Audited Supplier
SCM-VA
Vacuum, Heating Homogenizer Disperse
20 Years Main Technical Support
Liquid, Viscous Fluid
Cosmetics, Iquid with Suspended Solids, Powder, VI
CE, ISO, GMP
New
Stainless Steel
Frame Mixer
Spiral
1
High Speed Mixer
Stainless Steel 304/316
220V/380V 50/60Hz Can Custom Made
0-3500rpm
Automatic or Manual
High Efficency
Mixing Heating Homogenizer
Easy to Operate
Botton/Top Homogenizer
Hydraulic Lifting Lid
Water Cooling
Simense /ABB
Steam/Electric Heating
Water Tank and Oil Tank
Homogenizer
Continuous Operating
Scmixer
Wooden Case
300*300*280cm
Guangzhou
8479820090
Product Description
https://scmixermachine.en.made-in-china.com/product/EmiUwMsDCIpZ/China-Paste-Cream-Production-Line-Cream-Paste-Sauce-Jam-Honey-Liquid-Detergent-Shampoo-Oil-Water-Beverage-Bottle-Automatic-Piston-Filling-Capping-Labeling-Production.html
Cosmetic Viscosity Cream Paste Vacuum Emulsifying Mixer Homogenizer Machine Production Equipment(Turn-key project)
SCM-VA Vacuum emulsifying mixer (bottom homogenizer), this agitator has the functions of emulsifying, homogenizing, heating and etc. It is suitable for producing emulsion or cream viscous product. It is widely used to product medicine emulsion, ointment, vanishing cream, facial mask, face cream, emulsion flavor, oil-water emulsification, emulsified asphalt, resinification, wax emulsion, waterborne polyurethane emulsion, pesticide, tissue homogenate, dairy production emulsion, juice, ink, jam.
Note that it is essential to keep low product losses, and Scmixer designs the machine as a short time cleaning to support frequent batch changes. Vacuum pumps and CIP valves are fully integrated in a manner consistent with GMP requirements to facilitate the cleaning of the external surface.
New product lab emulsifier high shear mixer prices/ Lab High Speed Shear Homogenizer
In the process of producing emulsion with high viscosity, there are two important problems.
- One is the scattered bigger diameter particles.
- The other is the air which will mix into the material during the mixing. Particles of the large diameter will lead to the labile state of the materials. If the air goes into the material, the material will be mixed with bubble, polluted by bacterium, easily oxidized and obtained an rough appearance .
Details picture
Electric Cabinet
SUS304 control panel: button / PLC touch screen (option)
Ampere meter, Voltmeter
Real-time Temperature display
Mixing system control (frequency control)
Vacuum system control
Hydraulic lifting system control
SUS304 control panel: button / PLC touch screen (option)
Ampere meter, Voltmeter
Real-time Temperature display
Mixing system control (frequency control)
Vacuum system control
Hydraulic lifting system control
Frame Wall Scrapper Mixer
SUS316L Wall scrapper mixerPTFE scraper
Fixed propeller, 45degree blades on opposite angles to make sure mixture complete
Siemens motor drive, 0-65rpm with variable speed controlTWO WAYS wall scrapper mixer
HELIX scrape mixer(OPTION)
SUS316L Wall scrapper mixerPTFE scraper
Fixed propeller, 45degree blades on opposite angles to make sure mixture complete
Siemens motor drive, 0-65rpm with variable speed controlTWO WAYS wall scrapper mixer
HELIX scrape mixer(OPTION)
Frame Wall Scrapper Mixer
SUS316L Wall scrapper mixerPTFE scraper
Fixed propeller, 45degree blades on opposite angles to make sure mixture complete
Siemens motor drive, 0-65rpm with variable speed controlTWO WAYS wall scrapper mixer
HELIX scrape mixer(OPTION)
SUS316L Wall scrapper mixerPTFE scraper
Fixed propeller, 45degree blades on opposite angles to make sure mixture complete
Siemens motor drive, 0-65rpm with variable speed controlTWO WAYS wall scrapper mixer
HELIX scrape mixer(OPTION)
Why the tank with homogenizer is best ?(AIK homogenizer)
Emulsification is the process of mixing two liquids that are difficult to mix. The main purpose of emulsification is to disperse the discontinuous phase into smaller droplets. The rotor-stator device is particularly suitable for emulsification tasks. The combined action of high shearing force and high expansion force in the mixing head makes the droplets small. In addition, the large turbulence enables the rotor-stator device to help transport emulsifier molecules quickly to the reformed surface.
Emulsification is the process of mixing two liquids that are difficult to mix. The main purpose of emulsification is to disperse the discontinuous phase into smaller droplets. The rotor-stator device is particularly suitable for emulsification tasks. The combined action of high shearing force and high expansion force in the mixing head makes the droplets small. In addition, the large turbulence enables the rotor-stator device to help transport emulsifier molecules quickly to the reformed surface.
Water and Oil Pot
Machine equipped A set of water and oil pot
Water pot capacity: 10-5000l, Oil pot capacity: 10-5000l
Power: 0.37-22kw, Siemens motor, Speed: 1440RPM
Electric heating by Water or Conduction Oil
Mixing: High shearing DISPERSER plates with baffle on wall
Half open hinged lid for easy operation
Machine equipped A set of water and oil pot
Water pot capacity: 10-5000l, Oil pot capacity: 10-5000l
Power: 0.37-22kw, Siemens motor, Speed: 1440RPM
Electric heating by Water or Conduction Oil
Mixing: High shearing DISPERSER plates with baffle on wall
Half open hinged lid for easy operation
Technical parameter
| Type | Workingcapacity | Homogenizer | Agitator | Vacuum pump | Heating power (KW) | ||||
| KW | r/min | KW | r/min | KW | Limit vacuum | Electrical heating | Steam heating | ||
| SCM-VA-100L | 100L | 4 | 0-3600 | 1.5 | 0~63 | 1.5 | -0.09 | 30 | 12 |
| SCM-VA-200L | 200L | 5.5 | 0-3600 | 2.2 | 0~63 | 2.2 | -0.09 | 45 | 16 |
| SCM-VA-300L | 300L | 7.5 | 0-3600 | 2.2 | 0~63 | 2.2 | -0.09 | 48 | 18 |
| SCM-VA-500L | 500L | 11 | 0-3600 | 4 | 0~63 | 3.85 | -0.09 | 60 | 24 |
| SCM-VA-1000L | 1000L | 15 | 0-3300 | 7.5 | 0~52 | 5.5 | -0.09 | 72 | 30 |
| SCM-VA-2000L | 2000L | 18.5 | 0-3300 | 11 | 0~45 | 7.5 | -0.09 | / | 49 |
| SCM-VA-3000L | 3000L | 22 | 0-3300 | 15 | 0~45 | 7.5 | -0.09 | / | 66 |
| SCM-VA-5000L | 5000L | 22 | 0-3300 | 18.5 | 0~38 | 11 | -0.09 | / | 77 |
Factory display
Company display
Showroom display
Engineering cases
Certifications
Shipping and packing
FAQ:
1.How to send my enquiry?
You can contact us by email, phone call, Instant Messenger
(Whatsapp/phone,We Chat).
2.How long can I get feedback after enquiry?
We will reply you within 2hrs.
3.What is the package?
Machines will be packed by plywood case.
Our Service:
Pre-sales service:
1> Engineering design
2> Equipment model selection guide
3> equipment machinig
After-sales service:
1> one year from date of delivery, if any spare parts be broken within warranty and not caused by improperly operation, we would offer the new parts for free.
2> Provide professional after-sales service engineers to abroad installation and debugging.
