Audited Supplier
PE Cold Applied Tape Pipeline Anticorrosion Wrap Tape Making Machine
The equipment mainly consists of three parts: PE base film extrusion production line, Adhesive coating equipment, and slitting equipment.
The production process of cold-applied tape typically includes the following main steps:
Base Film Extrusion
Raw Material Preparation: Polyethylene (PE) is prepared as the base film raw material.
Extrusion Molding: The raw material is heated and melted in an extruder, then molded through a die to form a continuous base film.
Cooling and Shaping: The extruded base film is cooled and shaped using cooling rollers to ensure uniform thickness and consistency.
Adhesive Coating
Adhesive Preparation: Butyl rubber are prepared to ensure proper viscosity and stability.
Coating Process: The adhesive is evenly applied to one or both sides of the base film using coating equipment to form an adhesive layer.
Slitting
Slitting Preparation: The coated base film roll is prepared, and the parameters of the slitting equipment are adjusted.
Slitting Operation: The wide roll is slit into cold-applied tapes of the required width using slitting equipment.
Winding and Packaging: The slit cold-applied tapes are wound into rolls, packaged, and prepared for shipment.
Equipment List
PE basing file extrusion line
| Equipment Name | Quantity | |
| 1 | Vacuum automatic feeder | 1 |
| 2 | Hopper dryer | 1 |
| 3 | SJ-75X30 extruder | 1 |
| 4 | Hydraulic screen changer | 1 |
| 5 | Die head mold type 1000 | 1 |
| 6 | Multi-roller tape-casting machine | 1 |
| 7 | Winding machine | 1 |
| 8 | PLC computer control system | 1 |
Adhesive coating machine
| No. | Equipment Name | Qua. |
| 1 | Frame | 1 unit |
| 2 | 200N·M Magnetic powder brake + Silicone stick 1300mm with corona processor | 1 unit |
| 3 | 100N·M Magnetic powder brake | 1 unit |
| 4 | 100N·M magnetic powder clutch | 2 unit |
| 5 | 200N·M magnetic powder clutch | 1 unit |
| 6 | Screw | 1 unit |
| 7 | Force-feed device | 1 unit |
| 8 | Constant pressure system | 1 unit |
| 9 | Adhesive delivery pipe | 1 unit |
| 10 | Winding machine | 1 unit |
| 11 | Unwinding machine | 2 unit |
| 12 | Coating compound equipment | 1 unit |
| 13 | Main engine frequency converter | 1 unit |
| 14 | Extruder frequency converter | 1 unit |
| 15 | Thermal switch | 1 unit |
| 16 | PLC | 1 unit |
-Adopt advanced technology
-Stable operation
-High degree of automation, saving labor costs
-Good quality, meets international standard
-Supply full completed production solution: design, installation, commissioning,training
-Share you 389 sets of production experience from all the world
-Having 9 professional senior engineers
-Having a high-end plastic machinery equipment expert workstation in China
Our main products are:
1. HDPE jacket pipe for pre-insulated pipe Production Line (110-2000mm)
2. Rigid pre-insulated pipe Production Line
3. Flexible pre-insulated pipe(PERT) production line
4. Steel pipe FBE/2LPE/3LPE anti-corrosion coating line
5. Steel pipe derusting line
6. PE pressure pipe/Water Gas supply pipe production line
6. PP/PE plastic board/sheet/geomembrane production line
7. NBR PVC Thermal insulation tube/plate production line
8.Pipeline anti-corrosion materials and instruments: heat shrink joint coating sleeve, electro-fusion weldable joint sleeve, portable welding gun(extruder), PE PP welding rod.
Our team
Delivery
Exhibition
Certifications
