Audited Supplier
Pipe welding cars are widely used in petroleum, petrochemical, chemical, thermal, and heaven
Of course
Intovasical, non -abuse type adsorbing magnetic adsorption on the pipeline, welding while welding
Automatic crawling, installation, use and disassembly quickly complete, very convenient; there is
The rail type is mainly used for welding and orbit of stainless steel or pipelines that cannot be magnetized.
The specifications are customized according to welding needs.
Welding car magnetic adsorption on the pipeline, through preset parameters, handheld wired control
The welded welding parameters control the welding car automatically welded on the pipeline.
Features:
The entire position of the pipeline is automatically automatically automatically automatically automatically
Welding, welding process uses high -efficiency, low -cost carbon dioxide gas or mixing
Gas gas protection (80%grillet+20%carbon dioxide).
Performance advantage:
Applicable work conditions: various long -term pipelines, thermal pipelines, buried pipelines or workers
Art channels and other on -site welding mouths.
Welding material: carbon steel, stainless steel, alloy steel, low temperature steel, etc.
Applicable welds: more than 150mm in the pipe diameter, and the wall thickness is greater than 5mm
The pipes can be applicable, and the thick wall tube can use multi -layer and multi -channel welding.
Welded car: The design is light and easy to carry, and the permanent magnet adsorption, special
The pipelines suitable for the entire pipeline at the construction site are welded.
Body components: welding gun oscillator, slider, welding gun handle, control box, control panel and other accessories
(1) Swing: drives the welding gun to perform pendulum swing welding
(2) Driving part: the power device for the trolley to move, consisting of four magnetic forces It consists of wheels, helical gears, chains, and sprockets
(3) Slider part: a device for adjusting the position of the welding gun. It can be fine-tuned forward and backward during welding.
(4) Welding gun clamp: a clamping device for the welding gun, which can adjust the angle of the welding gun.
(5) Control box; all movements of the car can be adjusted. For details, please refer to the control panel operation method.
2, Selection knob for welding/non-welding: the knob must be in the welding position to weld
3, Point feed: manual wire feed device
4, Walking switch: control the car walking and stopping, if the "welding/non-welding" switch is placed in the "non-welding" position, open the walking switch, the tractor only walking without welding
5, Walking speed adjustment: the adjusting knob of tractor walking speed. It is recommended to adjust the tractor walking speed after turning on the walking switch
6, Choice of walking direction: choose to walk left or right
7, Power switch and indicator light: the indicator light is on after the power is energized
| Types | Content | Remarks | |
| Buggy | Power supply | AC 110V-220V | |
| Size | 330* 240 * 310 | L×W×H | |
| Weight | 16Kg | Wiggler included | |
| Moving | Four-wheel drive | Magnetic wheel | |
| Travel speed | 0∼700mm/min | ||
| Oscillating motor | DC24V 18RPM | ||
| Range of torch adjustment Range of torch adjustment | Up and down | ||
| Front and back | 85mm | ||
| Operating Angle adjustment range | 360 ° | ||
| Make the Angle adjustment range | 0 ° | ||
| Control | Operating functions | Swing mode selection | |
| Oscillating velocity | 0-10RPM (indicated with scale) | ||
| Swing range | 0-±10° (indicated with scale) | ||
| Left-right residence time adjustment | 0-2S (shown with scale) | ||
| Center move | 0 to + 8 ° | ||
| Tap the wire feed | |||
| Walk start/stop | |||
| Welding current/voltage control | |||
| Travel direction selection | |||
| Walking speed adjustment | 0 to 1000mm/min (shown on a scale) | ||
| Solder/non-solder selection | |||
1.Is your company a trading one or a factory?
Factory and trade (we have our own factory site.)
2.How long have your company run on horse carriage?
More than 10 years experience on horse carriage.
3.Which payment terms are you accepted?
T/T
4.When to deliver the goods after the order is placed?
It depends on the quantity of the products. Generally we can arrange shipment after 15 to 20 days.
5. Does your company accept customization?
We have excellent design team, and we accept OEM.
