Audited Supplier
SR-303B
1 Year
Electric
New
CE
12 Months
Automatic
110mm*160mm*360mm,1kg
250mm*300mm*280mm,4kg
6000mh Lithium Battery, 10-21V-4.0A
About 5-6h
150-500rpm
PVC,Nylon,Cloth Base Adhesive Tape, etc.
Standard
3mm-35mm
sinrad
Carton Case
110mm*160mm*360mm, 1KG
China
Product Description
Automatic Tape Wrapping Machine Desktop Support Handheld
1.Full winding: The entire wiring harness is covered with adhesive tape, and the area of the adhesive tape is adjustable. 2.Dot wrapping: Tape is wound around one point of the wire harness according to the number of turns, and the number of winding turns can be set to one, two or more. 3.Flower entanglement: When tape is wrapped around the wire harness, it is not overlapped, and it is separated by a distance. The interval distance can be adjusted.
| Technical Index | Tech-Parameters |
| Support wire diameter | 3- 35mm |
| Tape width | 9-25mm |
| Applicable tapes | flannelette, acrylic tape, electrical tape, Acetate tape (no release paper) |
| Tape inner hole size | Ф38, Other sizes can be customized |
| Handheld wrapping speed | 1-4 gear. 150, 200,350, 500 turns/min |
| Desktop wrapping speed | adjust speed by button + - |
| OD max | less 110mm |
| Lithium battery | 6000mh, 10-21V-4.0A |
| Power adapter | 24v, 3A, 5.5*2.1 |
| Foot switch | with pedal |
| Weight of machine and battery | About 1.6KG |
| Machine Dimensions(L*W*H) | 110*160*360mm |
| packing size | 450*280*110mm |
| Packing Weight | 4 Kg |
1. Buttons description
1)Brake button: When the brake button is in the pressed state, and the blue light is always on. If you cancel the brake, you need to touch the brake button lightly.
2)Speed adjust button "-" : decrease the winding speed. The speed is 5 levels. The speed can be adjusted according to actual operation and production requirements.
3)Speed adjust button "+" : increase the winding speed.
4)Power switch: Press power switch, the machine is in standby state, the green light is always on.
Mode1: Double-click the switch button to start running, release it and click again to stop running.
Mode 2: Click the switch button to start running, release it to stop.
5)Start/Stop switch 6)Power adapter pinhole
7)6000MH lithium battery pin
8)Foot switch pinhole
When the machine is in standby and the green light is always on, double-click the (5) switch button to start running. When the switch button is pressed again, the flywheel will buffer for one circle and stop working. The machine is in standby state. If you manually turn the flywheel, you need to press the (1) brake switch. Press the button and turn it when the blue and green lights are always on.
2.Brief introduction of transmission part1)Flywheel
2)C-shaped blade seat fixing plate
3)blade seat
4)Tape Wheel
5)Roller
6)Tape wheel fixing plate
There is a hidden blade in the blade seat, which can effectively prevent the operator from being injured by accidental touch. The tape wheel (4) is used to install the tape, which is passed through (5) roller and (2) the blade seat fixing plate and placed on the blade seat.
The movement process of the transmission part: (6) The tape wheel fixing plate is fastened on the (1) flywheel, and the rotary motion of the motor during operation forms a rotary motion with the center of the flywheel as the center of rotation through the gears in the transmission part. Note: Do not touch the tape wheel when working, and always keep a safe distance of more than 60cm from the tape wheel.
3.MaintainanceGrease needs to be added regularly to keep the machine running smoothly.
Note:
A. Please turn off the power switch when injecting.
B. Injection interval 2ml/month.
4.Desktop base installationThere is the optional desktop base. (Additional purchase required.)
Application:
Other handheld tape wrapping machine
More detail contactfilix@customizemachine
