Audited Supplier
FT1005
PPR
Hard Tube
Thermoplastic Pipe
Transparent
Hollow
Round
Water Supply Pipe
4m/Bar
FameTop
Nylong Bag
20mm-160mm
China
9172200
Product Description
PPR Pipe For Hot and Cold Water With Grey Color;
Material: Hyosung R200p from Korea;
Availalbe size:20mm-160mm;
Color:Grey,White,Green or as customerized:
Max Working Temperature: 95C
Service Life: Over 50 Years;
CE Approved;
MAIN FEATURES:
Used for hot and cold water distribution systems,floor & central heating systems etc
Smooth inside surface,lower flow noise,preventing dirt build-up inside the pipe
Long service life over 50 years
Heat preservation,and engergy-saving,heat conduct cofficient is 1/200 of that of metal pipe
Light in weight,easy to install,cost effective
Fusion Instructions:
1,Mark the pipe
Mark the pipe for depth of penetration into the heater bush and fitting (see table). The mark must remain visible under heating and joining.
2,Heat pipe and fitting
Push the pipe and the fitting into the heating tools. Once pipe and fitting are hot (after the correct time), pull out pipe and fitting very slowly.
3,Joint pipe and fitting
Joint the pipe & the fitting and push the pipe until it reaches the mark (that has to stay outside).
During the jointing time the welded part of pipe and fitting must remain fix, without any rotation.
During the cooling time, the welded part of pipe and fitting can be adjusted until cold.
4,Fusion inspectoin
Fusion inspection. The outer fusion seam must be inspected. The seam must be present all around the pipe.
Material: Hyosung R200p from Korea;
Availalbe size:20mm-160mm;
Color:Grey,White,Green or as customerized:
Max Working Temperature: 95C
Service Life: Over 50 Years;
CE Approved;
| ITEM | SIZE | WEIGHT(G/M) | PCS/CTN |
| PPR (S5| PN10 For Cold Water,-10ºC ~50ºC) | 20X2.0 | 110 | 240 |
| 25X2.3 | 172 | 180 | |
| 32X2.9 | 280 | 100 | |
| 40X3.7 | 420 | 60 | |
| 50X4.6 | 640 | 40 | |
| 63X5.8 | 1000 | 32 | |
| 75X6.8 | 1420 | 20 | |
| 90X8.2 | 2030 | 16 | |
| 110X10.0 | 3000 | 12 | |
| 160X14.6 | 6250 | 4 | |
| PPR(S4| PN12.5 For Cold Water,-10ºC ~50ºC) | 20X2.3 | 130 | 240 |
| 25X2.8 | 195 | 180 | |
| 32X3.6 | 310 | 100 | |
| 40X4.5 | 500 | 60 | |
| 50X5.6 | 755 | 40 | |
| 63X7.1 | 1180 | 32 | |
| 75X8.4 | 1600 | 20 | |
| 90X10.1 | 2280 | 16 | |
| 110X12.3 | 3230 | 12 | |
| 160X17.8 | 7470 | 4 | |
| PPR(S3.2| PN16 For Hot Water,-10ºC ~95ºC) | 20X2.8 | 153 | 240 |
| 25X3.5 | 233 | 180 | |
| 32X4.4 | 385 | 100 | |
| 40X5.5 | 575 | 60 | |
| 50X6.9 | 867 | 40 | |
| 63X8.6 | 1410 | 32 | |
| 75X10.3 | 1855 | 20 | |
| 90X12.3 | 2853 | 16 | |
| 110X15.1 | 4200 | 12 | |
| 160X21.9 | 8870 | 4 | |
| PPR(S2.5 |PN20 For Hot Water,-10ºC ~95ºC) | 20X3.4 | 171 | 240 |
| 25X4.2 | 273 | 180 | |
| 32X5.4 | 433 | 100 | |
| 40X6.7 | 670 | 60 | |
| 50X8.3 | 978 | 40 | |
| 63X10.5 | 1650 | 32 | |
| 75X12.3 | 2340 | 20 | |
| 90X15.0 | 3360 | 16 | |
| 110X18.3 | 4930 | 12 |
MAIN FEATURES:
Used for hot and cold water distribution systems,floor & central heating systems etc
Smooth inside surface,lower flow noise,preventing dirt build-up inside the pipe
Long service life over 50 years
Heat preservation,and engergy-saving,heat conduct cofficient is 1/200 of that of metal pipe
Light in weight,easy to install,cost effective
Fusion Instructions:
1,Mark the pipe
Mark the pipe for depth of penetration into the heater bush and fitting (see table). The mark must remain visible under heating and joining.
2,Heat pipe and fitting
Push the pipe and the fitting into the heating tools. Once pipe and fitting are hot (after the correct time), pull out pipe and fitting very slowly.
3,Joint pipe and fitting
Joint the pipe & the fitting and push the pipe until it reaches the mark (that has to stay outside).
During the jointing time the welded part of pipe and fitting must remain fix, without any rotation.
During the cooling time, the welded part of pipe and fitting can be adjusted until cold.
4,Fusion inspectoin
Fusion inspection. The outer fusion seam must be inspected. The seam must be present all around the pipe.
