Audited Supplier
LTY-M2500
Special Structure Bottle Blowing Machine
Automatic
1 Year
Special After-Sales Service Man
Automatic
Blow Air Down
Different Preform Diameter Distance
Fast and Air Blowing Moving
LOYALTY
Wrap Film Packing and Loading Into Container
1600pcs/hour
China
8477309000
Product Description
A .LTYM-2500B Stretch Blow Moulding System
B.Brief Introduction
LTYM-SS series is the most stable two-step fully-automatic pet stretch-blow molding machines(reheat). It has 2 to 8 cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 3500BPH(4-cavity), 6500-7200BPH(6-cavity)
5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost: Low consumption of electricity, air and water.
7).High Transparency: Easy maintenance, absolute safety, visual inspection, low noise.
C. Machine Features
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
D.Technical Parameters:
E.Configuration List
F.One Year Free Charge Spare Parts List
G.Other Terms and Conditions
i) Delivery: Within 40 days from the date of receipt of 50% downpayment
ii) Origin: P.R. China.
iii) Payment: 50% by T/T in advance 50% before delivery by T/T.
v) Insurance: To be covered by buyer.
vi)Validity: 4 weeks from the date of issue of this offer.
vii) Packing: Export standard seaworthy Packing.
viii) Installation: Our engineer will travel to buyer's country within 10-20 days after receipt of confirmation in the written form from client informing that the goods arrived in site and civil works is ready for installation. The client has to buy round tickets and arrange all local facilities including food, lodging, and transportation during their staying period in buyer's country. The buyer would pay USD 120/day for each engineer during journey.
ix) Warranty: One year from the date of Installation or acceptance of the Plant whichever comes first.
Note: If the client needs our manufacturer to provide the training program depending on the experience of the local people and the client requirement as the local people has no experience in this kind of plant, the client has to send their people (about 4 technical engineers/workers) to China to receive the training in their factories. The training time will be 20-30 days. The cost in this regard will be discussed later after confirmation of this proposal.
| LTYM-2500B stretch Blow Molding Machine (2-cavity,for maximum 2L bottle) (2,2L) | |||||
| Model | Parameter | Qty | Unit price (USD) | Total price (USD) | |
| LTYM-2500B stretch blowing molding machine | 2000-2800BPH for 12g 30mm 250ml bottle in stable production;12g 38mm 250ml 3000 | 1 set | |||
| Auxiliary Machines | |||||
| HP AC high pressure aircompressor | 2.4/30 | 1 set | |||
HP Air dryer Group | 3.0/30 | Including Three Air filters, Air dryer and 3.0/30 1m3 air tank31.0/30 | 1 set | ||
| Air Chiller | 3P | 1set | |||
| Blow Mould | 2-cavity Aluminum 7075 | 30mm2000ml | 1 set | ||
| Total Price USD FOB | |||||
B.Brief Introduction
LTYM-SS series is the most stable two-step fully-automatic pet stretch-blow molding machines(reheat). It has 2 to 8 cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 3500BPH(4-cavity), 6500-7200BPH(6-cavity)
5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost: Low consumption of electricity, air and water.
7).High Transparency: Easy maintenance, absolute safety, visual inspection, low noise.
