Product Description
PTFE THREAD SEAL TAPE is one kind of novel ideal seal material, the best material of anti-corrosive performance. It displays inertia to the majority chemicals and the resolver. And it has the ability to resist strong acid and alkali, water and the organic solvent. As a sealing filler for pipeline connections, PTFE tape can effectively prevent water leakage. It is wrapped around the joint of the pipe fitting that needs to increase the sealing effect, ensuring the airtightness of the pipeline by increasing the sealing effect. (What is ptfe tape?)

Width | 12mm 19mm 25mm (1/2",3/4",1") |
Thickness | 0.075mm 0.1mm 0.2mm |
Length | 1m-100m |
Density | 0.2g/cm3--4g/cm3 |
OEM | According to customer's requests |
Color | White,Yellow, Blue,pink,OEM |
Heat-resistance | Above370Celsius |
Cold-resistance | Below190Celsius |
Tensile Strength | >=8MPA |
Percentage elongation | >=25% |
Residual lubricant | <=0.5% |
High pressure resistance | 150~200KG/CM^2 |
Delivery | 30 days after getting 30% advanced payment |
Shrink | 10pcs/shrink |
Innerbox | 48pcs/box or 100pcs/box or 250pcs/box |
Outer Carton | 500pcs/ctn or 1000pcs/ctn |

1. Remove foreign objects from the connecting parts and keep them clean.
2. Pay attention to the wrapping direction. Taking the angle valve as an example, when the angle valve is screwed into the inner thread of the wall, it rotates clockwise to the right. The direction of wrapping the raw material tape on the angle valve is counterclockwise to the left. This way, when the angle valve is screwed, it will become tighter and will not loosen.
3. When wrapping, tighten the PTFE thread seal tape to make it tightly adhere to the thread, try to tighten it as tightly as possible, and do not loosen it. After wrapping, use your hands to rotate and press it tightly, or you can wrap it while pressing it.
4. As for the number of layers of wrapping, there is no strict regulation, which should be able to be tightened without leakage. However, based on experience, it is usually necessary to wrap more than ten times to ensure the sealing effect.
5. When tightening the thread, do not tighten it too hard. Just use a little force and it doesn't necessarily have to be too tight to prevent leakage. As long as the hand feels strong when tightening, it is sufficient.

Introdution | |||||||
Specification | Width: 3 - 100mm(routine :12mm,19mm,25mm) | ||||||
Thickness:0.07-0.2mm(routine:0.07mm,0.075mm,0.1mm) | |||||||
Length:4--50m(260",480",520") | |||||||
Density:0.15-1.2g/cm3 | |||||||
Special length, thickness, density are available upon request. | |||||||
Materials | 100% PTFE without oil | ||||||
Color for tape | White tape or colour tapes | ||||||
Color for shell | Various plastics colors are available upon request. | ||||||
Port | Shanghai or Ningbo (Any main China port) | ||||||
MOQ | 50000pcs | ||||||
Delivery time | 15 -30 days after receiving the deposit or L/C | ||||||
Advantages | competitive price&good quality&delivery on time | ||||||
Certificate | ISO 9001, CE, etc. | ||||||
Technical parameters | |||||||
Heat resistance | +370 degree centigrade | ||||||
Cold resistance | -190 degree centigrade | ||||||
Pressure resistance | up to 30 bar | ||||||
Tensile strength | >=8Mpa or control according to the demand | ||||||
Percentage elongation | >=25% | ||||||
Feature | easier to wrap under any environment |
Detailed specification | |||||||
Style No. | Width | Thickness | Length | Density | |||
12SS -01 | 12mm | 0.075mm | 4m | 0.15g/cm3-1.2g/cm3 | |||
12SS -02 | 12mm | 0.075mm | 5m | ||||
12SS -07 | 12mm | 0.075mm | 10m | ||||
12SS -08 | 1/2" | 0.075mm | 260" | ||||
12SS -13 | 1/2" | 0.075mm | 480" | ||||
12SS -14 | 1/2" | 0.075mm | 520" | ||||
12MS -18 | 12mm | 0.1mm | 10m | ||||
12BS -35 | 12mm | 0.1mm | 30m | ||||
12BS -38 | 12mm | 0.075mm | 50m | ||||
12BS-40 | 12mm | 0.2mm | 20m | ||||
19SS -42 | 19mm | 0.075mm | 10m | ||||
19SS- 44 | 3/4" | 0.075mm | 520" | ||||
19MS- 47 | 19mm | 0.1mm | 18m | ||||
19BS- 51 | 19mm | 0.075mm | 40m | ||||
19BS- 56 | 19mm | 0.2mm | 20m | ||||
19BS- 60 | 19mm | 0.2mm | 35m | ||||
25SS-64 | 25mm | 0.075mm | 10m | ||||
25BS-71 | 25mm | 0.075mm | 40m | ||||
25BS-72 | 25mm | 0.2mm | 10m | ||||
25BS-76 | 25mm | 0.2mm | 35m | ||||
Special length, thickness, density are available upon request. |


Taixing Hongshuo Electronics Co., LTD., is the manufacturer of PFE. Processing and production of all kinds of widening, thickening, waterproof raw material belt, and all kinds of raw material belt customization. With first-class production equipment, modern operation process, complete and scientific quality management system. Taixing Hongshuo Electronics Co., Ltd.s integrity, strength and product quality is recognized by the industry.
Taixing Hongshuo Electronics Co., Ltd. in line with the production principle of "quality for survival, reputation for development", has won the majority of new and old customers praise. Welcome friends from all walks of life to visit, guide, and conduct business negotiations.
Advantages:
We are a manufacturer and exporter of PTFE from Taixing, Taizhou.
2. We produce 100% oil-free PTFE tape.
3. We can accept small orders and welcome OEMs.
4. We can make the color of the scroll and lid according to your requirements.
5. Raw materials for valve core and cover: PP, PS.
We can pack according to your requirements.
We participate in the Canton Fair every year.
8. Sample: The customer provides us with detailed information, and we can send the sample in 5 days.
9. Visit: If you need to visit our factory, we can pick you up from Yangtai Airport. It takes an hour to get from Yangtai Airport to our factory.
Q1:Are you a factory or trading company?
A: Yes,we have own factory
Q2:Can I get some samples?
A: Yes,free samples are available for you.
Q3: How To Order quickly?
A: 1. Specified density
3. Specify thickness
4. Specify the width