AP-1
N/a
N/a
N/a
Specific Reagents
Industrial Grade
Oilfield Drilling Chemicals
Standard
Oilfield Drilling Industry
Polymerization
Polyamine
Industry
Polyamine
Light Yellow Viscous Liquid
up to 220ºC
Odorless
Shandong Deshuyuan
200 Kg Drum
High Quality
China
2921290090
Product Description
Polyamine Shale Inhibitor AP-1
Inhibit shale effectively with minimal viscosity and filtration increasing, control the clays dispersing, prevent bit balling.
Resist salt, calcium and magnesium and can be applied to freshwater, saltwater and seawater drilling and completion fluids.
Resist high temperature up to 220 ºC, can be applied to deep well and ultra-deep wells.
Freezing point is low, has cold-resistance, can be used in cold areas.
Protect oil and gas reservoirs.
Handling methods and dangerous data shall be referred to MSDS.





AP-1 is a type of shale inhibitor used in high-performance WBM. AP-1 possesses good cationic absorbability, inhibitory capacity and a long duration of action. It has overcome the problems which caused by cation, such as serious flocculation, increase filtration and so on. It mainly depends on the special structure which firmly absorbs on the clay to reduce the clay layer spacing to prevent water from invading into the formation in order to stabilize the borehole. The product can be directly added to all kinds of WBM. The recommend dosage is 1.75-3.5 ppb.
Items | Specifications |
Appearance | Light yellow viscous liquid |
Freezing point, ºC | ≤ -40.0 |
Total amine value, mmol/g | ≥ 5.0 |
Inhibiting rate of mud-making, % | ≥ 90.0 |
FLAPI Increase Rate after hot rolling,% | ≤ 50.0 |
Resist salt, calcium and magnesium and can be applied to freshwater, saltwater and seawater drilling and completion fluids.
Resist high temperature up to 220 ºC, can be applied to deep well and ultra-deep wells.
Freezing point is low, has cold-resistance, can be used in cold areas.
Protect oil and gas reservoirs.
It is a liquid packaged in 50L, 200 L, 1000L drums. International packaging may vary. And they shall be stored in a shady and dry place with good ventilation
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.





I . Filtration Reducer For WBM | |
DSP-1 HTHP Polymer Filtration Reducer | |
DSP-2 Polymer Filtration Reducer | |
PAN-Trol Low Viscosity Polymer for Filtration Reducing | |
PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
SMP Sulfomethylated Phenolic Resin | |
SMP-III Sulfomethylated Phenolic Resin | |
SPNH Lignite Resin for Drilling Fluid | |
LYS Modified Starch | |
SHR-1 Modified Starch HT | |
DACP Alkyl cellulose polysaccharide for drilling fluid | |
II. Shale Inhibitor For WBM | |
NP-1 Nano-polyester for Drilling Fluid | |
NS-1 Nano-SiO2 | |
FF-I Sulfonated Asphalt(High purity) | |
FF-V Sulfonated Asphalt(Ecnomical) | |
FF-III Emulsified Asphalt | |
AP-1 Polyamine Shale Inhibitor | |
POLYOL | |
DLA-1 Aluminum Based Shale Inhibitor | |
III. Lubricant For WBM | |
HEP-1 EP Lubricant for High Density Mud | |
EP-202 EP Lubricant for Drilling Fluid | |
EP-204 Oil Base Lubricant for Drilling Fluid | |
GR Solid Lubricant (Graphite base) | |
IV. Thinner For WBM | |
SF Silicon-fluorine Thinner | |
DLST CF Chromium Free Lignosulfonate Thinner | |
V. Lost Circulation Materials | |
SDF3 Compounded LCM | |
GWS-1 Delayed Expansion LCM | |
HFD-1 Rapid Filtrating High Strength LCM | |
VI. OBM Additives | |
OME-1 Primary Emulsifier for OBM | |
OME-2 Secondary Emulsifier for OBM | |
OFC OBM Filtration Reducer | |
OMP-1 Nano-Polymer Sealing Additive for OBM | |
OMP-2 Expanded Graphite Plugging Agent for OBM | |
VII.Defoamer For WBM | |
Polyether Defoamer | |
PD-100 Organosilicon Deformer | |
VIII. Bactericide For WBM | |
JM-1 Bactericide for Drilling Fluid | |
IX. Filtration Reducer For Cementing | |
DSPC-1 Filtration Reducer For Cementing | |
DSPC-2 Filtration Reducer For Cementing | |
X. Other Series | |
SR301 Pipe Freeing Agent | |
ZH-2 Corrosion Inhibitor for Drilling Fluid |