Audited Supplier
The high-speed and high-performance five-axis gantry machining center GF4030-5X has the characteristics of high rigidity, high precision and high efficiency processing. The split gantry design is adopted to increase the contact area with the column mounting base, which can greatly enhance the bending and torsional strength of the gantry; the workbench adopts a reasonable slider span to make the workbench evenly stressed; the base adopts golden ratio reinforcement The design ensures uniform force on the guide rail support surface and ensures the overall accuracy of the workbench operation; the whole machine adopts the best structural design to provide the best overall stability.
The three-axis rapid displacement is 30/30/30m/min, the T-T tool change time is only 5 seconds, the tool magazine is fully loaded, 24-hour tool change without alarm, and the 3-dimensional inspection of each machine's trial processing sample has passed, ensuring the high efficiency of the machine tool after leaving the factory. Continuous stability. It is suitable for various two- and three-dimensional concave and convex models with complex shapes and complex cavities and surfaces. It is also suitable for milling, drilling, expanding and boring of valves, cams, molds, plates and boxes in the manufacturing industry. Tapping and other processing procedures are more suitable for small and medium-sized batches of multi-variety processing and production.
Adopting Siemens' latest sinumerik ONE system, a 19-inch ultra-large LCD display, intelligent warning display, self-diagnosis and other functions make the use and maintenance of machine tools more convenient and faster; the high-speed bus communication method greatly improves the data processing capabilities and control of the CNC system performance.
| Item | unit | specification | |
| worktable | Workbench (length × width) | mm | 4000×2100 |
| T-shaped groove (number of grooves-width×pitch) | mm | 15-28×250 | |
| Maximum load of workbench | T | 14 | |
| Feed | X/Y/Z axis rapid displacement | m/min | 30/30/30 |
| B/C axis maximum speed | rmp | 60/60 | |
| cutting feed rate | mm/min | 1-15000 | |
| Travel | X/Y/Z axis travel | mm | 4200×3000×1000 |
| Door width | mm | 2600 | |
| Distance from spindle end face to worktable | mm | 60-1060 | |
| The distance from the 90° center of B-axis to the work surface | mm | 500-1500 | |
| Spindle left and right 90° end face to end distance (Y direction) | mm | 2120 | |
| Spindle front and rear 90° end face to end distance (X direction) | mm | 3320 | |
| Spindle | Spindle taper hole | mm | HSK-A100 |
| Spindle maximum speed | r/min | 8000 | |
| Spindle motor power (S1/S6 40%) | kW | 70/75 | |
| Spindle motor torque (S1/S6 40%) | N.m | 350/450 | |
| Tools | Tool magazine storage capacity | 60 | |
| Tool exchange time (T-T) | S | 5 | |
| Maximum tool diameter (full tool)/free tool/length | mm | 125/230/400 | |
| Maximum tool weight | kg | 15 | |
| Guides | X-axis guide rail | mm | 55 roller (3 rails) |
| Y-axis guide rail | 55 roller (3 rails) | ||
| Z-axis guide rail | 45 rollers (4 rails) | ||
| X-axis screw | mm | R80×30 | |
| Y-axis screw | mm | R63×40 | |
| Z-axis screw | mm | R63×16 | |
| B/C-axis | B swing/C rotation angle | ° | B/ C:±110°/±360° |
| B-axis rated/maximum torque | NM | 1600/2600 | |
| C-axis rated/maximum torque | NM | 1600/2600 | |
| B/C axis braking torque | NM | 6000 | |
| B/C axis maximum speed | Rmp | 60 | |
| B/C axis positioning/repeat positioning accuracy | arc-sec | 8/6 | |
| Accuracy | Linear axis positioning accuracy | mm | ±0.005/300mm |
| Repeatable positioning accuracy of linear axis | mm | ±0.003/300mm | |
| Lubrication system | Lubrication unit capacity | L | 10 |
| Lubrication type | / | Thin oil lubrication | |
| Cutting fluid | Displacement of water tank volume | L | 850 |
| Center outlet tank volume | L | 200 | |
| Other | air demand | kg/c | ≥6 |
| Air flow | mm3/min | ≥0.5 | |
| Power supply: three-phase AC | / | 380V±10%,50Hz | |
| Air pressure | MPa | 0.6 | |
| Machine weight (combined) | t | 45 | |
| Dimensions (L x W x H) | mm | 8100*4890*5127 | |
Q1:How can l choose the most suitable machines?
A: Please tell me your specifications, and we will help you select the best model, or you can choose the exact model yourself. Alternatively, you can send us the product drawings, and we will recommend the most suitable machines for your needs.
Q2: What are the main products of your company?
A: We specialize in all kinds of machines, such as CNC Lathe Machine , CNC Milling Machine, CNC Turning Machine, Vertical Machining Center, Horizontal Machining Center, Lathe Machines, Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
A: We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcome to visit us.
Q4. How do you transport it?
A: Provide Transportation Solution DDP/CIF/FOB/FCA.
Q5: What are the Payment Terms?
A: T/T, 30% initial payment when ordering, 70% balance payment before shipment.
Q6:What's the OMQ?
A: 1 set. (Only some low cost machines will be more than 1 set )
We want to know:
1. We strongly suggest you tell us the size, and material of your workpiece for our evaluation, if possible, better to send us a workpiece drawing so that we can recommend you the most suitable model.
2. If need a CIF Price, please kindly tell us the port of destination.
