Audited Supplier
DMK-L8
Stretch Blow Molding Machine
PET
Stretch Blow
Automatic
Computerized
CE, ISO9001:2008
Customsized
DEMARK
International Standard for Sea Transportation.
5.5*2.2*2.2M 5800kg
China
8477300000
Product Description
1.Company Information
Demark Holding Group with working area of 180,000 square meters and with capital of USD 50 million, is one of the most important suppliers in China, offering the proposal of PET whole line solution. It is a modern technological enterprise which combines technological design, manufacturing and marketing as one. Since established, Demark specialized in the area of PET packaging, mainly offering the clients PET bottle factory project, from preform design to bottle blowing. Our mail products include PET preform injection molding systems, PET preform moulds, PET stretch blow molding machines etc.
2.Product desciption
A. Brief Introduction
DMK-L series are the most stable two-step fully-automatic pet stretch-blow molding machines (reheat). It has one to six cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Autoimmunization
2).High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 1000BPH per cavity.
5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost: Low consumption of electricity, air and water.
7).High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Technical Parameter:
3.Our Services
Demark Holding Group with working area of 180,000 square meters and with capital of USD 50 million, is one of the most important suppliers in China, offering the proposal of PET whole line solution. It is a modern technological enterprise which combines technological design, manufacturing and marketing as one. Since established, Demark specialized in the area of PET packaging, mainly offering the clients PET bottle factory project, from preform design to bottle blowing. Our mail products include PET preform injection molding systems, PET preform moulds, PET stretch blow molding machines etc.
2.Product desciption
A. Brief Introduction
DMK-L series are the most stable two-step fully-automatic pet stretch-blow molding machines (reheat). It has one to six cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Autoimmunization
2).High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 1000BPH per cavity.
5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost: Low consumption of electricity, air and water.
7).High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Technical Parameter:
| TYPE | ITEM | DMK-L8 |
| CONTAINER | Theoretical output | 8000 |
| Max.container volume | 0.7L | |
| Max.neck diameter | 38mm | |
| Max.container diameter | 70mm | |
| Max.container height | 250mm | |
| Max.perform height | 130mm | |
| Number of cavity | 8 | |
| ELECTRICAL SYSTEM | Motor power | 3KW |
| Heating power | 45KW | |
| Actual total power | 48KW | |
| AIR SYSTEM | Operataiting low pressure | 0.8-1.0Mpa |
| Low pressure consuming | 0.7-1.0m3/min | |
| Blowing pressure | 3.5Mpa | |
| High pressure consuming | 5-6m3/min | |
| CHILLER WHATER | Operating pressure | 0.3-0.5Mpa |
| Temperature | -10ºC~55ºC | |
| Flow rater | 70L/min | |
| MACHINE | Machine dimension | 5.5x2.2x2.2m |
| Machine weight | 5800Kg |
3.Our Services
We do the best for our customer.
blowmolding-machine.en.made-in-china.com
