Audited Supplier
Automatic Door Safety Sensor
Active infrared safety beam photocell sensor (light barrier) for automatic sliding door safety presence detection. Available in single line or double beam.
Mounting a safety beam sensor or light barrier is an effective safety solution for automatic sliding doors, electric glass doors, automatic aluminum doors, or automatic frameless glass door systems.
Infrared signal emission from an eye on one side of the door frame reaches the receiver eye on the other side, it will build a
straight light path. As long as the ray path is blocked by kids, pets, disabled, or any persons standing in the passage, the safety beam sensor or light barrier will immediately detect the obstacle and stop the door from closing, preventing the people or objects in between from being clamped.
By default, the automatic sliding door will automatically close after holding a specific time. Hence, a safety monitor device has to be mounted on the door for presence detection. It can be a safety beam photocell sensor, a light barrier, or an active infrared safety sensor.
| Working voltage | AC/DC10-30vDc |
| Quiescent Current | 18mA(12V Electricity) |
| Operating Current | 58mA(12V Electricity) |
| Maximum Transceiver Distance | 10m |
| Output Contact Normally Open And Closed | Jumper cap selection setting (Default is normally open) |
| RX Cable Length | 5.5m |
| Tx Cable Length | 5.5m |
| Number of Beams | Single- or dual-beam option |
| Operating Temperature | -42~45ºC |
| Operating Humidity | 10~90%RH |
| Material | ABS |
| Controller Dimension | 109.5(L)*41.1(W)*25.6(H)mm |
| Beam Dimension | 19(L)*13(D)mm |
1. Using the wiring method, wiring is simple, convenient, and accurate.
2. Using microcomputer control technology, the system has high integration and strong stability.
3. The international general optical lens design has good focusing, reasonable control angle, and is easy to install.
4. Using special microcomputer coding transceiver technology, the transmitter and receiver have a long distance and strong anti-interference ability.
5. Adopting German receiving filtering, decoding, and amplification systems to effectively solve the problem of resisting natural sunlight interference.
6. it has a single or double group of transceiver lenses and separate connection outputs. The connection has good shielding properties and can control one beam of light or two beams of light.
7. After light occlusion triggers, the output can flexibly select normally open or normally closed signals. Wide voltage input design, valid for both 12-30V AC and DC power input.
8. The unique high-precision calculation mode and sunlight filter factor greatly improve the anti-interference ability of the system.
Shenzhen JUTAI Co.,ltd. was founded in 2006, as a high-tech enterprise integrating production, research and development,
manufacturing, and sales. The founders of the company have more than 10 years of work experience in the research and development as well as sales of RF products. JUTAI is committed to developing a series of high-end gates/doors opening entrance and safety products and solutions:
1. Gate free access mode:
Motion sensors, no-touch buttons, vehicle loop detectors, gate radar sensors, and infrared photocells.
2. Gate Safety mode:
Loop detectors, barrier radars, photocell beams, and safety light curtains.
3. Gate management mode:
Anti-copied Mifare readers, standalone readers, UHF long-range readers, remote controls, App controls,
ANPR car plate number recognition, parking ticket management, access control management, and the large-scale cloud software management platform (JUTAI Clouds Solution).
Contact JUTAI for more about Door automation sensors:
