Audited Supplier
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane
the production of controlled rheology polypropylene
(CR-PP) in an extrusion process.
TRIGONOX 301 Storage
Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To
minimize the loss of quality, Nouryon recommends a maximum storage temperature (Ts max. ) for each organic peroxide product.
Ts Max. :40°C (104°F)
Ts min. :10°C (50°F)
TRIGONOX 301 Note:
When stored under these recommended storage conditions, Trigonox® 301 will remain within the Nouryon specifications for a period of at least 12 months after delivery.
Organic peroxides are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest
temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test.
SADT: 110°C (230°F)
TRIGONOX 301 Method:
The Heat Accumulation Storage Test is a recognized test method for the determination of the SADT of organic peroxides (see Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria - United Nations, New York and Geneva).
Keep away from open fire, sparks and other sources of heat or ignition. Avoid contact with reducing agents (e.g. amines),
acids, alkalis and heavy metal compounds (e.g. accelerators, driers and metal soaps). PLEASE Store Trigonox® 301 ABOVE 10°C! Please refer to the Safety Data Sheet (SDS) for further information on the safe storage, use and handling of Trigonox® 301. This information should be thoroughly reviewed prior to acceptance of this product.
TRIGONOX 301 Major decomposition products
Carbon dioxide, Ethane, Methane, Ethyl acetate, Methyl ethyl ketone, Methyl acetate
TRIGONOX 301 Packaging and transport
The standard packaging is a 30-liter Nourytainer® for 25 kg peroxide formulation. Both packaging and transport meet the
international regulations. For the availability of other packed quantities consult your Nouryon representative. Trigonox®
301 is classified as Organic peroxide type D; liquid, Division 5.2; UN 3105.
Chemical name & Type | CAS number &short name | Model | Application |
1338-23-4 MEKP | Butanox HBO-50 | Fast-gelling MEKP, particularly suitable for the curing of laminating resins and lacquers. | |
Butanox LPT-IN | General purpose MEKP for extra long geltimes in standard orthophthalic resins, and the product choice for curing vinylester resins | ||
Butanox M-50 | High reactive, general purpose MEKP with low water content | ||
Butanox M-50A | Phthalate-free, medium-reactive, general purpose MEKP with low water content for curing unsaturated polyester resins at room temperature | ||
Butanox M-60 | Medium-reactive, general purpose MEKP with low water content, 10% higher active oxygen compared to Butanox® M-50 | ||
Trigonox Super 828 | Middle reaction activity, low H2O2 content | ||
Trigonox V328 | Middle reaction activity, low H2O2 content, low, | ||
Trigonox V388 | Middle reaction activity, low H2O2 content, low, | ||
Tert-Butyl peroxy-2-ethylhexanoate | Trigonox 21S | Initiator for (co)polymerization of ethylene, styrene, acrylonitrile and (meth)acrylates. Curing agent for unsaturated polyester resins | |
614-45-9 TBPB | Trigonox 93 | Developed for the cure of unsaturated polyester resins in the temperature range of 60°C and higher, faster cure | |
TRIGONOX C | Medium and high temperature catalyst | ||
Tert-Butyl peroxy-3,5,5-trimethylhexanoate | Trigonox 42PR | Developed for the cure of unsaturated polyester resins in combination with Accelerator NL-51PN (6% cobalt solution) in the temperature range of 60°C and higher | |
Methyl ethyl ketone peroxide and cumyl hydroperoxide | MEKP+CHP 1338-23-4, 80-15-9 | Trigonox 249 | Specially developed for curing unsaturated polyester and vinyl ester resins at ambient conditions ,include cast polymer and laminates |
94-36-0 | PERKADOX GB-50L | Free-flowing 50% peroxide formulation on a phthalate-free carrier for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications. | |
Initiator for (co)polymerization of styrene, acrylonitrile, vinylacetate, (meth)acrylates. Curing agent for unsaturated polyester resins | |||
PERKADOX BTW50 | 50% phthalate free dibenzoyl peroxide paste for curing unsaturated polyester resins at ambient and elevated temperatures | ||
Perkadox GB-50X | Free-flowing 50% peroxide formulation on a phthalate-free carrier for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications | ||
Tert-butylperoxy isopropyl carbonate | TBIC 2372-21-6 | TRIGONOX BPIC-C75 | Initiator: used for the polymerization of ethylene, styrene, acrylonitrile, acrylate and methacrylate. |
Di-tert-butyl peroxide | DTBP 110-05-4 | TRIGONOX B | Crosslinking agent, vulcanizing agent DTBP |
CHP 80-15-9 | TRIGONOX K-80 | Polymerization initiator for (co)polymerization of styrene, butadiene, acrylonitrile and (meth)acrylates and a curing agent for vinylester resins | |
TRIGONOX K-90 | Initiator for (co)polymerization of styrene, butadiene, acrylonitrile and (meth)acrylates. Curing agent for vinyl ester resins | ||
Methyl isobutyl ketone peroxide | MIBK 37206-20-5 | TRIGONOX HMA | Filament winding and production of flat and corrugated boards |
Tert-Butyl hydroperoxide | TBHP 75-91-2 | TRIGONOX A-W70 | Styrene, acrylonitrile, vinyl chloride, methacrylate polymerization |
Dilauroyl peroxide | LPO 105-74-8 | Laurox | Widely used initiator ,used in suspension and mass polymerization of vinyI chloride between 60°C and 80°C. |
1,1-Ditert-butylperoxy)-3,3,5- trimethylcyclohexane | CH335 6731-36-8 | TRIGONOX 29C90 | SMC&BMC process to extend storage time |
2,4-DICHLOROBENZOYL PEROXIDE | DCBP 133-14-2 | Perkadox OPC-50S-PS-MM | DCBP Rubber crosslinking agent |
2,5-Bis(tert-butyl peroxide)-2,5-dimethyhexane | 78-63-7 | TRIGONOX 101 | An effective peroxide for the production of controlled rheological polypropylene (CR-PP). It allows polypropylene producers to have great flexibility in controlling the melt flow index (MFI) of the polymer. |
Dicumyl peroxide | DCP 80-43-3 | Perkadox BC-FF | Used for rubber (natural rubber, synthetic rubber), polyolefin crosslinking |
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane | 24748-23-0 | TRIGONOX 301 | Peroxide formulation for the production of CR-PP and LDPE. Initiator for (co)polymerization of (meth)acrylates |
2,5-Dimethyl-2,5-di(tert-butylperoxy) hexyne-3 | 1068-27-5 | TRIGONOX 145-E85 | Bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins |
KETJENBLACK EC 300-J | For anti -electricity and conductive applications | ||
Ketjenblack EC-600JD | used for for anti -electricity and conductive applications | ||
Mixture of acetylacetone peroxide and tert-butyl peroxybenzoate in solvents | 614-45-9, 37187-22-7 | TRIGONOX 279 | Continuous laminating, resin transfer moulding, filament winding and centrifugal casting. |
Trigonox® 301 is an initiator for (co)polymerization of (meth)acrylates. Trigonox® 301 can be used for the market segments: polymer production and acrylics production with their different applications/functions.
1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .
2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.
3.Corporate With World Famous Brand, Quality Assured, Cost Effective .
4.Professional And Strong Technical Support.
5.Full Line Nouryon Brand Peroxides
6.Hot Chemicals, Short Of Supply Chemicals, We Have .
7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
Evergreen Chemicals Co., Ltd. is located in Wuxi on the shore of the Taihu Lake. it was established in 2019. After nearly five years of development and continuous innovation,we have became your one-stop shop for composite materials including unsaturated polyester resin, vinyl ester resin, epoxy resin, organic peroxide, glass fiber cloth, and related accessories. We stick to the business policy of "creating a brand with high quality, expanding the market with service, seeking development with innovation, and winning the reputation with integrity". We actively carry out domestic and foreign businesses, which are highly recognized by lots of clients. At the same time, we have a large number of high-tech R&D talents from famous college, a complete and scientific supply chain management and quality management system, high-end and advanced hardware equipment, which keeps us improving in the development process and making us occupy a leading position in the industry. The company insists the business philosophy of "customer first, forge ahead" to provide customers with the best quality services.
We also welcome O E M and O D M orders. you can talk to our customer service center about your sourcing requirements, We will provide you with the most professional service. Welcome final users and distributors from all the world contact with us and create success.
1. Q: Is your company a manufacturer?
A: Yes,we are. At the same time, we are also agents of other product brands.
2. Q: Does your company provide samples?
A: Yes,we can provide 100g and 200g for additive and 500g/1kg for resin as free samples, but freight usually requires the buyer to bear.
3. Q:What is your company's transportation form?
A: Samples generally deliver by international express, a large number of goods can be transported by land or water.
4: Q: What is the quality and price of your product?
A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .
5. Q: How many days the clear phenolic epoxy resin could sotre ?
A: 12 months below 25ºC in dark.
