Audited Supplier
Description:
The regenerative 514C DC thyristor drive offers full four quadrant control of DC motors from single phase supplies. As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required. Together with the non-regenerative 512C they offer the perfect solution for lower power single motor and multi-drive applications.
Ambient:
Temperature : 0-40°C
150% for 60 seconds
Motor protection:
Stall condition 15 seconds internal
Electronic Overload Protection
Available frame sizes:
4, 8, 16 and 32 ampere
Parker SSD Drives 512C 32A Single Quadrant DC Thyristor (thyristor) Drive for 400V, 230V or 110V single/two phase supply.
Typical Motor Output from 400V AC supply: 8.2kW (11HP) at 320V DC for speed and torque control.
Typical Motor Output from 230V AC supply: 4.6kW (6.2HP) at 180V DC.
Typical Motor Output from 110V AC supply: 2.3kW (3.1HP) at 90V DC.
Simple to set-up in analogue, fully-isolated form and ready to run from its default settings.
Dimensions: 160mm Wide x 130mm Deep x 240mm High.
Mounting: Panel mount with screw fixings on 253 x 120mm centres.
Input Current: 48A
Input Voltage: 110V/120V, 220V/240V, 380V/415V, or 460V/480V single phase/two phase +-10% at 50/60Hz.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 75W at maximum output.
Part number: 512C-32-00-00-00, Exactly the same as SSD Drives, Rapier Drives, Eurotherm Drives and RS - 512C-32-01-00-00. Sometimes specified as 512C32000000.
Replaces SSD, Eurotherm, Rapier Drives and RS 510.
| TECHNICAL SPECIFICATION | |
| AC Supply Voltage | Single Phase 110V-480V ;50-60Hz |
| Current Rating | 4A / 8A / 16A / 32A |
| Overload | 150% for 60 seconds |
| Voltage selection | Jumper selection of supply voltage |
| Speed Control | 20:1 (arm v f/b),100:1 (tach fb) |
| Digital Inputs | Run,Enable,Stall override |
| Digital Outputs | Drive health |
| OPERATING ALTITUDE | Up to 1000m ASL |
| Part No. | Current | Part No. | Current | Part No. | Current |
| 506/3A | 3A | 512C/8A | 8A | 514C/8A | 8A |
| 507/6A | 6A | 512C/16A | 16A | 514C/16A | 16A |
| 508/12A | 12A | 512C/32A | 32A | 514C/32A | 32A |
OLD TYPE & NEW TYPE COMPARISON
SPARE PARTS
| Code | Model No. | Detais |
| 1 | 590PXD/0011/UK/0(AH500075U002) 590PD/0010/UK/0 | 590P control door (control board)/door assembly -Old model AH470372U002 |
| 2 | AH470372U001 | 590P main control board |
| 3 | AH470280U001 | 591P/15A 2Q power board |
| 4 | AH470280U002 | 590P/15A 4Q power board |
| 5 | AH470280U003 | 591P/35A 2Q power board |
| 6 | AH470280U004 | 590P/35A 4Q power board |
| 7 | AH470330U001 | 591P/40A-165A 2Q power board |
| 8 | AH470330U002 | 590P/40A-165A 4Q power board |
| 9 | AH466701U002 | 591P 590P/380A-830A power board |
| 10 | AH466703U002 | 590P 380A-830A trigger board |
| 11 | AH466704U001 | 590P Suppression Board |
| 12 | AH470330T021/2 | P terminal board |
| 13 | AH465315U001 | P LED connection board |
| 14 | AH466405U001/1 | P adaptor PCB |
| 15 | 6055/EI00/00 | 590P RS485 communication board |
| 16 | 6055/PR0F/00 (AH500602U001 core model) | 590P Profibus-DP board |
| 17 | 6901/00/G | operator inverface keypad, operator panel |
| 18 | AH385851U003 | power board - 2Q - medium voltage |
| 19 | AH385851U002 | power board - 4Q - medium voltage |
| 20 | AH387775U001(590/ENW) | encoder board |
| 21 | AH385457U001(AH500935U001) | armature field calibration board |
| 22 | 590DC/00/00 | spare 590DC control door |
| 23 | 590AD-00-00 | main control card (door) |
| 24 | VGO16-16 | 10A field module |
| 25 | VGO36-16 | 30A field module |
| 26 | LA466711U002 | P 380-830A cooling fan |
