Audited Supplier
Product Description
Maidfirm Low Temperature Thermoplastic Material is a special synthetic polymer polyester (PCL), which is processed by a series of physical and chemical methods.
It is in a stable state when in drying space with room temperature.Temperature at 65ºC-70ºC, the material will soften, can be stretched and shaped on patient directly, and revert to the type of rigidity feature at normal temperature.
Maidfirm Medical can offer you a suitable and good quality of thermoplastic to make any kind of splints like static splints, dynamic splints for upper limb and lower limb, body orthostics ,post-operative splints and any brace of orthoses, ect.
Thermoplastic splinting material details:
| THICKNESS | 1/16"(1.6mm),1/12"( 2.0mm), 3/32"(2.4mm), 1/8"(3.2mm), 3/16"(4.0mm) | Avaliable customized other thickness |
| SIZE | 920*610mm, 460*610mm, | Avaliable customized other size and pre-cut splint |
| PERFORATION | Solid, 1%, 5%, 12%, 22%,38%,ect. | Avaliable customized other perforation |
| COLOR | White, Beige, Blue, Black, Green, Brown, Red | Avaliable customized other color |
| FEATURES | 100% memory, low memory, Non-sticky, Sticky, Heating translucency, Heating non-translucency, Reheating, Re-molding X-ray translucent, Biodegradable | Avaliable customized different features thermoplastic material |
How to chooseThermoplastic sheet thickness:
Maidfirm Thermoplastic has five different thicknesses to fit your preferences and the type of splint you are fabricating.
1/16"(1.6mm),1/12"( 2.0mm), 3/32"(2.4mm),1/8"(3.2mm), 3/16"(4.0mm)
- 1/16"
- Lightweight
- Easy to cut when cold
- Ideal for pediatrics, finger splints and hand-based splints
- 1/12"
- Lightweight with moderate support
- Easy to cut when cold
- Ideal for pediatrics, finger, hand-based splints and other areas requiring lightweight support
- 3/32"
- Lightweight with moderate support
- Offers support while minimizing bulkiness
- Ideal for a wide range of static and dynamic splints or progressive splints where less weight is desired
- Examples include arthritis, thumb, hand, wrist and small area splints
- 1/8"
- Traditional thickness for firm support and stability
- Can be used for positioning and holding joints, aiding abnormal tone, contractures, and fracture bracing
- Ideal for static, dynamic, and progressive splinting of upper and lower extremities
- 3/16"
- Maximum rigidity
- Provides firm support and stability
- Ideal for body jackets, abnormal tone splints, lower extremity splints, and fracture braces
How to choose the perforaton:
Maidifrm thermoplastics also has solid options and a variety of perforated options, from 1% to 22%.
Solid and different perforations come in different weight and ventilation.
- Solid
- For maximum support
- Perforated 1% and 5%
- Provides slight ventilation
- Increases patient comfort without comprising rigidity
- Perforated 12%
- Lightweight
- Provides greater ventilation
- Increases patient comfort and compliance
- Perforataed 22% and 38%
- Lightweight
- Provides great ventilation
- Greater patient comfort and compliance
- Remark:
- Higher perforations soften more quickly and cool faster when heated
- For additional support, choose a thicker material with higher perforations
Maidfirm provides different type and features thermoplastic splinting sheet as options, and also accept customizd service to do the ideal thermoplastic for yourself. welcome to contact us for more details.
How to do Pre-cuts and Pre-forms Thermoplastic Splint:
Pre-Cut Splints: Flat, pre-cut thermoplastic splint blanks make splinting fabrication easy
Pre-Formed Splints: Pre-molded splints maintain their functional position and can be heated to customize them for your patients
Types of Splint:
Splints can be in different types including Static , Serial static, Dynamic, Static progressive.
Tips:
To choose a suitable one thermoplastic sheet material to do pre-cut splint or pre-formed splints.
We also accept customized service for different size and shape for pre-cut splint and pre-formed splints.
Welcome to contact us for more details.
Thermoplatstic splint material Operation:
Heat it in hot water at temperature 65ºC-70 ºC about 1-3 minutes ( different thickness in different heating time) , when it soften, take it out from water and use clean cloth to dry it. Meanwhile material temperature drops and feel it not to hot, then can directly mold on patien. After mold well and hold it in same position until material getting cool and rigidity, take out the molded material to cut well by scissors and smooth the edge to avoid hurt patien. Or using padding strip to wrap the edge. After that, put it back to patien and immoblizate it by hook and loop. In case it need to be adjusted, avaliable partially adjusted by heat gun.
Tips:
Different thickness comes in different heating time, working time and cooling time.
Welcome to contact us for more details.
Thermoplatstic splinting acceessories:
Maidfirm Medical can offer different splinting accessories to meet your splinting needs, like edge strip, padding, hook and loop, bandage, water bath(splint bath), scissors, heat gun, ect.
Product Pictures:
Guangzhou Maidfirm Medical Equipment Co.,ltd is one of leading manufactures specializing in R&D, production, marketing and service of low temperature thermoplastic sheets, medical splints and other radiotherapeutic location & orthopedics external fixation materials.
Our products can pass SFD,CE certification and ISO 13485 international quality management system detection.
We have an excellent team, consisting with professionals in the area of medical techniques, marketing and managements, setting with brand spreading as the same goal to supplying with technical support and overall customer services.
With unremitting efforts, we have established a good relationship with the customers from many countries and regions, including Asia, Europe, North America and Latin America, Middle East, ect.
1.Q:Are you a factory or trading company?
A:We are manufacturer, we produce radiotherapy immobilization mask, rehabilitation splints, thermoplastic splinting materials... For more, please visit our website.
2. What kind of thermoplastic you can offer?
A. We have some type of thermoplastic material for your choice. Maidfirm M and Maidfirm E.
3. How can I get the suitbable material?
A. We would like to send you small size of samples to you for testing, you just handle well freight cost that is fine. We accept prepay freight cost and freight collect. We will advise you.
4. How to heat material?
A.: Heating method- water heat or dry heat. Same as other famous brands of thermoplastic like Orfit,Aquaplast and Klarity, same heating method. Normally we use water bath to heat thermoplastic at most.
5. Do you have video to teach us how to fabricture with your thermoplastic splinting material?
A: Sure, we would like to do it.
6. What thickness you can offer?
A: 1.6mm, 2.0mm, 2.4mm, 3.2mm and 4.0mm, we also accept to custom other thickness like less than 1.6mm thick. Welcome to contact us for more details.
7. Dose your thermoplastic sheet has warranty time?
A: Yes, 2-3 years.
8. What about the quality?
A: Maidfirm medcial have been worked in this field for over 10 years and have good reputation in domestic market. We always insist on using raw material PCL from abroad and same precise technical to product low temperature thermoplatic. To win by quality, not by low price in poor quality.
