Audited Supplier
LXSB-0
Bolt Connection
42m Wide and 30m High
EPS/Rock Wool/Polyurethane/MGO/Cement Foam Panel
Steel Sheet, Galvanized Steel, Stainless Steel
Q235/Q345
C/Z Section Steel, Q195/Q235/Q345, Galvanized
H-Section Steel
GB, ASTM, BS, SGS
Low-alloy High-tensile Structural Steel
Hot-Rolled Steel
Steel Column
High-Strength Steel
Wall Support
Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing, Frame Part, Steel Walkway and Floor, Steel Structure Bridge
Q345
Lixin
Seaworthy
By Customized
Foshan, Guangdong, China.
73089000
Product Description
This kind of steel structure building is differnet to other normal steel frame,it is made by special steel lattice beam,therefore this steel structure is more steady and stronger.
According to the requirements of different projects and clients,we will supply different design and steel products.If the steel building need high strength and resist earth quake well,we will consider to use steel lattice beam structure.
The span of steel structure building : from 10 meters to 100 meters (there is no column in the middle ).
Packing : Depend on clients' requirements,we can load the steel pieces by open top container or closed container with steel skid.
STEEL STRUCTURE BUILDING PRODUCTION (Fabrication) PROCESS :
1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;
2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)
3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)
4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)
5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.
6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )
Please check the details drawings as follow :
According to the requirements of different projects and clients,we will supply different design and steel products.If the steel building need high strength and resist earth quake well,we will consider to use steel lattice beam structure.
The span of steel structure building : from 10 meters to 100 meters (there is no column in the middle ).
Packing : Depend on clients' requirements,we can load the steel pieces by open top container or closed container with steel skid.
STEEL STRUCTURE BUILDING PRODUCTION (Fabrication) PROCESS :
1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;
2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)
3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)
4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)
5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.
6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )
Please check the details drawings as follow :
| Economic type (about US $30-$50/m2) | Mian steel frame | Span 5-8m (unrestricted width and length),less than 7 meters high,column and beam:square tube and C purlin (Q195/Q235) |
| Cladding material | Single layer steel sheet/EPS panel/brick wall(supplied by client at site) | |
| Door | sandwich panel silding door /single door | |
| Window | PVC window | |
| Usuage | Simple workshop,warehouse,garage,shading light shed,interim steel building etc. | |
| Suitable area | Africa,Southeast Asia,Middle East,UAE,Australia and other countries with low wind speed and no snow. | |
| Standard type (about US $45-$100/m2) | Mian steel frame | Span 10-30 m (unrestricted width and length),less than 20 meters high (column and beam:H section steel or welded by steel plate) |
| Roof and wall panel | EPS panel/glass wood/rock wool/polyurethane/Mgo/concrete panel/brick wall(supplied by client at site) | |
| Door | silding door /single door/roller shutter door | |
| Window | PVC / Aluminium window | |
| Usuage | workshop,warehouse,garage,shading light shed,shopping mall,office building,showroom,simple hotel etc. | |
| Suitable area | Africa,Southeast Asia,Middle East,UAE,Australia,South America,Canada etc. | |
| Crane | With or without (1 - 50 tons) | |
| Lage span and high strength type (about US $60-$150/m2) | Mian steel frame | Span 30-80 m (unrestricted width and length),less than 12 meters high (column and beam: welded by steel plate Q345) |
| Roof and wall panel | EPS panel/glass wood/rock wool/polyurethane/Mgo/concrete panel/brick wall(supplied by client at site) | |
| Door | silding door /single door/roller shutter door | |
| Window | PVC / Aluminium window | |
| Usuage | workshop,warehouse,garage,shading light shed,shopping mall,office building,showroom,simple hotel etc. | |
| Suitable area | Africa,Southeast Asia,Middle East,UAE,Australia,South America,Canada etc. | |
| Crane | With or without (1 - 50 tons) | |
| Fireproof type ( about US $60-$150/m2) | Mian steel frame | Unrestricted width,length,height and span |
| Roof and wall panel | Rock wool panel(50mm to 150mm thickness,density:60kg/m3 - 150kg/m3) or rock wool mgo panel | |
| Door | Fire proof door | |
| Usuage | workshop,warehouse,garage,shopping mall,office building,showroom,hotel etc. | |
| Suitable area | Africa,Southeast Asia,Middle East,UAE,Australia,South America,Canada and other countries with high requirement for firepooof . | |
| Crane | With or without (1 - 50 tons) | |
| Paint | Fireproof paint | |
| Heat insulation type (about US $60-$150/m2) | Mian steel frame | Unrestricted width,length,height and span |
| Roof and wall panel | Polyurethane panel(50mm to 200mm thickness,density: 35kg/m3 - 45kg/m3) or rock wool mgo panel | |
| Door | Polyurethane door or hear insulation door | |
| Usuage | coolroom,fresh-keeping cold storage,workshop,warehouse,garage,shopping mall,office building,showroom,hotel etc. | |
| Suitable area | Russia,Canada,Northern Europe and other countries with low temperature and high requirement for heat insulation . | |
| Crane | With or without (1 - 50 tons) |
