Audited Supplier
Tungsten Carbide Wire drawing dies is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). Which can be applied to electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Carbide Wire drawing dies are tools with highly-polished, specially-shaped holes through which wire is drawn to reduce its diameter. They have a metal case and a nib made of: tungsten carbide (TC) polycrystalline diamond (PCD). The Carbide Wire Drawing Die can also withstand higher temperatures than standard high speed steel mould.
Feature
1. Wear-resisting: using GB class A cemented carbide mould core ,wire drawing dies mould core strength over 2200N/mm ³ ,do not crack
2. More wire rod can be drawed: the size area are 20% longer than common mould, which make sure our wire drawing dies can work longer!
3. Our die do not get out of steel jacket easily: using advance cold bushing tech, and interference bushing craft, the wire drawing dies are tightening connect with the steel jacket.
Grade List:
| Tungsten carbide grade for punching and heading dies | ||||
| Grade | Performance | Application recommended | ||
| Density | Hardness | Bend Strength | ||
| g/cm3 | HRA | N/mm2 | ||
| YG11 | 14.4 | 88.5 | 2600 | Forming or stamping dies for metal powders and nonmental powders. |
| YG15 | 14 | 87.5 | 2800 | For fabricating drawing dies of steel tubesand rods under high |
| compressibility ratio;punching,stamping,forging tools under large stress. | ||||
| YG20 | 13.5 | 85.5 | 3200 | For fabricating of stamping dies for watch parts, spring plates of musical |
| instruments, battery jars,small sized steel balls,screws,screw caps. | ||||
| YG16C | 13.9 | 85.5 | 2900 | Impact resistance, hot&forging dies etc. |
| YG18C | 13.7 | 84.5 | 3100 | Impact resistance forging dies,hot-press forging dies and rollers. |
| YG20C | 13.5 | 83.5 | 3300 | Dies for wear resistant or impact resistant application. |
| YG22C | 13.3 | 83 | 3500 | Nut forming dies and high impact resistance forging dies. |
| YG25C | 13.1 | 82.5 | 3600 | Stainless bolt header dies and rollers. |
Carbide drawing dies size list, for more size, do not hesitate to contact us.
Tungsten carbide blank nibs and finished wire drawing dies with steel case are both available in our company.
| Sr.No | Steel case size OD*H(mm) | Pellet size OD*h(mm) | Carbide die ID(mm) | Tolerance of ID (mm) |
| 1 | 25x12 | 8x6 | 0.6-1.0 | 0/-0.02 |
| 2 | 30x16 | 13x10 | 0.4-2.6 | 0/-0.02 |
| 3 | 32x23 | 16x13 | 0.4-3.5 | 0/-0.02 |
| 4 | 32x23 | 16x14 | 0.4-3.5 | 0/-0.02 |
| 5 | 40x28 | 20x17 | 1.8-5.2 | 0/-0.02 |
| 6 | 40x28 | 22x14 | 1.7-6.0 | 0/-0.02 |
| 7 | 40x28 | 22x18 | 1.7-6.0 | 0/-0.02 |
| 8 | 50x28 | 25x20 | 2.8-9.5 | 0/-0.02 |
| 9 | 70x35 | 30x22 | 5.5-12.5 | 0/-0.02 |
| 10 | 75x35 | 35x25 | 8.5-16.5 | 0/-0.02 |
| 11 | 80x35 | 40x25 | 16.5-24.5 | 0/-0.02 |
| 12 | 110x45 | 50x28 | 16.5-24.5 | 0/-0.02 |
| 13 | 120x50 | 60x35 | 24.5-34.5 | 0/-0.02 |
Drawing dies are typically used in the drawing of wire, rod, bar, and tube. The materials that are drawn are typically copper alloys, aluminum alloys, and steel alloys.
Tungsten carbide wire drawing die are widly applicable to many industries such as electronic devices, radar, television, instrumentation, aerospace, and many other high-precision industries.it is used for drawing low ,medium and high carbon steel coper,alumium and alloy wire . There are various sizes you can choose, and we can produce products according to your special designs and open mould in accordance with your requirements. Meanwhile there are various grades with different applications.
1) 100% virgin raw material
2) Customized,We have over 20 years' experience in the shaped tungsten carbide products.
3) Various kinds of material grades are available based on customer's application.
4) we have professional advanced production line and inspection equipment to ensure high quality products.
5) Advanced technology with precision ground and high polishing process.
6) High wear resistance, high hardness and impact toughness.
7) Excellent after-sales service.
FAQ:
We are Factory with 20 years of production experience.
Q2: What is the producing process?
Production process including powder process → formula according to the use requirements → wet grinding → mixing → smash → dry → sieving → add binder → dry again → get the mixture after sieving → pelletize → pressing → forming → sinter-hip → forming (blank) → blanks checking → passivating treatment → cylindrical grinding (according to the customer request) → cleaning → inspection of the finished product → packaging → entering warehouse.
Q3: How to control the products quality?
Q4: What is the transportation?
If small quantity , we suggest to send by express, such as DHL,UPS, TNT FEDEX. If with large quantity, suggest to ship by sea.
Q5: Can you provide OEM service?
Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products
Q6: How to place an order for Good performance nonstandard products by stellite alloy?
1. Fill your Order List in our online
Inquiry System (Also you can directly contact our salesperson by E-mail / Skype / Whats App)
2. We will make a feedback to you ASAP after receive your order list.
Q7: What's your delivery time ?
For the normal type which we have mold it takes 7-15 days after receiving the advance payment. For the non standard which we do not have mold it takes 15-35 days after receiving the advance payment.
Q8:How to contact us?
You can Contact me by E-mail, Trademanager, Skype, Mobile, whatsapp and so on
Our Test lab and Equipment
