Outdoor Solar Flood Light with 100 Watt Power 2.4 GHz Remote Controlled Self - Organizing Network Enabled

Price $128.00 Compare
Min Order 2 Sets
Shipping From Guangdong, China
Popularity 456 people viewed
Quantity
+-
 

Shen Zhen Goginsor Lighting Co. Ltd

VIP   Audited Supplier 2 years
Profile Certified by SGS/BV
HL-FR100RF
Lifetime Service
3 Years
LED Lamp
Aluminum Alloy
Solar
6000K/4000K/3000K (Option)
100W
Painted Matte
8h
Lithium Battery
6
Garden, Street, Factory, Parking Lot, Bus Stop
IP65
CE, RoHS
12/24V
With Light Source
24V40W
430X690X25mm
Mono Crystalline Silicon
22%
100W
3030SMD
175lm/W
7996lm
2.4 GHz Remote Control
Appr.100m
21V13ah
273wh
120 Degree
5-50 Hours
>75
Goginsor or OEM
Cartons and Pearl Cotton or Pallet
Light Size 335x235x160mm
China
9405410000
Product Description
Product Description

 Charging Indicator Light

            LED Indicator to show current battery level and charging status.
                        Green LED -   70% - 100% Charged
                      Yellow LED -   30% - 70% Charged
                            Red LED -       30% Charge or Less
                           Flashing LED of any color - Battery Charging 
           Please Note:
       The indicator will flash when charging, and when fully charged, it will display green.

       On/Off Switch Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.
 
 

Remote Control instructions:
1. A remote control can divide the lights into 4 groups, each group can be individually turned on and off and dimmed.
2. The controllable range of the remote control and light can reach up to 100 meters.
3. Use the Master Buttons to turn all lights On and Off Together.
4.
Use the Group Buttons to turn on individual lights. This is useful when there are multiple lights and grouping is required.
5.Press and Hold the Dimmer+/Dimmer-. All lights can be dimmed together.

Self-organizing network instructions:
    All lights installed at 50-100 meters will form a local area network. Each light is equivalent to a signal repeater in the network,
    so it can propagate the commands issued by the remote control one after another.
   

Restore Factory Settings
If necessary, you can remove the synchronization between the remote control and the light, the steps are as follows :
1. Turn on the light switch as soon as you see it turn on Press the Goup On "I" Button quickly 5 times.
 2. When the Light will flash five times to indicate 
 the synchronization has been cleared. 
 If there is no flicker, please repeat it.
    Or Press 
the master On"I" button to clear all synchronization.
 
 
Detailed Photos





Certifications

Packaging & Shipping

Company Profile

FAQ

1. Are you a factory or a trading company?

 A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4. What about the lead time?

 A:Sample needs 3-5 days, mass production time needs 2-3weeks.

5.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

6.How to deal with the faulty? 

A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.




 
 
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA