Audited Supplier
Product Description
SCR series intelligent single-phase ac power voltage regulator module designed by single-chip microcomputer, is a high precision products independent developed by our factory, it solved the uneven products on the present market, such as signal input inaccuracy, unstable power adjusting, large error,etc.
Load voltage: three-phase 0 - 380V,
Current are rated:10A,25A,40A,60A,80A,100A, 120A,150A,200A
Manual Control Mode of Potentiometer
As shown in the figure, the higher the voltageat the adjustable terminal, the greater themodule output+ The 5V voltage is generatedby the module itself and does not need to beprovided externally. lt is only used in conjunctionwith the manual potentiometer, not for otherpurposes. The selected potentiometer resistanceis 10KΩ
0-5Vdc Control
As shown in the figure, it can accept 0-5Vdcanalog signals of single chip microcomputer,the positive pole ofinput control is connectedto 0-5V terminal, and the negative pole isconnected to COM terminal. The input impedancebetween 0-5V terminal and COM terminal insidethe module is greater than 30KΩ
0-10vdc Control Mode
As shown in the figure, it can accept 0-10Vdcanalog signals of PLC, etc. The input impedanceof 0-10Vdc end relative to COM end inside themodule is greater than 15K. When this mode isadopted, the+5V end and COM end are shorted.and 0-10vdc control end enters by way of
4-20mA Control Mode
As shown in the figure, 4-20mA analog signalof temperature control meter can be accepted,and the input impedance between 4-20mA endand COM end inside the module is 250Ω
| About Product Selection | |||
| Single-phase selection | 220V | Thermal unit | |
| resistive load | heat sink | ventilator | |
| SCR-1-10A | 1.3KW | 110*100*80 | 80*80mm 220V |
| SCR-1-25A | 3.3KW | 110*100*80 | 80*80mm 220V |
| SCR-1-40A | 5.2KW | 150*100*80 | 80*80mm 220V |
| SCR-1-60A | 7.7KW | 150*100*80 | 80*80mm 220V |
| SCR-1-80A | 10.3KW | 9225 | 90*90mm 220V |
| SCR-1-100A | 12.9KW | 9225 | 90*90mm 220V |
| SCR-1-120A | 15.4KW | 9225 | 90*90mm 220V |
| SCR-1-150A | 19.3KW | 9225 | 90*90mm 220V |
| SCR-1-200A | 25.7KW | 9225 | 90*90mm 220V |
| Three-phase selection | 380V | Thermal unit | |
| resistive load | heat sink | ventilator | |
| SCR-3-10A | 2KW | 110*100*80 | 80*80mm 220V |
| SCR-3-25A | 5KW | 110*100*80 | 80*80mm 220V |
| SCR-3-40A | 8KW | 150*100*80 | 80*80mm 220V |
| SCR-3-60A | 12KW | 150*100*80 | 80*80mm 220V |
| SCR-3-80A | 16KW | 9225 | 90*90mm 220V |
| SCR-3-100A | 20KW | 9225 | 90*90mm 220V |
| SCR-3-120A | 24KW | 9225 | 90*90mm 220V |
| SCR-3-150A | 30KW | 9225 | 90*90mm 220V |
| SCR-3-200A | 35KW | 9225 | 90*90mm 220V |
It is widely used in lighting equipment,temperature control equipment,Ac motor soft start,ac train wave speed control and other power automatic adjustment occasions.
It is widely used in lighting equipment,temperature control equipment and other power automatic adjustment occasions. Noted: Can't control AC motor speed!!!
Note: This type of voltage regulating module is not suitable for inductive loads such as transformers and motors.
Note: This type of voltage regulating module is not suitable for inductive loads such as transformers and motors.
Heating: electric furnace, injection molding equipment, thermoforming, textile equipment, infrared heating, drying system
Application Occasion:Lndustrial Kiln /Automatic Equipment /Heating Equipment /Lighting Equipment
Zhejiang Lingshine Electric Co., Ltd (Aigoodele), is a high-tech enterprise integrating production, sales and service. Our main products are frequency converter (VFD), soft starter (LSRQ), solid state relay (SSR), solid state voltage regulator (LSCR), high power rectifiers and so on (KP, ZP, MTC, MDS, MDQ, MDC, MDK, ETC). These products have been widely used in energy, petroleum, metallurgy, chemical industry, construction, plastics, textile, water supply, paper making, mining, printing and many other industrial fields. In addition, our products not only perform well in the domestic market, but have also been exported to dozens of countries and regions in Asia, Africa, Europe and other continents, winning wide international recognition.
We look forward to cooperating with every customer, welcome your guidance and suggestions, and work together to create a more brilliant future.
Q1.Can you provide price sheet and catalog to me ?
We are pleasure to provide these to you for reference,you can cotact me,give me your emails ID.
Yes,Sample order is available for quality check and market test .but you need to pay the sample fee and shipping cost
Q3.How long is your lead time?
2-3 days for the stocks items, mass production generally needed 1-2 weeks.
Q4.What's your payment terms?
We usually accept all kinds of payment terms.Such as T/T,L/C,Western Union.Cash.
Q5.What's your warranty terms?
We offer 12 months warranty time.
Q6.Do you have the products in stock?
Depends on your request,We have standard models in stock.Some special products and big order will be newly produced according to your order.
Q7 How about your payment and shipment?
Payment: We accept T/T, Western Union, Paypal, Cash etc.
We usually ship via DHL, UPS, FedEx or TNT, SF for small order and via ocean for bulk order according to your requirement.
Q8.How does your factory do the quality control?
Quality is priority,we always attach the importance to quality control from the beginning to the end of the production.every product will be fully assembled and carefully tested before packing and shipping.
