Polyester Viscose Tr65/35 32X150d+40d Twill 160GSM Spandex Medical Fabric for Hospital Uniform

  
   Polyester Viscose TR65/35 32x150D+40D twill 160Gsm  spandex medical fabric for hospital uniform

Medical cloth is a very important module of our company, mainly used as important protective equipment to assist medical personnel and people entering specific medical and health areas. To ensure its protective effect, our medical protective clothing meets a series of strict quality standards.

1, Surface moisture resistance

The water level on the outer side of medical protective clothing fabric shall not be lower than the Level 3 requirement in GB/T4745-1997. This means that protective clothing has good waterproof performance, which can effectively block external moisture infiltration and ensure internal dryness.

2, Breaking strength and elongation at break

The sample material of protective clothing has a breaking strength of not less than 45N and has good tensile strength. At the same time, the elongation at break should not be less than 30% to ensure that the protective clothing can maintain a certain degree of ductility when stretched and is not easily broken.

3, Filtration efficiency

The filtration efficiency of medical protective clothing fabric for non oily particles is not less than 70%. This indicator measures the filtering ability of protective clothing for suspended particulate matter in the air, which is crucial for protecting wearers from harmful particulate matter.

4, Flame retardant performance

Medical protective clothing fabric with flame retardant properties meets the B2 level requirements in GB17591-1998. This means that protective clothing can slow down the burning rate when in contact with a fire source, providing additional safety protection for the wearer.

5, Antistatic properties

The electrical charge of medical protective clothing is not greater than 0.6uC, and it has good anti-static performance. This helps prevent spark discharge caused by static electricity, thereby reducing the risk of fire or explosion in specific environments.

6, Skin irritation

The protective clothing material has no skin irritation reaction, and the wearer will not feel uncomfortable or cause skin inflammation during long-term use.

7, Microbial indicators

Medical protective clothing fabric should meet the microbiological index requirements in GB15979-2002. This means that microbial contamination should be strictly controlled during the production, packaging, and storage of protective clothing to ensure that it does not pose a risk of infection to the wearer or patient during use. Protective clothing marked with the words "sterilized" or "sterile" on the packaging should meet the corresponding sterile requirements.

In summary, our quality standards for medical protective clothing cover multiple key indicators to ensure that it can provide comprehensive and effective protection. When selecting and using medical protective clothing, attention should be paid to these indicators and ensure compliance with relevant standards and requirements

Antibacterial, waterproof, and stain resistant:

moisture resistance: Not less than Level 3 requirement in GB/T4745-1997

Breaking strength:Not less than 45N

Filtration efficiency Not less than 70%

Flame retardant performance: B2 level in GB17591-1998
Medical Microbial indicators: GB15979-2002