Audited Supplier
2.HBT series ydraulic power chain shackle tong, equipped with a motor/diesel high pressure hydraulic pump station installed on the main body, the main pliers and back pliers each, each pliers with chain and a clamp oil cylinder, increase or reduce the chain, the clamp diameter drill is large, the main pliers with a push and pull twist and unloading cylinder. Twisting and unloading drill has drill bit, submersible hole hammer, screw drill, centering tool, drill pipe, drill collar, casing and so on. With its compact structure and simple operation, it can be used on the drilling platform to lift the drill pipe, drilling tool, drilling collar, drill bit and so on. It can be installed with or without wheel platform, and can be easily unloaded at the drilling site or workshop.
3.HDD Type B Manual Breakout Tong are essential tools in the field of horizontal directional drilling (HDD). These tongs are specifically designed to handle and loosen threaded connections during HDD operations.
4.HMT Hydraulic Shackle Tong
| HVT150 Main Technical Parameters | |
| Opening | 200mm |
| Clamping tube diameter | 70-195mm |
| Shackle torque | 150KN.M |
| Main clamping cylinder | 400KN |
| Rear clamping cylinder | 400KN |
| Torque cylinder | 250KN |
| Pump station | 380V/5.5KW |
| Pump flow | 23L/min |
| Pressure | 25MPA |
| Oil tank | 80L |
| Working size | 1000x600x1000mm |
| Approximate weight | 800KG |
| HVT250 Main Technical Parameters | |
| Opening | 260mm |
| Clamping tube diameter | 100-254mm |
| Shackle torque | 250KN.M |
| Main clamping cylinder | 500KN |
| Rear clamping cylinder | 500KN |
| Torque cylinder | 450KN |
| Pump station | 380V/7.5KW |
| Pump flow | 37L/min |
| Pressure | 25MPA |
| Oil tank | 120L |
| Working size | 1300x600x1200mm |
| Approximate weight | 1500KG |
| HVT500 Main Technical Parameters | |
| Opening | 270mm |
| Clamping tube diameter | 100-254mm |
| Shackle torque | 500KN.M |
| Main clamping cylinder | 980KN |
| Rear clamping cylinder | 980KN |
| Torque cylinder | 600KN |
| Pump station | 380V/5.5KW |
| Pump flow | 37L/min |
| Pressure | 31.5MPA |
| Oil tank | 120L |
| Approximate weight | 2800KG |
2.HBT series hydraulic chain shackle tongs:
| HBT100 Main Technical Parameters | |
| Suitable rods diameter | 80-200mm |
| Chain section | 8 section*2 |
| Pump flow | 8L/min |
| Working pressure | 25Mpa |
| Pump station Power | Motor: 2.2KW Diesel: 5HP(Choose one of the two) |
| Three-phase supply | 380V |
| Disconnected torque | 100KN.m |
| Connected torque | 80KN.m |
| Weight | 500kg |
| Dimension | 1000x800x700 |
| HBT200 Main Technical Parameters | |
| Suitable rods diameter | 4-24inch |
| Chain section | 23 section*2 |
| Pump flow | 15L/min |
| Working pressure | 20Mpa |
| Motor/Diesel Pump station Power | 3KW |
| Three-phase supply | 380V 50Hz |
| Disconnected torque | 200KN.m |
| Connected torque | 130KN.m |
| Weight | 900kg |
| Dimension | 1400x1300x1100(horizontal unload) |
| HBT350 Main Technical Parameters | |
| Suitable rods | 100-800mm |
| Pump flow | 15L/min |
| Working pressure | 25Mpa |
| Motor/Diesel Pump station power | 4KW |
| Disconnected torque | 350KN.m |
| Connected torque | 200KN.m |
| Weight | 1600kg |
| Dimension | 1500x1300x1600(horizontal unload) |
3.B type manual shackle tongs:
| Model | No. of Latch Lug Jaw | Latch Step | Size Range | Rated Torque(kN.m) | |
| in | mm | ||||
| M5A | 5a | 1 | 3⅜ ~ 4⅛ | 85.7~104.8 | 55 |
| 2 | 4⅛ ~ 5¼ | 104.8~133.3 | 75 | ||
| M5B | 5b | 1 | 4¼ ~ 5¼ | 107.8~133.3 | |
| 2 | 5 ~ 5¾ | 127~146 | |||
| 3 | 6 ~ 6¾ | 152.4~171.4 | |||
| 5b.1 | 1 | 5¼ ~ 5¾ | 133.3~146 | ||
| 2 | 6 ~ 6⅝ | 152.4~168.3 | |||
| 3 | 6¾ ~ 8 | 171.4~203.2 | 55 | ||
| M5C | 5c | 1 | 6⅝ ~7⅜ | 168.3~187.3 | 75 |
| 2 | 7⅜ ~ 8 | 187.3~203.2 | |||
| 3 | 8½ ~ 8⅝ | 215.9~219 | |||
| M5D | 5d | 1 | 8½ ~ 9⅝ | 215.9~244.5 | 55 |
| 2 | 10⅝ ~ 10¾ | 269.9~273 | |||
| M5E | 5e | 1 | 11¾ | 298.5 | |
| 2 | 12¾ | 323.8 | |||
| 5e1 | 1 | 103/4 | 273 | ||
| 2 | 113/4 | 298.5 | |||
| 5e3 | 1 | 13~133/8 | 330.2~339.7 | ||
4.HMT25 hydraulic shackle tong:
| HMT25 Main Technical Parameters | |
| Opening | 240mm |
| Clamping tube diameter | 40-230mm |
| Max. shackle torque | 25KN.M |
| Clamping cylinder | 200KN |
| Torque cylinder | 150KN |
| Pump station | 380V/4KW |
| Pump flow | 15L/min |
| Pressure | 20MPA |
| Working size | 800x500x400 mm |
| Approximate weight | 150KG |
Wuhan Yichao Technology Equipment Co., Ltd is a high-tech enterprise that integrates scientic research, design, production and sales. The company has strong technical force, advanced production technology, complete facilities, and has several senior technical engineers, constantly introducing more high-tech products suitable for market needs, which have good functional effect, and great market competitiveness.
In the process of development, the company continuously exchanges and cooperates with many domestic scientific research institutions. The ability to design, produce, maintain, debug and transform projects has rapidly increased, and the scale has continued to expand.
The company's aim is to provide customers with quality and cheap products, and provide considerate service. In order to meet different needs, we supply high-quality products for the industrial-grade market and provides regular-quality products for professional-level markets and users. As a professional manufacturer, we independently researches and develops a variety of professional production equipments that are suitable for the characteristics of its products. At the same time, we can also customize them according to your requirements.
