Audited Supplier
Detailed Introduction:
Screw Diameter | 120mm |
Ratio of the Screw | 35:1 |
Barrel: | 38CrMoAIA, under the nit riding treatment and water-cooling compulsive feeding section |
Screw: | 38CrMoAIA, under the nit riding treatment |
Nit riding depth on screw | 0.4-0.6mm, hardness: HV>740 |
Nit riding depth on barrel | 0.5-0.7mm, hardness: HV>940 |
Barrel heating | 8 sections heating, cast aluminum heating ring, heating power: 6kw*8 zones Heated covered with stainless steel protection cover |
Barrel cooling | Fan cooling, fan power: 0.25kw*7 sets |
Reduction box | Hard tooth reducer, material of gear is 20CrMoTi, |
Driving power | 165kw motor, frequency control by ABB inverter |
| Production output | 350-400kg/h |
Complete mold set (including the mold die head, hydraulic screen
exchanger, distributor, and melt metering pump)
Three roller calender
1. Roller barrel: φ400*1750mm;
2. The three-roller rack is vertical type, steel plate welding structure;
3. The three-roller system is driven by three bevel wheel hard tooth gear reducer;
4. Spacing adjustment structure of the three rollers are Worm gear reducer;
5. Roller temperature controlling system is equipped with temperature controller.
Cooling bracket
1. Length: 9m,
2. Material is stainless steel tube, after polishing
3. Equipped with protective film coating device and side edge
cutting device, pneumatic cutting
4. Online edge cutting devices: two knives
5. Crusher to recycle the cutting edge wastage online.
Hual off
1. Hauling machine adopts rubber-roller cylinder to realize clamping.
2. Rubber roller size is φ250*1750mm.
3. Power of hauling off device: 2.9kw motor
4. Pulse counting metering: high precision rotary encoder
Cutter
Cutting width: According to model
Cutting mode: equipped with clamping hold-down device
Metering mode: fixed length metering device, with accurate and stable counting
Shearing: long time continuous cutting, the minimum cutting length is >500mm.
Accuracy: length error <=1mm, diagonal error is less than 3mm.
Final Products:
Custom Reference Data:
Board width | 500-2000mm |
Board thickness | 3-30mm |
Max. extrusion capacity | 350-800kg/h |
Production line speed | 15m/min |
Processing Type | Extruding Machine |
Factory Condition:
| Location | Indoors |
| Power Supply | No dangerous area |
| Humidity | ≤95% |
| Temperature | 0-40ºC |
| Power | 3-phase, 380V, 50Hz |
| Total Installed Power | 150KVA(Depends on machine model) |
| Cooling Water | ≤25ºC ≥0.3MPa, outdoor water tank: 15-20m³, water circulated with production line |
| Compressed air | 0.3 m³ /min, >0.5MPa, Equipped with 4-5.5kw air compressor |
| Production Line Dimension | 20m*3m*3.5m |
Company Profile:
Package & Transportation:
FAQ
Q2: How to get an accurate offer?
A2: Because our offer and technical specification is associated with your final product and requested capacity,we will choose the right model of extruder and mould after understanding all the information,then we could supply our plan.We could fully exchange information by Email, whatsapp or wechat.
Q3: Where is your factory and which port is the nearest to your factory?
A3: My factory is in Qingdao city, Shandong Province and the nearest seaport is Qingdao port.
Q4: How long is the delivery time?
A4: Generally it will take 30-45 days.
Q5: Could you send your engineers to our factory?
A5: Yes,we will send our engineers to your factory for installation,commissioning and training after machines arrive at your factory.In addition,if you need our engineers available in the future,we also could send our engineers.
If you have any questions, please do not hesitate to contact us. We Look forward to listening to you!
Pre-sale
We provide presales service in various forms, for example, making investment budget, manufacturing planning, etc. so that customers make a reasonable plan with less cost.
Investment budgeting---We provide services of product profit analysis, recommendation of machine and auxiliary equipment and relevant budgeting, human resources allocation and budgeting.
Plant Planning---We provide the mounting dimension of the equipment base, design of equipment layout, workshop ventilation, water transmission etc.
On-sale
Detailed design of workshop lay-out
Technological information of provided products
Schedule about design, manufacture and installation
Working & Producing process
Training courses for the technician team so that the installation is safe and standard
After-sale
For customers buying our products, we provide them training so that they can use and maintain the machine independently.
We will offer to customers technical support in time. If needed, we will offer on-line guidance and assistance.
We can provide free technical guidance if customers need new equipment, add or rebuild equipment.
We will prioritize the product upgrading of previous customers.
