Audited Supplier
The range of Structural and Non-Structural plywood includes:
- CD Structural Plywood
- CD Non-Structural Plywood
- Brace Ply
- CD T&G Flooring Plywood
- Structural plywood is for use in all permanent structural and engineered applications.
- A Bond is durable and permanent under conditions of full weather exposure and long term stress.
- Structural plywood should be preservative treated to ensure it lasts its full service life as it is manufactured from a range of hardwood and softwood timber species.
- For termite and rot resistance, plywood can be treated to H2 standards. Or for a lower cost alternative can be manufactured with a bifenthrin glue line additive which provides termite resistance but is only suitable for use south of the tropic of Capricorn.
CD Grade Structural Plywood
Pine structural plywood and Hardwood structural plywood are both manufactured based on AS/NZS 2269 using a phenolic "A" bond resin bonding the individual timber veneers.When structural plywood is to be continually exposed to the weather, H2 preservative treatment against fungal and termite attack is recommended.
AS/NZS 2269 F11/F14/F17 A-BOND SUPER E0
Veneer Grade
"C" grade face "D" grade back
Dimensions:
2400mm x 1200mm
Thicknesses:
9mm, 12, 15, 17, 19, 21 & 25mm
Species:
Selected Hardwoods
Density:
625-725 kg/m3 approx
AS/NZS 2269 F8/F11 A-BOND SUPER E0
Veneer Grades:
"C" grade face "D" grade back
Dimensions:
2400mm x 1200mm
Thicknesses:
7mm, 9, 12, 15, 17, 19, 21 & 25mm
Species:
Radiata Pine
Density:
525 kg/m3 approx
CD Grade Non-Structural Plywood
A versatile product that is manufactured from sustained yield forest estates (renewable source plantation pine) for building applications where structural properties are not specified.
Suitable applications include the home improvement market, temporary weather proofing, hoardings, formwork for driveways & paths and beneath flooring.
Specifications
MR, MELAMINE, WBP
Veneer Grades:
"C" grade face "D" grade back
Dimensions:
2400mm x 1200mm
Thicknesses:
5mm, 7, 9, 12, 15, 17, 18, 19 & 25mm
Species:
Popular, Pine, Eucalyptus
Density:
525 kg/m3 approx
Brace Ply
Used for structural bracing, F22 Hardwood Bracing plywood is available for use for structural bracing applications. Available in 6different sheet sizes in 4mm.
Brace ply is regularly used in applications such as the backing of cabinets, linings of a garage, and bracing in construction for both load bearing walls and roofs.
The plywood is sourced from resources that have been legally harvested and comply with AS2269 for the A-Bond Phenolic glue bond.
| Description | Grade | Application | Thickness | Length x Width |
| Plywood Bracing is an imported hardwood product which is made especially for the structural bracing of houses. It is made with an 'A' bond glue line. Available in treated H2 LOSP. *F22 is supplied untreated. Standard: AS/NZS 2269 Packing: 200pcs/pallets | F22* | Wall bracing Roof bracing Sub floors | 4mm 4mm | 2440X1200 2440X900 2745x900 2745 x 1200 3050X1200 3050X900 |
CD TONGUE & GROOVE FLOORING
Tongue and Groove plywood is strong and stable, with a pre-sanded C-grade face panel available in a range of thicknesses suitable for use in structural and non-structural flooring. It has a machined groove along its edges, with a single plastic tongue to form a tongue and groove joint between sheets
Certified under the Benchmark product certification scheme, CD T&G is an E0 panel with a stress grade of F8/F11.
CD T&G flooring is engineered to withstand concentrated loads and is ideal for commercial, industrial or residential installations. This flooring can be treated to H2 preservative levels, on request for protection against termites and environmental degradation. With a high strength to stiffness ratio, CD T&G is also suitable for truck floors, suspended floors or mezzanine structures and sporting facilities flooring.
| Description | Grade | Application | Thickness | Length x Width |
| CD TONGUE & GROOVE FLOORING PLY Eucalyptus core Radiata pine face C/D grade A-Bond Super E0 Standard: AS/NZS 2269:2012 thickness tolerance +/-0.5mm Available in treated H2 LOSP. | F8/F11 | Transportable Buildings Suspended Floors Sporting Facilities Residential Flooring Mezzanine Levels Truck Bodies Commercial Flooring Industrial Flooring | 12mm 15mm 17mm 19mm 25mm | 2400x1200mm 2700x1200mm |
HongCheng product is a high quality developed and engineered specifically for the Australia and New Zealand market. It is the professional supplier of Formwork LVL, Formply and Structural Plywood with BSI benchmark certificate according to AS/NZS 4357 for Formwork LVL, AS 6669 for Formply and AS/NZS 2269 for Structural plywood. With a three tier quality control program comprising; a detailed 'Manufacturing Specification' adhered to by trained staff; more than ten years experience quality control teams; and regular, detailed and recorded in laboratory testing on key quality requirements. HongCheng provides assurance of quality and consistency. All veneer in the manufacture is certified Forest Stewardship Council FSC ™(FSC-C145384) from sustainable forests.
Q: What service could you supply?
A: In addition to providing high quality standardized products, we can also provide special-sized products and customized services. More important, you could get the professional suggestion from our expert.
Q: Could I get some free samples?
A: We could send you the free samples via your express account. Or you could also prepay the postage to us. After the order confirmed, the express fee will be paid back.
Q: How about your payment terms?
A: We accept both T/T payment and irrevocable L/C at sight. For the T/T payment, we accept 30% prepayment in advance and the balance payable against copy of B/L.
Q: What is your delivery lead time?
Generally, we can deliver the goods to you within 7~30 days according to the purchase quantity after receiving your 30% prepayment or original B/L.