C. Machine Features
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
D.Technical Parameters:
| Model | Unit | LTYM-SS2500 | LTYM-2500B | |
| Clamping System | Cavity Quantity | cavities | 2 | 2 |
| Clamping Force | KG | 35000 | 45000 | |
| Mold Stroke | mm | 90 | 110 | |
| Stretching Rod Stroke | mm | 300 | 400 | |
| Stretching Rod Dia. | mm | 12 | 12 | |
| Bottom Mould Stroke | mm | 50 | 50 | |
| Pitch Distance | mm | 76.2 | 120 | |
| Preform Holder Quantity | PCS | 62 | 52 | |
| Container Spec. | Max.Container Volume | ml | 650 | 2000 |
| Max.Container Height | mm | 260 | 330 | |
| Max.Container Diameter | mm | 68 | 115 | |
| Max Preform Height | mm | 100 | 140 | |
| Max.Neck Diameter | mm | 38 | 38 | |
| Output | BPH | 2000-3000 | 2800 | |
| Electrical System | Heating Oven Quantity | Zone | 2*2 | 4*4 |
| Number of Lamp | PCS | 2*8 | 4*8 | |
| Heating Power | KW | 15 | 20 | ||
| Installed Power | KW | 32 | 48 | ||
| Voltage | Voltage | Customized | Customized | ||
| Actual Power | KW | 25-30 | 30-35 | ||
| Air System | Operating Pressure | Mpa | 0.7-0.9 | 0.7-0.9 | |
| Blowing Pressure | Mpa | 2.5-3.0 | 2.5-3.0 | ||
| High Pressure Air Consumption | L/min | 2.4/30 | 2.4/30 | ||
| Chiller System | Temperature Range | Degree | 9-13 | 9-13 | |
| Pressure | Mpa | 0.4 | 0.4 | ||
| Capacity | HP | 3 | 3 | ||
| Machine | Machine Dimension | M | 2.8*1.9*2.2 | 3.3*1.8*2.2 | |
| Machine Weight | KG | 2000 | 2500 | ||
E.Configuration List
| Name | Origin | Brand | ||
| Inductive Sensor | Japan | Omron | ||
| Magnetic Sensor | China | Segula | ||
| Proximity Sensor | China | Segula | ||
| Power Switch | France |
| ||
| Breaker | France | Schneider | ||
| Intermediary Relay 24V | France | Schneider | ||
| AC Contactor 220V | France | Schneider | ||
| Signal Amplification | China | Touchwin | ||
| Touchscreen(PLC) | China | XinJie | ||
| 24V Power Box 24V | Taiwan | Delta | ||
| Heating Lamp | China | Jieneng | ||
| Motor in Preform elevator and unscramble | China | Taili | ||
| Adjustable Voltage Module | China | Aoyi | ||
| Temperature Regulator | China | Yatai | ||
| Throttling Valve | Taiwan | Airtac | ||
| Movement Valve | KOREA | ARK | ||
| Automatic type | China | XinJie | ||
| Stretching Cylinder | ||||
| Main Driving, Bottle | China | XinJie | ||
| Clamping Cylinder | ||||
| stretching, Mould clamping) | China | XinJie | ||
| Rail | Taiwan | PML | ||
| Cylinder for Pushing Preform | JAPAN | SMC | ||
| Cylinder in robot for evelating preform | JAPAN | SMC | ||
| Cylinder in robot for preform transfer | JAPAN | SMC | ||
| Preform Rotary Cylinder in Robot | JAPAN | SMC | ||
| Cylinder for Robot Clip | Taiwan | Mindman | ||
| Sealing Cylinder | Taiwan | Lind |
F.One Year Free Charge Spare Parts List
| No | Item | Qty |
| 1 | Infrared lamp | 10pcs |
| 2 | Stretch cylinder sealer | 4pc |
| 3 | HP Air pipe | 10m |
| 4 | LP Air pipe | 10m |
| 5 | Sealing cylinder seals | 4pcs |
| 6 | 24V magnet valve coil24V | 2pcs |
| 7 | Robot clip | 4 PAIRS |
| 8 | Magnetic switch | 1pc |
| 9 | Preform holder | 4SETS |
| 10 | Approximity Sensor | 1pc |
| 11 | Air Connector | 20pcs |
| 12 | Instruction | 1pc |
| 13 | Temperature controller module | 1pc |
| 14 | relay 24V 24V | 1set |
| 15 | Tool box | 1set |
| 16 | Inner hexagon spanner(4,6,8,10,12) | 1set |
| 17 | Solid wrench(8,10,12,13) | 1pc for each |
| 18 | Slot type screwdriver(3inch, 4inch) | 1pc for each |
| 19 | Phillipe screwdriver(3inch, 4inch) | 1pc for each |
G.Other Terms and Conditions
i) Delivery: Within 40 days from the date of receipt of 50% downpayment
ii) Origin: P.R. China.
iii) Payment: 50% by T/T in advance 50% before delivery by T/T.
v) Insurance: To be covered by buyer.
vi)Validity: 4 weeks from the date of issue of this offer.
vii) Packing: Export standard seaworthy Packing.
viii) Installation: Our engineer will travel to buyer's country within 10-20 days after receipt of confirmation in the written form from client informing that the goods arrived in site and civil works is ready for installation. The client has to buy round tickets and arrange all local facilities including food, lodging, and transportation during their staying period in buyer's country. The buyer would pay USD 120/day for each engineer during journey.
ix) Warranty: One year from the date of Installation or acceptance of the Plant whichever comes first.
Note: If the client needs our manufacturer to provide the training program depending on the experience of the local people and the client requirement as the local people has no experience in this kind of plant, the client has to send their people (about 4 technical engineers/workers) to China to receive the training in their factories. The training time will be 20-30 days. The cost in this regard will be discussed later after confirmation of this proposal.
