Polymer Fuse Cutout, Drop out Fuses 11 Kv 200A

Price $11.00 Compare
Min Order 1 Piece
Shipping From Hubei, China
Popularity 388 people viewed
Quantity
+-
 

ORIENT ELECTRIC INTERNATIONAL GROUP LIMITED

VIP   Audited Supplier 11 years
Profile Certified by SGS/BV
PRWP-11/200
High
Distribution
High Voltage
Circle
T K
Fuse Link
IEC IEEE
IEC 60282-2,ANSI C37.41,ANSI C37.42
Asr, Mema Brackets
Poymeric
Grey
OEIpower
Cartons Pallets Wooden Case
IEC282-2 IEEEc37-41
China Nanyang
85351000
Product Description
CUT-OUT

 
ModelYH10W-11
Rated Voltage

10~15kV

Material of Fuse Support

Polymer

Rated Current of Fuse Tube100A, 200A, 300A
Interrupting Current (Asym.)8kA
BIL(Phase to Ground / Phase to Phase)95kV / 110kV
Power-frequency Withstand Voltage to Earth (1min)42kV
Power-frequency Withstand Voltage Phase to Phase (1min)48kV
Creepage Distance340mm
StandardIEC 60282-2,ANSI C37.41,ANSI C37.42
ClassDistribution Class
MEMA Type Mounting BracketsCouple with or not (As per clients' request)
Arc-shortening RodCouple with or not (As per clients' request)
Fuse Link

Couple with or nor (As per clients' request, please indicate

the fuse link rating of need)

Material of Fuse TubeFiber Glass
Material of ContactsRed Copper with Silver Plating
Material of CastingBrass (or bronze as per clients' request)
Material  of TerminalsBrass with Silver Plating (or others like tin, as per clients' request)
Terminal TypeParallel groove type ( or eyebolt type, as per clients' request
Other MaterialHot-dipped Galvanized Steel. Stainless Stell 304
Pachage StandardCarton and Pallet

Gama:
15 , 24 y 36 kV
12 - 25 - 40 - 63 -100 - 140 A
Número de Defectos: 1 , 2 (Estándar) , 3.
Tiempo de Regeneración : Min. 30s.
Principales Características :
Dispositivo Autoalimentado. Utilización conjunta con Interruptores automáticos.
Importante reducción en los costes derivados de mano de obra y sustitución de fusible de los Cut-Out
convencionales derivados de fallos transitorios, ocasionados por tormentas eléctricas , accidentes
vegetales , etc...
Ausencia de Arcos y desgaste en los contactos.
Reutilización del equipo tras su rearme manual y acoplamiento en su base.
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless

steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn't allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA