Audited Supplier
BK-300A
ISO 9001:2008
25kg Per Woven Bag
White
Paint, Ink, Adhesive, Grease, Cosmetics
Powder
Jingyi
Kraft Complex Bag with PE. 25± 0.2kg
Huzhou, Zhejiang
Product Description
BK-300A is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.
1. Advantages:
☆ High gelling efficiency over low to medium polarity organic liquids,
especially in aromatic compounds.
☆ Ideal thixotropy property and anti-sediment property.
☆ High viscosity and excellent thickening property over a wide temperature range.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
2. Typical Properties:
3. Typical Applications:
4. Incorportions:
BK-300A belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 40%-60% by weight of BK-300A.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.
1. Advantages:
☆ High gelling efficiency over low to medium polarity organic liquids,
especially in aromatic compounds.
☆ Ideal thixotropy property and anti-sediment property.
☆ High viscosity and excellent thickening property over a wide temperature range.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
2. Typical Properties:
| Color | Appearance | Density | Moisture (@105ºC,2hrs) | Fineness through 200 mesh | Loss on Ignition ( @1000ºC ) |
| White | Free Flowing Powder | 1.7g/cm3 | ≤3.5% | ≥98% | ≤35% |
3. Typical Applications:
| Acrylic paint | Road paint |
| Alkyd paint | Inks(mineral oil) |
| Anti-corrosion paint | Inks(Nitro) |
| Baking paint | Adhesive |
| Bituminous paint | Putties and sealant |
| Chlorinated rubber paint | Lubricating grease |
| Polyester paint | Cosmetics |
| Primer paint | Waster water treatment |
| Refractory |
4. Incorportions:
BK-300A belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 40%-60% by weight of BK-300A.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.
5. Recommended Levels:
The amount of BK-300A rheology modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.1%-3.0% based on the total formulation weight.