.
9. The front and rear protection also meets the need to prevent the emulsion from splashing and overflowing to the floor of the workshop.
10. The blade angle torsion device needs to meet the flexible structure of the front end preparation torsion bearing, the hard alloy rigid guide wheel at the back end, and has high precision to ensure that the saw rod runs smoothly during the sawing process.
 Working environment:
1, ambient temperature above 0°C
2, air relative humidity not more than 85 %(equivalent medium humidity at 20 ± 5 °C)
Main mechanical structures
1, the foot is a steel plate welding parts, the left is a hydraulic fuel tank and hydraulic system, the right is a combination of a cooling system equipped with a cooling pump and cooling liquid.
2, beams are steel plate welding parts, consisting of worm gear reducer, saw wheel, guide with saw bar, protective cover, saw strip tension, beam, guide device.
3, the band saw bar is installed on the two wheels and the guide device. After the slave wheel is tightened, it is driven by the main motor. The band saw bar can make a circular motion around the two saw wheels to achieve the main motion of the saw. The saw beam is mounted on the cylinder to guide the upward and downward movement, thus completing the retreat and advance movement.
4, the main transmission system installed on the saw beam consists of the main motor, pulley, worm wheel speed reduction box. Frequency conversion speed adjustment to meet the requirements of sawing different materials and materials.

 details display