Audited Supplier
It is an upgraded version of the DTS multifunctional decolorization and purification all-in-one machine. It can achieve waste oil purification at temperatures below 100 degrees without damaging the oil film and ensuring the highest oil quality.
This machine can effectively restore a single waste oil (including lubricating oil/anti-wear hydraulic oil/engine oil/gear oil/chain oil), making the waste oil index reach the standard of new oil, and put it into use in the original equipment without causing any damage to the original equipment.
Due to the use of the latest flocculation technology, this machine does not have a filter element! No filter element! No filter element!
Without a filter element, there are no consumables that need to be replaced frequently, saving processing costs and the cost of manual replacement or cleaning of the filter element.
 |  |  |
Competing Industry Equipment | Our Company's Equipment | Comparative Advantages |
Filter elements or paper filters | No filter elements | Reduces consumable costs, eliminates the need for filter cleaning, easy to operate, saves time |
High electricity consumption | Energy-efficient | Uses electromagnetic induction, saving 50% on electricity |
Direct heating | Constant temperature indirect heating | Constant temperature heating protects the oil quality, preventing rapid aging of the oil |
High-temperature direct heating | 360-degree indirect surround heating | Significantly improves safety |
Physical filtration | Flocculation purification | Can purify nanoscale impurities |
Direct evaporation to remove moisture | Flocculation adsorption of moisture | Saves energy, maintains the essence of the oil, does not produce sludge |
Cannot process heavily soiled oil | No restrictions | Broad processing range, strong processing capability |
Processed oil color is similar to waste oil | Processed oil color is 99.9% similar to new oil | Processed oil does not change color |
Can only accept moisture and mechanical impurities | Meets national standards (GB)Can accept all indicators | Allows customers to send samples for laboratory testing of all indicators |
Processed oil can only be used in simple cooling systems | Reusable in the original system and equipment | Can be used repeatedly in cycles |
Degradation of oil quality | No degradation of oil quality | Reduces the cost of purchasing oil |
Chongqing Fangsheng Purification Equipment Co., Ltd. has been committed to the research and innovation of regeneration and recycling technologies for industrial waste oil and chemical solvents since its establishment in 2007. The recycling rate of products processed by our company's equipment can reach over 99%, with almost zero emissions, providing a good solution for enterprises to reduce costs and increase efficiency, and effectively promoting the development of environmental protection and resource recycling.
Q: Will the anti-wear factor in the lubricant be damaged or lost after being decolorized and filtered by the equipment?
A: As DTS6 operates at medium to low temperatures, it can completely restore its appearance and kinematic viscosity without damaging its anti-wear factor.
Q: What is the replacement cycle for the filter element of DTS-6
A: DTS-6 adopts the latest technology. No need to replace the filter element, just clean it regularly.
Q: What is the oil yield of DTS-6?
A: 90% -99%. The specific oil yield should be determined based on the raw materials.
Q: What is the degree of reduction of waste oil that can be achieved?
A: Due to our globally leading products, we are able to reduce oil products to 99.9% using the latest technology.
Q:What types of oil can DTS handle
A: DTS can process used single type waste oil (including lubricating oil/gear oil/chain oil/hydraulic oil, etc.)
Q:Can DTS handle waste oil mixed with multiple varieties
A:Unable to process
