Audited Supplier
C9
Online Service
7 -10 Years Guarantee
Sunroof
Frost Prevention, Anti Fog, Anti Icing, Anti-UV & Glare
Polycarbonate
ECE, ISO
Safety Glass
ISO/TS16949
North America
1.2g/cm3
One Side or Both Sides
One Side or Both Sides
Transparent, Grey, Black and So on
Customerized
PE Protective Film, Carton, Wood Pallet/Customized
customized
China
Product Description
Company profile
Jiangsu ANKO Optical Materials Co., Ltd. is located in Jingjiang Economic and Technological Development Zone, Taizhou, Jiangsu Province, with a registered capital of 15,387,400 yuan and a factory area of 7,000 square meters. The main products are Polycarbonate sheet, Polycarbonate glass for vehicles and Polycarbonate innovative technology customized products, the company's products are widely used in construction, rail trains, passenger cars, construction machinery, bus and other industries.
The company focuses on the development and application of new products of PC transparent composite materials. It is the first enterprise in China to pass the ECE R43 test and certification for automotive plastic glass, and is committed to becoming the leader of innovative products of PC transparent.
The company focuses on the development and application of new products of PC transparent composite materials. It is the first enterprise in China to pass the ECE R43 test and certification for automotive plastic glass, and is committed to becoming the leader of innovative products of PC transparent.
Ø In 2015, our team started the PC products research and development, original from the Automotive Division of Kunshan Eson (a subsidiary of FOXCONN)
Ø In 2018, Suzhou ANKO was established and became the first enterprise in China to pass the EU ECE R43 test of automotive plastic glass and obtain E-mark certification and patents
Ø In 2019, ANKO obtained the Tier-1 supplier qualification of carmakers and CRRC, started mass production
Ø In 2020, Jiangsu ANKO was established to set up a unique factory to PC glass parts for automotive industry world
Ø In 2018, Suzhou ANKO was established and became the first enterprise in China to pass the EU ECE R43 test of automotive plastic glass and obtain E-mark certification and patents
Ø In 2019, ANKO obtained the Tier-1 supplier qualification of carmakers and CRRC, started mass production
Ø In 2020, Jiangsu ANKO was established to set up a unique factory to PC glass parts for automotive industry world
Factory Tour
Honors and certificates
1. The first company in China to pass the European
automotive plastic glass ECE R43 test and certification
2. One of China's national automotive plastic glass safety
standard setters, GB-9656 regulation
3. 21+ Patents covered all aspects of our Know-how
4. ISO9001
5. IATF16949
Item | Property | Value | Unit | Test Method | |||||
Physical | Density | 1.2 | g/cm3 | ISO 1183 | |||||
| (T=3mm) Haze | <0.8<> | % | ISO 14782 | ||||||
| (T=3mm) Light Transmission | 89 | % | ISO 13468-2 | ||||||
| Physical | Flexural strength | 98 | Mpa | ISO 178 | |||||
Nominal strain at break | >50 | % | ISO 527- 1,-2 | ||||||
Tensile Modulus | 2400 | Mpa | ISO 527- 1,-2 | ||||||
Yield stress | 67 | Mpa | ISO 527- 1,-2 | ||||||
| Weatherability | Anti-UV@380nm | <0.1%<> | - | - | |||||
| Electrical | Arc Resistivity | 250 | - | IEC60112 | |||||
Surface Resistivity | 1.00E+16 | Ohm.m | IEC60093 | ||||||
Volume Resistivity | 1.00E+14 | Ohm | IEC60093 | ||||||
| Test of resistance to abrasion | <=10% 500="" for="" cycles=""> | 6.19 | Hz | ECER34 A14/6. 1 | |||||
Flammability | UL94 | HB | - | ||||||
