Audited Supplier
Customized
New
CE, ISO9001
Customized
Metal
Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
Stamping Parts
Fob, C&F, DDU, DAP
100% Inspection
15-25days
3-7days
Stamping, Bending, Cutting
Bag+Carton+Pallet, or According to Needs
According to drawing or sample
Qingdao, China
7326909000
Product Description
Stamping is a forming process that relies on presses and molds to apply external forces to plates, strips, tubes, profiles, etc., to produce plastic deformation or separation, so as to obtain workpieces of the desired shape and size (stamped parts). Stamping and forging are the same plastic processing (or pressure processing), collectively known as forging and pressing. The blanks for stamping are mainly hot-rolled and cold-rolled steel plates and strips. The world's steel, 60% to 70% of the plate, most of which are stamped into finished products.
Automobile body, chassis, fuel tanks, radiator panels, boiler ladle, container shells, motors, electrical appliances, iron core silicon steel sheet, etc. are all by stamping process. Instruments, household appliances, bicycles, office machinery, household utensils and other products, there are also a large number of stamping parts.
Automobile body, chassis, fuel tanks, radiator panels, boiler ladle, container shells, motors, electrical appliances, iron core silicon steel sheet, etc. are all by stamping process. Instruments, household appliances, bicycles, office machinery, household utensils and other products, there are also a large number of stamping parts.
The stamping process can be divided into four basic processes:
Punching: the stamping process that makes the sheet material realize separation (including punching, dropping, trimming, cutting, etc.).
Bending: the sheet will be bent along the bending line into a certain angle and shape of the stamping process.
Deep drawing: the plane sheet into a variety of open hollow parts, or hollow parts of the shape, size for further changes in the stamping process.
Local forming: with a variety of different nature of local deformation to change the shape of the blank or stamping stamping process (including flanging, expansion, leveling and shaping process, etc.).
| A. More than 15-year experience in casting and machining. |
| B. One-stop service,from mould design, casting, machining, surface treatment to delivery |
| C. Abundant technology force, steady production and inspection, professional after-sales service. |
| D. ISO9001, SGS, TS16949 certificate |
| E. Professional inspection equipment, three coordinate, X-ray flaw detector, salt spray testing machine, pressure testing machining, hardness tester,etc. |
| F. Rich experience in exporting to more than 30 countries |
| G. DDU and DAP service can be supplied accordingly. |
| H. Reply within 12 hours |
Stamping Process Characteristics
1. Stamping is a processing method with high productivity and low material consumption. Stamping process is suitable for the production of larger batch parts products, easy to realize mechanization and automation, with high productivity, at the same time, stamping production can not only strive to achieve less waste and no waste production, but also even if there is a corner remnant in some cases, it can also be fully utilized.
2, The operation process is convenient.
3, Stamped parts generally do not need to be machined again, with high dimensional accuracy.
4, Stamping parts have better interchangeability. Stamping stability is good, the same batch of stamping parts can be exchanged for each other, without affecting the assembly and product performance.
5, Because of the stamped parts with plate as a material, its surface quality is better, for the subsequent surface treatment process (such as electroplating, painting) provides convenient conditions.
6, Stamping process can obtain high strength, high stiffness and light weight parts.
7, With the mold mass production makes the stamping parts at low cost.
8, Stamping can produce the complex shape of the parts, which maybe difficult for other metal processing methods.
| Direct-Reading Spectrometer | Ultrasonic Flaw Detector | Impact Test Machine |
| Coordinate Measuring Machine | Digital Hydraulic Universal Tester | Surface Roughness Tester |
| X-Ray Tester | Stylus Profilter | Coating Thickness Gauge |
| Impact Tester | Video Measurement Machine | Hardness Test Machine |
| Gas Tester | Coated Sand Sample Making Machine | Electromagnetic vibration sand sifter |
| Metallographic Microscope | Tension Tester | Salt spray testing machine |
| *Q1: What is the MOQ? |
| A: MOQ depends on customers' needs, trial orders are also welcomed before mass-production. |
| *Q2: How long is the mass production? |
| A: It varies depending on product dimension,technical requirements and quantities. Lead time usually needs 25-35days. |
| *Q3: What should I do to get a quote ? |
| A: Please send us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and other technical requirement etc.) ,quantity, application or samples,more detailed information will be big help to us. Then price will be offered within 24h. |
| *Q4: How to know how is my order going on without visiting your company? |
| A: Detailed production schedule and weekly reports with digital pictures and videos which show the machining progress, will be sent to you. |
| *Q5: How can we process the order? |
| A: After confirming the order,Proforma invoice and payment list for deposit will be sent to you accordingly . After receiving your deposit, production will be arranged accordingly at once and finish goods about 25-30days based on different quantities. |
| *Q6: What payment terms do you accept? |
| A: T/T, L/C, Paypal, western union, etc. |
