Audited Supplier
60000Nm3/h
New Energy
ISO
New
Low
Valve
Gas Manufacturing
Oxygen-Rich + Water Vapor
Hydrogen, Nitrogen, Co
Large
huangtai
Container
0~50kPaG
Jinan
Product Description
[Introduction] Oxygen-enriched gas users (30% ~ 90%) have higher heating value requirements, and users who need to modify the traditional fixed-bed gasification to produce synthetic ammonia gas head, the heating value can reach 2000kcal / Nm3;
[Coal requirements]: 0 ~ 12mm pulverized coal, coke, etc., not limited by the melting point of coal ash
[Gasifier]: oxygen-enriched + water vapor
[Reliability]: No rotating parts, can run continuously for more than 400 days
[Pressure range]: 0 ~ 50kPaG
Applicable scope of different gases
| Gasification type | Scope of application | remarks |
| Air gasification | General gas users with calorific value requirements | Calorific value about 1250kcal / Nm3 |
| Oxygenation(30%~90%) | Gas users with high calorific value requirements;Users who need to reform the traditional fixed-bed gasification to produce ammonia gas head | Calorific value up to 2000kcal / Nm3 |
| Pure oxygenation | Chemicals with low nitrogen content in the gas composition, such as the production of hydrogen, ethylene glycol and other products | Minimum nitrogen content <2% |
Technical characteristics
| Gasification type | Fluidized bed | Atmospheric fixed bed gasification | Air bed | |||
| Huangtai furnace air gasification | Oxygen enrichment in Huangtai furnace | Yellow table furnace pure oxygenation | Dry powder gasification | Coal water slurry gasification | ||
| Coal type requirements | 0 ~ 12mm pulverized coal, coke, etc., not limited by the melting point of coal ash | 0 ~ 12mm pulverized coal, coke, etc., not limited by the melting point of coal ash | 0 ~ 12mm pulverized coal, coke, etc., not limited by the melting point of coal ash | 6 ~ 50mm lump coal feed, high requirements on adhesion, thermal stability, strength, ash melting point, etc. | 0 ~ 90μm pulverized coal feed, there are certain requirements for ash content and ash melting point | 0 ~ 140μm coal slurry feed, high requirements for slurry concentration, ash melting point and ash content |
| Gasification agent | Air + water vapor | Oxygen + water vapor | Pure oxygen + water vapor | Pure oxygen + water vapor | Pure oxygen / Pure oxygen + water vapor | Pure oxygen |
| Reliability | No rotating parts, can run continuously for more than 400 days | No rotating parts, can run continuously for more than 400 days | No rotating parts, can run continuously for more than 400 days | Many rotating parts, need to set up a spare furnace | No rotating parts, can run continuously for more than 300 days | The burner needs to be repaired for about 90 days of continuous operation, and a standby furnace is generally required. |
| Pressure range | 0~50kPaG | 0~50kPaG | 0~50kPaG | 0~10kPaG | 0~4.5MPaG | 0~8.7MPaG |
| Gasification type | Fluidized bed | Atmospheric fixed bed gasification | Air bed | |||||
| Huangtai furnace air gasification | Oxygen enrichment in Huangtai furnace | Yellow table furnace pure oxygenation | Dry powder gasification | Coal water slurry gasification | ||||
| Efficiency | The efficiency of cold gas is 72 ~ 78%, and the energy efficiency of the system after matching the residual carbon furnace is as high as 95% | The efficiency of cold gas is 72 ~ 78%, and the energy efficiency of the system after matching the residual carbon furnace is as high as 95% | The efficiency of cold gas is 72 ~ 78%, and the energy efficiency of the system after matching the residual carbon furnace is as high as 95% | Cold gas efficiency 65 ~ 70% | Cold gas efficiency 72 ~ 82% | Cold gas efficiency 72 ~ 80% | ||
| Single furnace capacity | Effective gas production 10000 ~ 30000 Nm3 / h | Effective gas production: 10,000 ~ 50,000 Nm3 / h | Effective gas production 10000 ~ 55000 Nm3 / h | Effective gas production 1800 ~ 2400 Nm3 / h | Effective gas production 50000 ~ 220,000 Nm3 / h | Effective gas production 50000 ~ 220,000 Nm3 / h | ||
| Single furnace investment | Total investment is about 20 million yuan / kNm3 | The total investment is about 1.4 million yuan / kNm3 | The total investment is about 14.5 million yuan / kNm3 | The total investment is about 1.67 million yuan / kNm3 | The total investment is about 45.50 million yuan / kNm3 | Total investment is about 2.18 million yuan / kNm3 | ||
| Three wastes | No harmful gas emissions, no sewage emissions, slag does not contain harmful substances | No harmful gas emissions, no sewage emissions, slag does not contain harmful substances | No harmful gas emissions, no sewage emissions, slag does not contain harmful substances | Large amount of wastewater discharged, complex components and high treatment costs | No harmful gas emissions, small sewage discharge, slag does not contain harmful substances | No harmful gas emissions, less sewage discharge, slag does not contain harmful substances | ||
Gas washing ammonia purification and recovery process flow chart
