Audited Supplier
ZHD-8007
9016-87-9
-Nhoco-CH2-2o-Conhch2-6nhco-
9016-87-9
Pol/ISO
Liquid
Industrial Grade
Light Yellow
Fierproof
40-42kg/M3
Hard Polyurethane Foam
50-200mm
26.0%
30,5-31,0
20-30°c
Within 3-5 Days After Payment
0.12-0.20MPa
2000-2200MPa.S
Above 50°c
1 Drum
1,08-1,12g/cm3
Below 0°c
Heat Preservation and Cold Preservation
Zibo Huide
Steel Drum/IBC/Tank
200-220KGS/Drum
Zibo, China
3907299090
Product Description
ZH-8007 Polyol is used in the production of metal faced continuous sandwich panels. It is a 4 component system (polyol, catalyst, blowing agent and isocyanate), resulting foams are combustion modified to be classified as B2.
DESCRIPTION OF PRODUCT'S COMPONENTS
POLYOL COMPONENT: ZH-8007
ISOCYANATE COMPONENT: (PMDI)
TYPICAL COMPONENT PROPERTIES
RECOMMENDED PROCESS CONDITIONS
MACHINE PROCESSING
ZHD-8007-B (Isocyanate)
The Isocyanate has a shelf life of one year from date of manufacture when stored indoors at
temperatures of 20-30°C. Avoid storage temperatures of below 0°C (as some crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).
1. What is Polyurethane System material? Polyurethane system is a compound that includes 2 components, which are component A and Component B, Component A is blended polyol, Component B is Isocyanate. TDI or MDI is belong to Isocyanate.
2. Are you a factory or trading company?
We are a real factory in Zibo,China.
3. What is your MOQ?
200kgs/Drum
4. How to ship samples and mixed chemicals in bulk to clients?
Sample by air. 1 set advise by sea
5. Is your sample free?
50kgs sample is free, but the customers need to pay for the delivery express cost.
6. What types of PU foam system material you can offer?
We offer flexible system, semi-rigid foam system, rigid foam system, integral skin foam system.
7. What applications can use your PU system?
(1). Pineline system
(2).Spray system
(3)Refrigerator system
(4).Water heater system
(5).Imitation wood system
(6). Sandwich Panel system
(7).Slow rebound system
8. Do you provide product design and developing service?
We can develop foam formulation according to your technical requirements after business relations established.
9. Is your chemical formulation open to clients? Our formulation is unique, and non-disclosure, we can offer the technical parameters to you, and teach you how to mix the materials with the proportion.
10. What other service can you offer?
For MOQ of more than 20 tons, we can provide technical guidance service, one-stop service from equipment to foaming process
11. What is the packaging of the blended Polyol and ISO?
Polyol: 200-220 kg/barrel. Isocyanate: 250 kg/barrel. One pallet: 4 Barrels. 20 ft container: 80 barrels/18.8 tons. 40 ft container: not suggested, over-weighted.
12. Do you provide foam machine and mold?
We don't manufacture machine and mold,but we can help them sell their services. We can connect you to our cooperated machine factory and molding factory who has competitive price.
13. How to make payment?
DESCRIPTION OF PRODUCT'S COMPONENTS
POLYOL COMPONENT: ZH-8007
ISOCYANATE COMPONENT: (PMDI)
Core Thickness | 40mm / 60mm / 100mm / 120mm |
Density of core | 38-42kg/m3 |
Steel Plate Thickness | 0.4-0.6mm |
Metal Sheet | Color Coated Steel Sheet |
Galvanized layer of steel plates | Exterior plate and Inner plate: Aluzinc or Zinc coating |
Panel Length | According to customers' request |
Width | 1000mm |
TYPICAL COMPONENT PROPERTIES
| UNIT | ZH-8007CP | (PMDI) | TESTINGMETHOD | |
| DENSITY (25°C) | g/cm3 | 1,08-1,12 | 1,20-1,25 | DIN 51757 |
| VISCOSITY (25°C) | MPa.s | 2000-2200 | 210-250 | ASTM D 4878 |
| NCO CONTENT | % | - | 30,5-31,0 | ASTM 5155 |
RECOMMENDED PROCESS CONDITIONS
| UNIT | VALUE | |
| POLYOL COMPONENT | By weight | / |
| ISOCYANATE COMPONENT | By weight | / |
| CATALYST | By weight | / |
| BLOWING AGENT | By weight | / |
MACHINE PROCESSING
| UNIT | VALUE | |
| COMPONENT TEMPERATURES | °C | / |
| MOULD TEMPERATURES | °C | / |
STORAGE OF MATERIALS
The materials are sensitive to humidity and partially used drums should be tightly sealed to
prevent the ingress of moisture.
The materials are sensitive to humidity and partially used drums should be tightly sealed to
prevent the ingress of moisture.
ZHD-8007-A (Polyol Blend)
The Polyol blend has a shelf life of three months from date of manufacture when stored indoors
at temperatures of 20-30°C. The Polyol blend should be thoroughly mixed before use.
The Polyol blend has a shelf life of three months from date of manufacture when stored indoors
at temperatures of 20-30°C. The Polyol blend should be thoroughly mixed before use.
ZHD-8007-B (Isocyanate)
The Isocyanate has a shelf life of one year from date of manufacture when stored indoors at
temperatures of 20-30°C. Avoid storage temperatures of below 0°C (as some crystallization
may occur) or above 50°C (as formation of insoluble so lids may occur).
SAFTY PRECAUTIONS
Direct contact with ZHD-8007 can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
Direct contact with ZHD-8007 can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed. Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
Packaging & Shipping
FAQ
1. What is Polyurethane System material? Polyurethane system is a compound that includes 2 components, which are component A and Component B, Component A is blended polyol, Component B is Isocyanate. TDI or MDI is belong to Isocyanate.
2. Are you a factory or trading company?
We are a real factory in Zibo,China.
3. What is your MOQ?
200kgs/Drum
4. How to ship samples and mixed chemicals in bulk to clients?
Sample by air. 1 set advise by sea
5. Is your sample free?
50kgs sample is free, but the customers need to pay for the delivery express cost.
6. What types of PU foam system material you can offer?
We offer flexible system, semi-rigid foam system, rigid foam system, integral skin foam system.
7. What applications can use your PU system?
(1). Pineline system
(2).Spray system
(3)Refrigerator system
(4).Water heater system
(5).Imitation wood system
(6). Sandwich Panel system
(7).Slow rebound system
8. Do you provide product design and developing service?
We can develop foam formulation according to your technical requirements after business relations established.
9. Is your chemical formulation open to clients? Our formulation is unique, and non-disclosure, we can offer the technical parameters to you, and teach you how to mix the materials with the proportion.
10. What other service can you offer?
For MOQ of more than 20 tons, we can provide technical guidance service, one-stop service from equipment to foaming process
11. What is the packaging of the blended Polyol and ISO?
Polyol: 200-220 kg/barrel. Isocyanate: 250 kg/barrel. One pallet: 4 Barrels. 20 ft container: 80 barrels/18.8 tons. 40 ft container: not suggested, over-weighted.
12. Do you provide foam machine and mold?
We don't manufacture machine and mold,but we can help them sell their services. We can connect you to our cooperated machine factory and molding factory who has competitive price.
13. How to make payment?
You can pay through TT, or via bank wire transfer, L/C.
